B-Label 022, TECHNOLINE, self-adhesive plastic label, green-white, main switch, 15x50mm
B-Label 022 TECHNOLINE – engraved / self-adhesive descriptive label, green. Technical specifications, use, installation and selection of the correct variant.
Rate 24,43 CZK per 1 EUR. Prices are indicative, invoicing is in Czech crowns.
Self-adhesive plastic labels for marking machines, control cabinets and control devices, made with your text in various sizes and colour combinations. Send us the text, size and colour and we will prepare a quote.
B-Label 022 TECHNOLINE – engraved / self-adhesive descriptive label, green. Technical specifications, use, installation and selection of the correct variant.
B-Label 021 TECHNOLINE – engraved / self-adhesive descriptive label, yellow. Technical specifications, use, installation and selection of the correct variant.
B-Label 001 TECHNOLINE – engraved / self-adhesive descriptive label, yellow. Technical parameters, use, mounting and selection of the correct variant.
B-Label 020 TECHNOLINE – engraved/self-adhesive descriptive label, yellow. Technical parameters, use, mounting and selection of the correct variant.
BET60PE EMAS – descriptive label for control elements, yellow, 60 mm. Technical parameters, use, mounting and selection of the correct variant.
B-Label 002 TECHNOLINE – engraved/self-adhesive descriptive label, yellow. Technical parameters, use, mounting and selection of the correct variant.
B-Label 003 TECHNOLINE – engraved/self-adhesive descriptive label, yellow. Technical parameters, use, mounting and selection of the correct variant.
B-Label 023 TECHNOLINE – engraved / self-adhesive descriptive label, green. Technical specifications, use, installation and selection of the correct variant.
Prices include the recycling fee.
A plastic label helps the operator to identify a control element, device or warning. First determine what the reader should do or understand. The description of the main switch must clearly show the corresponding element; a warning about temperature or risk of injury must be placed at the relevant location. The label itself does not eliminate the risk and does not replace technical protective solutions.
| Step | What to document |
|---|---|
| Identification | text, dimension and mounting surface |
| Operational specification | environment and cleaning method |
| Reception | readability and assignment to element |
In the list, there are plastic self-adhesive labels TECHNOLINE for main switches, high temperature, electrical equipment or hand injury, as well as the EMAS label for the emergency stop button. Some items have dimensions of 15 × 50 mm or 25 × 65 mm. Dimensions, colours and construction must be verified for the specific code; they cannot be generalised to the entire branch.
Assess reading distance, lighting, contrast and obstacles in the vicinity. On a small surface, prioritise a clear name over a long sentence. When there are multiple similar switches, add a link to the marking in the diagram. Choose a location that remains readable even after cable and cover installation and is not commonly covered by the operator's hand.
Before application, compare the surface, temperature and cleaning method with the instructions for the selected label. Dust, grease, rough substrate or small contact area may reduce adhesion. Adhesion on painted doors and on rough or curved surfaces represents different conditions. Without documented data, do not assume universal resistance to oils, solvents, UV radiation or outdoor use.
For three main switches of different parts of the line, three times the same text without assignment is insufficient. Arrange the labels so that their marking corresponds to the documentation and is clear which part of the line the switch controls. Before applying, check the orientation and space when opening the doors. During maintenance, verify readability, peeled edges and match the description after any functional change.
It depends on the text size, contrast, distance and placement, not just on the external dimension.
The resistance of the specific material and adhesive must be documented for the given environment.
We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.
Choose which cookies we may use. You can change your choice at any time.
They keep the cart contents, your login and selected language, and protect forms from abuse. An order cannot be completed without them, so they are used even without consent.
Google Analytics shows us traffic and behaviour on the website in aggregated form. This tells us which pages are not working for people. We do not identify anyone from this data.