DC circuit breakers
A DC circuit breaker protects a DC circuit against overcurrent within the limits of its intended use. This range includes single-pole variants designated EKM1-63DC and EKM1-63DCH. For the correct choice, you need more than the load current: the maximum operating voltage, the character of the source, fault conditions and the wiring diagram prescribed for the specific device are also decisive.
Why AC parameters cannot be adopted without verification
Alternating current regularly passes through zero, which helps when interrupting an arc. In a DC circuit, such a natural zero crossing is missing. The ABB technical overview therefore emphasises the specific requirements of DC breaking. A designation for AC, even with a sufficiently high voltage figure, does not prove the ability to break a DC short circuit.
The connection must respect the product documentation. If polarity or the direction of energy flow is prescribed, it must be observed. Not all DC devices have the same conditions, and the property of one model must not be generalised to the whole category. Similarly, poles cannot be arbitrarily connected to multiply the permissible voltage.
Voltage belongs to a specific pole arrangement
The manufacturer page ETEK EKM1-63DC distinguishes voltage data according to the number of poles. The value stated for a multi-pole assembly therefore cannot be transferred to a single-pole product. At the same time, this is documentation of a specific published series, not automatic confirmation of all historical CHANA variants. For the order, require agreement of the full code and the corresponding data sheet.
Source, load and short-circuit current
The rated consumption of the equipment, the short-term inrush current and the prospective short-circuit current are three different items of the brief. Confusing them can lead to an unsuitable selection. A battery source and an electronically limited power supply may not behave the same way in the event of a fault; the design must be based on the documented properties of the specific source and the whole current path.
Verify not only the ability of the circuit breaker to interrupt the fault safely, but also its tripping conditions. In the documentation, state where the assessed fault condition is located. A numerical value without voltage, location and calculation conditions cannot be reliably used to compare offers.
Author's example of preparing a brief
The model equipment has six branches each consuming 0.25 A, i.e. a total of 1.5 A with assumed simultaneous operation. This calculation is useful for the load list, but it does not determine the rated value of the circuit breaker. It does not include start-ups, the current capacity of the cable or the behaviour of the source in a short circuit. Therefore add all these data separately to the design table; the figures of the example are not parameters of the products offered.
Mounting and functional verification
Both the project and the service documentation should contain the exact type, permitted wiring, connection conditions and coordination with other protection. When changing the source or connecting another battery, also reassess the protection. Unchanged operating consumption alone does not prove that the fault conditions have remained the same.
Entrust diagnostics and interventions to a qualified person. After repeated tripping, record the state of the source, the connected load and the moment of the fault. Do not disable the protection and do not verify its operation with an improvised short circuit.
FAQ
Is every DC circuit breaker suitable for photovoltaics?
Not automatically. The specific application, voltage, current conditions, pole wiring and system requirements must be verified. The letters DC alone do not confirm this conformity.
Can I use the curve of the AC variant with the same name?
Only if the manufacturer explicitly confirms its validity for the DC version. Otherwise, use the documentation of the exact DC code. Back to the CHANA overview.