CHANA circuit breakers and RCDs
The CHANA branch groups devices for different tasks: protection of AC circuits, protection of DC circuits, residual current devices and accessories. When selecting, first determine the required function and only then the current value. The abbreviations EKM1 and EKL1 are not interchangeable, and a suffix of a similar name may not mean just a mechanical difference.
Start with the right subcategory
- AC circuit breakers: the range includes EKM1-63 and EKM1-63H versions in various current values and pole configurations.
- Circuit breakers for DC circuits: compare explicit DC data and the specific wiring, not values taken from the AC series.
- CHANA residual current devices: check the residual sensitivity, type and separately also the actual overcurrent function.
- Accessories: choose the auxiliary contact according to exact mechanical and electrical compatibility.
Reading the type designation without guessing
Create a comparison row containing the series, suffix, number of poles, current, characteristic and voltage. The manufacturer pages distinguish EKM1-63 with a rating of 6 kA and EKM1-63H with a rating of 10 kA. However, always relate the specific breaking capacity to the stated voltage, type of current and documentation of the piece ordered. It is not the normal operating current of the circuit.
The designations 1P+N and 3P+N indicate handling of the neutral pole. Do not derive the number of overcurrent-protected poles from the number of modules alone; the manufacturer's diagram is decisive. Likewise, the AC designation of the RCD residual type cannot be read as a complete description of all properties of the supplied circuit.
How to prepare an unambiguous order
When replacing an existing device, record not only the front rating plate but also its function in the machine documentation. Then separate the requirements that must remain the same from those that the designer will reassess. These include cable protection, load start-up, upstream protection, location in the control cabinet and the need for remote signalling. Do not substitute missing data with data from a similar product.
Author's model comparison of variants
The model brief contains a single-phase circuit, a requirement of 10 A and signalling to the control system. These three pieces of information do not yet determine the order code. The voltage, characteristic, required breaking capacity and type of reported event are missing, among others. Adding an auxiliary contact to the list is correct only after verifying that it reports the required state and is compatible with the selected circuit breaker. The example does not prescribe specific protection.
Connection and service documentation
When designing the assembly, also allow space for conductors, labels and accessories. For mounting, use the terminal data of the specific product, not a general torque for all modular devices. After commissioning, keep the full code and the data sheet used in the documentation. This will make future searches for spare parts much more precise.
In the event of a fault, distinguish which protective element actually tripped and under what circumstances. A general report “the breaker tripped” may hide the difference between an overcurrent and a residual event. Finding the cause, measurements and interventions in the control cabinet belong to a qualified person.
FAQ
Are all products of the same series interchangeable?
No. Evaluate the complete code, electrical parameters, pole diagram, connection and accessory compatibility. A similar name is only the beginning of the comparison.
Can overload protection be assumed from the name of an RCD?
No. The distinction between RCCB and RCBO must be confirmed by the documentation of the exact version. Resolve any uncertainty before designing the downstream protection.