Phone +420 774 723 123 Cart · 0 · empty

IFM magnetic sensors

ifm magnetic sensors (e.g. MK5101) for sensing piston position on pneumatic cylinders with T-slot. Choose by slot, output and connection.

Filters
Found 1 products
OUR TIP

MK5101, IFM, magnetic sensor, MKT3028BBPKG/G/0, 3M/ZH/AS

Cat. no.: MK5101

MK5101 IFM – magnetic sensor, M8, PNP. Industrial product for automation, detection or measurement.

On request
45,61 €
excl. VAT · 55,19 € incl. VAT

Prices include the recycling fee.

IFM magnetic sensors

This category contains MK5101 with the full designation MKT3028BBPKG/G/0.3M/ZH/AS. When choosing a replacement, keep both codes: the short order number and the full version. IFM classifies MK5101 among sensors with a GMR cell, i.e. a semiconductor magnetoresistive principle; it is not a reed contact. See the IFM cylinder sensor overview.

Version MK5101 and suitability for installation

MK5101 is designed for the T-slot. It has a PNP/NO switching output, 10–30 V DC supply and a PUR cable 0.3 m long with a three-contact A-coded M8, connector. The body measures 25 × 5 × 6.5 mm. These are parameters of the specific model according to the datasheet MK5101.

When comparing versions, separate the slot shape, output function and connection. Do not solve a requirement for a C-slot, a different output type or a long fixed cable just by matching the IFM brand. First draw up a list of machine requirements and confirm for each whether this specific code meets it.

Mounting and cabling preparation

For MK5101 the manufacturer specifies a fixing eccentric with a combined tool slot and an internal hexagon of 1.5 mm. A rubber positioning element and a cable clip are included in the delivery. The mounting design and package contents are documented by the Czech datasheet MK5101.

Include access to the fixing and space for the mating connector in the installation preparation. Check that the cable does not remain taut or caught when surrounding parts move. Before removing the original unit, document its position and cable route; after replacement, record the actually verified setting.

Selection procedure for a replacement

  1. Copy the type of cylinder and original sensor. Compare the slot profile with the drawing MK5101 and check the space around the fixing.
  2. In the machine diagram, check the supply, the expected signal function and the PLC input. Assess mechanical compatibility separately from electrical compatibility.
  3. Choose the connecting cable according to the mating part design and contact wiring. Also store its order code in the service list.
  4. After fitting, test repeated piston approaches and record the input changes in the controller. Also carry out the check in the normal working cycle.

Specific example of using MK5101

When replacing a sensor on a T-slot cylinder, MK5101 may be a candidate for an input expecting PNP/NO. However, complete the approval of the replacement only after comparing the drawing and wiring. Add the monitored position, the cable used and the result of the function test to the acceptance record; this creates a basis for future service of the same machine.

Common mistakes and FAQ

Can the cable be kept based only on the designation M8?

No. Also compare the connection method and the number and assignment of contacts. When replacing, it is not enough to check that the connectors look similar.

Does switching confirm completed clamping?

The piston position signal alone does not prove the clamping force or correct gripping of the part. The evaluation conditions for the whole operation must match the design and requirements of the machine.

Other versions can be compared among magnetic sensors. For connection use Sensor Cables and Connectors; help with assessing the assembly is available from technical support.

Cookies on this website

We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.