Phone +420 774 723 123 Cart · 0 · empty

Balluff magnetic sensors

Balluff BMF magnetic sensors for sensing piston position on pneumatic cylinders with T- and C-slots and on round cylinders. Choose by slot, output and connection.

Filters
Found 4 products
OUR TIP

BMF00C4, BALLUFF, magnetic sensor, 10-30VDC, PNP, NO, cable 0, 3m + connector M8/3

Cat. no.: BMF00C4

BMF00C4 BALLUFF – magnetic sensor, M8, PNP, NO (normally open), T-slot, PUR cable 0.3m + connector M8x1/3pin. Industrial product for automation, detection or measurement.

On request
37,99 €
excl. VAT · 45,96 € incl. VAT
OUR TIP

BMF0072, BALLUFF, magnetic sensor

Cat. no.: BMF0072

BMF0072 BALLUFF – magnetic sensor, M8, PNP, NO (normally open), T-slot, PUR cable 0.3m + connector M8x1/3pin. Industrial product for automation, detection or measurement.

On request
55,92 €
excl. VAT · 67,66 € incl. VAT

Prices include the recycling fee.

Balluff magnetic sensors

With Balluff sensors, start with the mechanical design. This category lists BMF00C4, BMF00EL, BMF0072 and BMF000P. The selection therefore includes different designs, not a single interchangeable sensor for all cylinders. When replacing, record both the short order code and the full type designation of the original part.

Slot design and separate housing

BMF00C4 fits a T-slot and allows insertion from above. In contrast, BMF00EL is a version for the C-slot; the manufacturer explicitly excludes Festo ADVC and AEVC cylinders for it. The cylinder brand alone therefore does not determine compatibility. Details are given in Balluff BMF00C4 and Balluff BMF00EL.

The cylindrical BMF000P requires a different assessment of fixing than the slot models. The manufacturer describes it as a magnetic field sensor mounted with clamps. For bracket design, therefore, work with its drawing and the position of the magnetic target. See official version BMF000P.

Procedure for selecting a replacement part

  1. Copy the cylinder designation and photograph the slot, fixing and outlet of the original sensor. Note whether access is from above or only from the end.
  2. Compare the candidate's drawing with the installation location. Also check the space for the tool, connector and natural cable bend.
  3. Before ordering, compare the output, supply and PLC input wiring. Write the specific code in the replacement list, not just the BMF designation.
  4. After mounting, record the setting position and test repeated piston approaches from both directions. Also evaluate the result during the normal working cycle.

Example found: BMF00C4

For the specific BMF00C4 Balluff specifies a PNP/NO output, 10–30 V DC supply and a PUR cable 0.3 m long with a three-pole M8. connector. These data apply to this particular code. When preparing the connection, check the contact assignment of the connecting cable according to the manufacturer's product sheet.

For maintenance of several similar cylinders, create a list of verified combinations: actuator, sensor and connecting cable. For each machine, also record the space constraints. The selection will then not depend only on the similarity of a photo or the availability of one spare part in stock.

Common mistakes when replacing

  • Selection based only on the cable length, without checking the body shape and fixing.
  • Taking the parameters of one BMF as common properties of the whole brand.
  • Assuming that a mechanically similar connector automatically allows the original wiring to be retained.

FAQ on Balluff versions

Can BMF00EL be inserted into any C-slot?

Always verify compatibility according to the cylinder. The manufacturer's exceptions mentioned above show why the slot designation is only the first step of selection.

What should be provided with a replacement enquiry?

Prepare the full sensor code, cylinder type, a photo of the installation and the input diagram. Add the reason for replacement: damaged cable, change of connection or unsuitable installation. This will make it possible to assess the actual problem.

Other brands can be compared in the category Magnetic Sensors. For connection, visit Sensor Cables and Connectors; consult an unclear replacement with technical support.

Cookies on this website

We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.