Phone +420 774 723 123 Cart · 0 · empty

Pneumatic cylinders

SMC and Festo pneumatic cylinders – ISO, compact, miniature, round, guided and rodless. Choose by bore, stroke, required force, mounting and position sensing.

Filters
Found 414 products

TP96SDB80-300C, SMC, pneumatic cylinder, cylinder diameter 80 mm, stroke 300 mm, ISO15552

Cat. no.: TP96SDB80-300C

TP96SDB80-300C, SMC, pneumatic cylinder, cylinder diameter 80 mm, stroke 300 mm, ISO15552. A pneumatic cylinder converts the energy of compressed air into linear motion.

On request
156,53 €
excl. VAT · 189,40 € incl. VAT

TP96SDB80-320C, SMC, pneumatic cylinder, cylinder diameter 80 mm, stroke 320 mm, ISO15552

Cat. no.: TP96SDB80-320C

TP96SDB80-320C, SMC, pneumatic cylinder, cylinder diameter 80 mm, stroke 320 mm, ISO15552. A pneumatic cylinder converts the energy of compressed air into linear motion.

On request
158,37 €
excl. VAT · 191,63 € incl. VAT
OUR TIP

CDQ2A63-175DCMZ, SMC, compact cylinder, diameter 63 mm, stroke 175 mm

Cat. no.: CDQ2A63-175DCMZ

CDQ2A63-175DCMZ, SMC, compact cylinder, diameter 63 mm, stroke 175 mm. A compact cylinder creates linear pneumatic motion with a short installation length.

On request
159,23 €
excl. VAT · 192,67 € incl. VAT

MGJ10-15, compact cylinder, SMC

Cat. no.: MGJ10-15

MGJ10-15, compact pneumatic cylinder with slide bearing, SMC

On request
162,91 €
excl. VAT · 197,13 € incl. VAT

TP96SDB80-400C, SMC, pneumatic cylinder, cylinder diameter 80 mm, stroke 400 mm, ISO15552

Cat. no.: TP96SDB80-400C

TP96SDB80-400C, SMC, pneumatic cylinder, cylinder diameter 80 mm, stroke 400 mm, ISO15552. A pneumatic cylinder converts the energy of compressed air into linear motion.

On request
165,74 €
excl. VAT · 200,54 € incl. VAT

MGJ10-10, compact cylinder, SMC

Cat. no.: MGJ10-10

MGJ10-10, compact cylinder, slide bearing, SMC

On request
167,42 €
excl. VAT · 202,57 € incl. VAT

MGPM12-20Z, SMC, compact cylinder, diameter 12 mm, stroke 20 mm

Cat. no.: MGPM12-20Z

MGPM12-20Z, SMC, compact cylinder, diameter 12 mm, stroke 20 mm. A guided cylinder combines linear motion with guidance against rotation and lateral load.

On request
167,83 €
excl. VAT · 203,07 € incl. VAT

ADNGF-32-130-P-A, Festo, compact cylinder, 537127

Cat. no.: ADNGF-32-130-P-A

ADNGF-32-130-P-A, Festo, compact cylinder, 537127. The air preparation element filters, regulates or otherwise prepares the compressed air for the pneumatic system.

On request
172,74 €
excl. VAT · 209,01 € incl. VAT

TP96SDB80-500C, SMC, pneumatic cylinder, cylinder diameter 80 mm, stroke 500 mm, ISO15552

Cat. no.: TP96SDB80-500C

TP96SDB80-500C, SMC, pneumatic cylinder, cylinder diameter 80 mm, stroke 500 mm, ISO15552. A pneumatic cylinder converts the energy of compressed air into linear motion.

On request
174,95 €
excl. VAT · 211,69 € incl. VAT

MGJ10-20, compact cylinder, SMC

Cat. no.: MGJ10-20

compact cylinder; piston diameter: 10mm; stroke: 20mm; SMC

On request
175,19 €
excl. VAT · 211,99 € incl. VAT

TP96SDB100-25C, SMC, pneumatic cylinder, cylinder diameter 100 mm, stroke 25 mm, ISO15552

Cat. no.: TP96SDB100-25C

TP96SDB100-25C, SMC, pneumatic cylinder, cylinder diameter 100 mm, stroke 25 mm, ISO15552. A pneumatic cylinder converts the energy of compressed air into linear motion.

On request
178,26 €
excl. VAT · 215,70 € incl. VAT

TP96SDB100-30C, SMC, pneumatic cylinder, cylinder diameter 100 mm, stroke 30 mm, ISO15552

Cat. no.: TP96SDB100-30C

TP96SDB100-30C, SMC, pneumatic cylinder, cylinder diameter 100 mm, stroke 30 mm, ISO15552. A pneumatic cylinder converts the energy of compressed air into linear motion.

On request
178,26 €
excl. VAT · 215,70 € incl. VAT

MKB20-30RZ, SMC, rotary clamp cylinder, diameter 20 mm, stroke 30 mm

Cat. no.: MKB20-30RZ

MKB20-30RZ, SMC, rotary clamp cylinder, diameter 20 mm, stroke 30 mm. A pneumatic cylinder converts the energy of compressed air into linear motion.

On request
179,29 €
excl. VAT · 216,94 € incl. VAT

TP96SDB100-40C, SMC, pneumatic cylinder, cylinder diameter 100 mm, stroke 40 mm, ISO15552

Cat. no.: TP96SDB100-40C

TP96SDB100-40C, SMC, pneumatic cylinder, cylinder diameter 100 mm, stroke 40 mm, ISO15552. A pneumatic cylinder converts the energy of compressed air into linear motion.

On request
179,37 €
excl. VAT · 217,04 € incl. VAT

CD55B100-40M, SMC, pneumatic cylinder, diameter 100 mm, stroke 40 mm, magnet

Cat. no.: CD55B100-40M

CD55B100-40M, SMC, pneumatic cylinder, diameter 100 mm, stroke 40 mm, magnet. A pneumatic cylinder converts the energy of compressed air into linear motion.

On request
179,70 €
excl. VAT · 217,43 € incl. VAT

MGPM16-20Z, SMC, compact cylinder, diameter 16 mm, stroke 20 mm

Cat. no.: MGPM16-20Z

MGPM16-20Z, SMC, compact cylinder, diameter 16 mm, stroke 20 mm. A guided cylinder combines linear motion with guidance against rotation and lateral load.

On request
180,11 €
excl. VAT · 217,93 € incl. VAT

TP96SDB100-50C, SMC, pneumatic cylinder, cylinder diameter 100 mm, stroke 50 mm, ISO15552

Cat. no.: TP96SDB100-50C

TP96SDB100-50C, SMC, pneumatic cylinder, cylinder diameter 100 mm, stroke 50 mm, ISO15552. A pneumatic cylinder converts the energy of compressed air into linear motion.

On request
180,47 €
excl. VAT · 218,37 € incl. VAT

TP96SDB100-60C, SMC, pneumatic cylinder, cylinder diameter 100 mm, stroke 60 mm, ISO15552

Cat. no.: TP96SDB100-60C

TP96SDB100-60C, SMC, pneumatic cylinder, cylinder diameter 100 mm, stroke 60 mm, ISO15552. A pneumatic cylinder converts the energy of compressed air into linear motion.

On request
181,58 €
excl. VAT · 219,71 € incl. VAT
OUR TIP

MXH10-30Z, SMC, compact cylinder, diameter 10 mm, stroke 30 mm, magnet

Cat. no.: MXH10-30Z

MXH10-30Z, SMC, compact cylinder, diameter 10 mm, stroke 30 mm, magnet. A linear slide or carriage combines linear motion with precise mechanical guidance.

On request
182,15 €
excl. VAT · 220,41 € incl. VAT

Pneumatic cylinder TP96SDB100-70C, cylinder diameter 100mm, stroke 70mm, ISO15552

Cat. no.: TP96SDB100-70C

pneumatic cylinder with a diameter of 100mm, piston rod stroke 70mm, maximum working pressure 10bar, built-in magnet, air connection thread G1/2", double-acting, CNOMO and C-slot for sensors…

On request
182,69 €
excl. VAT · 221,05 € incl. VAT

Pneumatic cylinder TP96SDB100-80C, cylinder diameter 100mm, stroke 80mm, ISO15552

Cat. no.: TP96SDB100-80C

pneumatic cylinder with a diameter of 100mm, piston rod stroke 80mm, maximum working pressure 10bar, built-in magnet, air connection thread G1/2", double-acting, CNOMO and C-slot for sensors…

On request
183,79 €
excl. VAT · 222,39 € incl. VAT

Pneumatic cylinder TP96SDB100-100C, cylinder diameter 100mm, stroke 100mm, ISO15552

Cat. no.: TP96SDB100-100C

pneumatic cylinder with a diameter of 100mm, piston rod stroke 100mm, maximum working pressure 10bar, built-in magnet, air connection thread G1/2", double-acting, CNOMO and C-slot for sensors…

On request
186,00 €
excl. VAT · 225,06 € incl. VAT

Prices include the recycling fee.

Pneumatic cylinders

A pneumatic cylinder converts the energy of compressed air into linear motion. It moves a part, presses a tool or operates a mechanism. The range includes, for example, the SMC CJP, CQ2, CQS, CD85, JCQ, MGP and MY1 series as well as Festo cylinders. In addition to actuators, there are GKM clevises and KJ rod ends; when ordering, therefore, distinguish the cylinder itself from its accessories.

Principle: pressure, area and direction of movement

Pressure acts on the effective area of the piston. In a double-acting cylinder, air is supplied alternately to both chambers and the opposite chamber is exhausted. A single-end rod reduces the area for retracting, so at the same overpressure the theoretical force is lower than when extending. This difference is also shown by SMC force table C95.

In the single-acting version with a return spring, air provides the working movement and the spring the return. When extending, its resistance must also be overcome. The design is illustrated by SMC CJP manual. Single-acting and double-acting versions therefore require a different assessment of the working and return movement.

Selection by task and space

First determine the required stroke, the direction of load and the force during the whole cycle. Then compare the diameter, permissible pressure, speed and temperature of the specific version. Check the dimensions in the retracted and extended position, the body mounting, the piston rod end and the space for connection. It is not enough to select only the same diameter and stroke.

A lateral load requires a separate assessment of the guide. For example, SMC MGP connects the cylinder with a guide structure. The force in the axis of movement is not the same as the permissible load on the guide. When replacing, compare the full order code and drawing; a similar series designation does not guarantee an identical version.

For an enquiry, prepare a description of the working cycle: what moves, from where to where, with what load and how often. For a replacement, add a photo of the nameplate and mounting. Write down the required properties and data not yet verified separately; this makes checking the offered version easier.

Our own model calculation: force difference

Let us consider a fictitious double-acting cylinder with a piston diameter D = 30 mm, a piston rod d = 12 mm and an overpressure p = 0.45 MPa. In the model, the opposite chamber has zero overpressure; we neglect friction and dynamics. Since 1 MPa = 1 N/mm², the area for extending A = πD²/4 is 706.9 mm² and the force F = pA approximately 318.1 N. For retracting, A = π(D² − d²)/4 = 593.8 mm² and F approximately 267.2 N.

The difference is 50.9 N. This is our own tutorial model, which does not define product selection or a guaranteed force. An actual design must take into account back pressure, friction, load and an operating reserve.

Mounting and commissioning

Before intervention, secure the load, disconnect the energy supplies and release residual pressure. Align the cylinder axis with the guide of the mechanism and verify free movement over the whole stroke. Protect the piston rod from scratches and the fittings from dirt. Set the speed gradually from a low value; also verify the permissible end-of-stroke energy. The procedure is detailed in SMC manual CQ2.

Diagnostics of irregular movement

In case of jerking or loss of force, check the pressure during operation, the patency of the supply, the speed setting, leaks and alignment. Compare the change in cycle time with the original state. Increasing pressure without finding the cause can mask a mechanical problem. In case of hard end-of-stroke impact, assess speed and load; separate shock absorbers select according to the specific energy requirement.

FAQ

Does the theoretical force value guarantee the actual force on the part?

No. It is the ideal result of pressure and area; the actual movement is also affected by back pressure and mechanical resistance.

Can a position sensor be added to every cylinder?

Verify compatibility for the specific cylinder, its equipment and mounting method. The range can be found among with magnetic sensors; the similarity of the slot alone is not enough.

Cookies on this website

We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.