Fittings for cable conduits
A fitting for a cable conduit terminates a protective tube at an enclosure, device or other mounting point. One side of it matches the conduit, the other the mounting hole. Both interfaces must be selected at the same time. For the route itself, continue to cable conduits and accessories; if you are sealing the cable sheath directly without a tube, look for a cable gland.
The same thread does not mean the same conduit
The range includes ORTAC ODB straight fittings with PG and metric threads as well as straight or angled Turkuaz versions. For ORTAC, for example, ODB13-M16 relates to a conduit with an outer diameter of 13 mm, while ODB15-M16 relates to a diameter of 15.8 mm. The dimensional assignment is given in the ORTAC fitting tables. An identical M16 part therefore does not mean interchangeability on the tube side.
For a fitting for corrugated conduit, the profile and design series of the tube may also be decisive. The outer diameter is necessary information, but may not be a complete description of compatibility. Do not consider a combination of different brands as confirmed just on the basis of the same size in the commercial name.
Straight and angled outlet
The straight version runs the route in the axis of the mounting hole. An angled part may help with the required direction, but has its own installation space and access conditions. The category includes, for example, Turkuaz TGR-P16S and the angled TGDR-P16S for the corresponding conduit. Do not choose an angle just according to whether the part fits into the drawing.
After assembly, there must be space for the actual cable bend and for mechanically fixing the connected route. The fitting is not a suitable point for uncontrolled levering by a long conduit. Plan the supports so that the operating load corresponds to the conditions of the specific components.
Holding the tube and strain relief of the cable are different functions
Securing the conduit does not automatically mean securing every cable inside. The manufacturer also distinguishes a special ORTAC version with separate cable retention. This design feature cannot be attributed to an ordinary ODB fitting or another similar part without verification.
The tightness of the route also depends on the specific combination of tube, fitting, any seals and the equipment wall. One declared value for a component is not a universal property of all assemblies. When ordering, also check the necessary mounting accessories, because the same thread may be fixed into a threaded hole or by another documented method.
Model example of two entries
Our own enclosure design contains two entries with the same metric thread. A conduit of size 13 mm arrives at the first, 15.8 mm at the second. Although the holes are identical, the bill of materials needs two corresponding variants on the conduit side. Buying two identical fittings by thread would not solve one route.
If the second entry also lacks space for straight routing, the angled version and its compatibility are assessed again. It is not just a change of direction: a different part may change the required mounting space and access to the fixing.
FAQ
Can I choose a fitting just by the PG designation?
No. The thread handles the connection to the enclosure, but does not prove the size and profile of a compatible conduit.
Does a fitting automatically hold the cable against pull-out?
Not necessarily. Distinguish between holding the conduit and separate strain relief of the cable; the specific function must be stated in the part's documentation.