Connecting accessories

Connecting parts for assembling air preparation units – spacers, branch blocks and brackets. Choose by air preparation unit series.

Filtry
Znaleziono 12 produktów
DOSTĘPNY

TEAL-AW-AR3000, TECHNOLINE, Connecting spacer for AL-AW-AR 3000

Nr kat.: TEAL-AW-AR3000

TEAL-AW-AR3000 TECHNOLINE – Connecting spacer for AL-AW-AR 3000. The exact variant is determined by the manufacturer's order code.

Dostępny 5 i więcej szt.
5,17 €
bez VAT · 6,25 € z VAT
DOSTĘPNY

TEAL-AW-AR2000, TECHNOLINE, Connecting spacer for AL-AW-AR 2000

Nr kat.: TEAL-AW-AR2000

TEAL-AW-AR2000 TECHNOLINE – Connecting spacer for AL-AW-AR 2000. The exact variant is determined by the manufacturer's order code.

Dostępny 5 i więcej szt.
5,17 €
bez VAT · 6,25 € z VAT
DOSTĘPNY

TEAL-AW-AR1000, TECHNOLINE, Connecting spacer for AL-AW-AR 1000

Nr kat.: TEAL-AW-AR1000

TEAL-AW-AR1000 TECHNOLINE – Connecting spacer for AL-AW-AR 1000. The exact variant is determined by the manufacturer's order code.

Dostępny 5 i więcej szt.
5,17 €
bez VAT · 6,25 € z VAT
DOSTĘPNY

C4SF, SMC, polycarbonate bowl for AF/AW40

Nr kat.: C4SF

C4SF, SMC, polycarbonate bowl for AF/AW40. It is a specific industrial component or accessory intended for the given product series.

Dostępny 2 ks
15,17 €
bez VAT · 18,36 € z VAT

AR23P-270AS, SMC, mounting bracket for the AR20(K)-B series regulator

Nr kat.: AR23P-270AS

AR23P-270AS SMC – mounting bracket for the AR20(K)-B series regulator. When selecting, verify the connection, size and other parameters of the specific variant.

Na zapytanie
2,38 €
bez VAT · 2,88 € z VAT

Y400-D, SMC, spacer (connecting element)

Nr kat.: Y400-D

Y400-D, SMC, spacer (connecting element). The mounting part is used for mechanical fixing or connection of a specific element.

Na zapytanie
4,35 €
bez VAT · 5,26 € z VAT

E400-F04-D, SMC, female threaded end piece, axial thread

Nr kat.: E400-F04-D

E400-F04-D, SMC, female threaded end piece, axial thread. The mounting part is used for mechanical fixing or connection of a specific element.

Na zapytanie
5,66 €
bez VAT · 6,85 € z VAT

Y400T-1-D, SMC, spacer with mounting bracket (connecting element), extended version

Nr kat.: Y400T-1-D

Y400T-1-D, SMC, spacer with mounting bracket (connecting element), extended version. The mounting part is used for mechanical fixing or connection of a specific element.

Na zapytanie
11,07 €
bez VAT · 13,40 € z VAT

Y410-F03-D, SMC, single branch tee (connecting element)

Nr kat.: Y410-F03-D

Y410-F03-D, SMC, single branch tee (connecting element). It is a specific industrial component or accessory intended for the given product series.

Na zapytanie
11,81 €
bez VAT · 14,29 € z VAT

C3SF, SMC, polycarbonate bowl for AF/AW30

Nr kat.: C3SF

C3SF, SMC, polycarbonate bowl for AF/AW30. It is a specific industrial component or accessory intended for the given product series.

Na zapytanie
13,53 €
bez VAT · 16,37 € z VAT

Y44-F02-D, SMC, four-way branch, for modular air preparation units

Nr kat.: Y44-F02-D

Y44-F02-D, SMC, four-way branch, for modular air preparation units. It is a specific industrial component or accessory intended for the given product series.

Na zapytanie
16,61 €
bez VAT · 20,10 € z VAT

AR40M-F0403-D, SMC, modular pressure regulators

Nr kat.: AR40M-F0403-D

AR40M-F0403-D, SMC, modular pressure regulators. The air preparation element filters, regulates or otherwise prepares the compressed air for the pneumatic system.

Na zapytanie
50,03 €
bez VAT · 60,54 € z VAT

Ceny zawierają opłatę recyklingową.

Connecting accessories for air preparation units

Connecting accessories of the air preparation unit address the mechanical seating and continuity of the individual modules. The same brand is not enough to confirm dimensional conformity. Compare the series, size, seals and mounting procedure of all connected parts.

Selection data Connecting accessories

Step What to document
Identification series and size of both modules
Operating requirements mounting and sealing parts
Acceptance assembly and tightness of the joint

Choose accessories according to the interface of the specific modules and the function of the joint. First, we recommend compiling a list of the full codes of the adjacent elements, drawing the flow direction and marking the fixing points. Only then choose spacers, branches and end pieces. This procedure helps prevent ordering a part that looks similar but whose purpose has not been verified for the designed assembly.

Connection, mounting and branching

The SMC AC-D mounting drawing distinguishes the spacer, retaining parts, screws and seals. The bracket variant adds a fixing element. Tightness is ensured by a correctly assembled interface including the seal; the mere presence of screws does not confirm that the joint is complete. When designing, therefore, assess the pneumatic connection and the mechanical fixing as two related requirements.

The listing includes Y400-D, Y400T-1-D, E400-F04-D, Y410-F03-D and Y44-F02-D from SMC. TECHNOLINE has separate items TEAL-AW-AR1000, TEAL-AW-AR2000 and TEAL-AW-AR3000. To verify continuity, we recommend comparing the drawing of both mating parts, the seal number and the full version. An identical part of the designation is not by itself proof of interchangeability.

Mounting a modular connection

The AC-D manual requires residual pressure to be removed and the regulator setting to be released before dismantling. During assembly, the projection of the spacer must sit in the corresponding recess. The modules are aligned in a straight line and the screws are tightened evenly according to the value for the given size. After replacement, the function and external leakage are checked. The tightening torque of another thread or series is not a substitute for this instruction.

Our own design check before ordering

In the assembly sketch, we recommend adding the side space for tools and the vertical space needed to service the bowls. Separate dimensions from working clearances: the width of a component is not the same as the space needed to replace it. Also check the path of the removed part: the space below the bowl may be sufficient, but a side obstacle may prevent tool access. We recommend carrying out this check already in the assembly sketch. For each branch, note which preparation stages precede it and which consumers it will supply.

For a new branch, compile your own consumption table. Assess the common section according to simultaneity and a separate branch according to its working cycle. If you are adding another function, for example lubricator, go through the order of the whole assembly again. Keep a record of the full codes together with the drawing, so that a future replacement is based on the version actually used.

Model calculation of space for the assembly

This is purely our own geometric model, not dimensions of SMC or TECHNOLINE products. Let us assume three modules with widths of 44, 58 and 46 mm. Two joints each add 6 mm; we choose an end clearance of 18 mm on each side. The total required width according to these assumptions is 44 + 58 + 46 + 2 × 6 + 2 × 18 = 196 mm.

In a panel 220 mm wide, 24 mm would remain. However, this result does not verify access to the bowls or the rear connection. For a specific assembly, we recommend checking in the drawing; the joint increment must not be added again if the manufacturer's overall dimension already includes it.

FAQ

What to check in case of a leak between modules?

The AC-D manual mentions damage to the seal or loose retaining screws. After depressurising, check the assembly and follow the relevant mounting instructions.

Is the same thread size enough for connection?

For selection, require a documented modular interface, the corresponding size and the specific accessories. The external port and the interface between bodies are two separate parts of the design.

Primary source: SMC AC-D, mounting instructions and joint drawing.

Pliki cookies na tej stronie

Techniczne pliki cookies są potrzebne do działania koszyka i zamówienia — są używane zawsze. Analityczne pliki cookies pokazują nam, których stron ludzie szukają i gdzie się gubią, i pomagają nam ulepszać sklep. Użyjemy ich tylko wtedy, gdy na to pozwolisz. Więcej w zasadach przetwarzania danych.