Rievtech Power Supplies

Rievtech RPS and RPS-S series DIN rail power supplies for powering PLCs, relays and sensors. They are an affordable choice for smaller cabinets. Choose by output voltage and current with reserve for inrush peaks.

Filtry
Znaleziono 7 produktów
DOSTĘPNY

RPS-15-24, Rievtech, switched-mode DIN-rail power supply, 24VDC/0.63A, 15W

Nr kat.: RPS-15-24

RPS-15-24, Rievtech: DIN-rail power supply for powering automation, output 24VDC/0.63A, 15W, input 85–264VAC.

Dostępny 2 ks
17,35 €
bez VAT · 20,99 € z VAT
DOSTĘPNY

RPS-15-S24 – Rievtech – slim switched-mode DIN-rail power supply, 24VDC/0.65A, 15W, 90–264VAC

Nr kat.: RPS-15-S24

RPS-15-S24 – Rievtech – slim switched-mode DIN-rail power supply, 24VDC/0.65A, 15W, input 90–264VAC. DIN rail, efficiency 84.5%, operation −25 to +70°C, dimensions 103.7×32×97.5mm.

Dostępny 5 i więcej szt.
19,52 €
bez VAT · 23,62 € z VAT
DOSTĘPNY

RPS-45-24, Rievtech, switched-mode DIN-rail power supply, 24VDC/2A, 48W

Nr kat.: RPS-45-24

RPS-45-24, Rievtech, industrial switched-mode DIN-rail power supply: output 24VDC/2A (48W), input 85–264VAC, output adjustment 21.6–26.4VDC.

Dostępny 5 i więcej szt.
28,31 €
bez VAT · 34,25 € z VAT
DOSTĘPNY

RPS-60-24, Rievtech, switched-mode DIN-rail power supply, 24VDC/2.5A, 60W

Nr kat.: RPS-60-24

The Rievtech power supply RPS-60-24 creates a regulated output of 24VDC for supplying control circuits. It continuously delivers a rated current of 2.5A; for this model, the manufacturer states 60W.

Dostępny 5 i więcej szt.
30,11 €
bez VAT · 36,43 € z VAT
DOSTĘPNY

RPS-60-S24, Rievtech, switched-mode DIN-rail power supply, 24VDC/2.5A, 60W

Nr kat.: RPS-60-S24

RPS-60-S24, Rievtech, switched-mode DIN-rail power supply, 24VDC/2.5A, 60W. Model S24 of the RPS-60-S series provides DC power for control circuits with an output current of 2.5A.

Dostępny 5 i więcej szt.
32,32 €
bez VAT · 39,11 € z VAT
DOSTĘPNY

RPS-100-24 – Rievtech – switched-mode DIN-rail power supply, 24VDC/4A, 96W, 85–264VAC

Nr kat.: RPS-100-24

RPS-100-24 – Rievtech – switched-mode DIN-rail power supply, 24VDC/4A, 96W, input 85–264VAC. DIN rail, efficiency 87%, operation −20 to +60°C, dimensions 100×93×56mm.

Dostępny 5 i więcej szt.
46,64 €
bez VAT · 56,44 € z VAT

RPS-U120S24 – Rievtech – high-power switched-mode DIN-rail power supply, 24VDC/5A, 120W, 90–264VAC

Nr kat.: RPS-U120S24

RPS-U120S24 – Rievtech – high-power switched-mode DIN-rail power supply, 24VDC/5A, 120W, input 90–264VAC. DIN rail, efficiency 88%, operation −20 to +70°C, dimensions 124×119×45mm.

Na zapytanie
53,17 €
bez VAT · 64,33 € z VAT

Ceny zawierają opłatę recyklingową.

Rievtech power supplies

The category contains RPS-15-24, RPS-15-S24, RPS-45-24, RPS-60-24, RPS-60-S24, RPS-100-24 and RPS-U120S24. The complete code, including the letter S and its position, is essential for selection. The series name alone does not guarantee specific power, dimensions or the same overload behaviour.

Choosing a power supply for a small automation assembly

A switched-mode AC/DC power supply creates a regulated DC supply for compatible loads. It is not a communication accessory that would ensure PLC compatibility by itself. The connected unit must have a suitable supply input, polarity and permissible voltage range. Count the current of loads switched by relay contacts only in the branch from which they are actually supplied.

The catalogue RPS-60-24 and RPS-60-S24 are listed with the same output of 24 V DC, 2.5 A and 60 W, but different housing dimensions. Before replacing, therefore check the installation profile and cable reach. The product groups are also distinguished in the manufacturer's official RPS overview; not all its variants are automatically part of this category.

Electrical limits and operating conditions

For each power supply, distinguish the mains input from the regulated output. For example, 24 V DC describes the required load supply, not automatically the permissible supply to the power supply. Before connecting, compare the terminal diagram, rating plate and data sheet of the exact type; do not infer the meaning of the voltage only from the short item name.

The manufacturer table RPS-45 distinguishes the input inrush current, overload protection and behaviour after overvoltage. This information does not give permission for arbitrary overloading. For the chosen type, separately verify the start-up of a capacitive load, any power reduction at higher temperature and the method of recovery after a fault. The operating temperature range alone does not guarantee full power over the entire interval.

Model example of simultaneous operation

Consider a hypothetical controller with a consumption of 0.2 A, a display 0.35 A and four output loads of 0.25 A each on a common 24 V branch. With simultaneous switching, the result is 1.55 A. If a communication device with a start-up consumption of 1 A for 200 ms is added, the design must handle a total of 2.55 A during this time. The values are model values, not data of specific Rievtech products.

The rated 2.5 A of the candidate is therefore not in itself confirmation of suitability. Verify the short-term mode, temperature and voltage directly at the controller. If the documentation does not cover the start-up profile, choose a sufficiently sized solution or adjust the simultaneity in a verified way. Do not rely on random timing of switch-on.

FAQ

Is a power supply a SELV or PELV safety supply just because it has 24 V?

No. Verify the necessary protective separation and conditions of use in the documents of the exact type and in the design of the whole installation. A general short-circuit protection designation is not such a document.

Can I exchange an RPS with an identically numbered one from another brand?

The code alone without the manufacturer is not enough. Also compare the purpose, input, version and current documentation. A checklist for electrical wiring, mechanical mounting and protection is contained in the main guide Power supplies.

Pliki cookies na tej stronie

Techniczne pliki cookies są potrzebne do działania koszyka i zamówienia — są używane zawsze. Analityczne pliki cookies pokazują nam, których stron ludzie szukają i gdzie się gubią, i pomagają nam ulepszać sklep. Użyjemy ich tylko wtedy, gdy na to pozwolisz. Więcej w zasadach przetwarzania danych.