Pneumatic tubes

Pneumatic tubes for compressed air distribution – polyurethane, nylon, coiled, Teflon and FEP. Choose by outside diameter, material, working pressure and temperature and whether the tube will be moving. You will also find pliers and knives for cutting tubes here.

Subcategorías

Filtros
Encontrado 105 productos
NUESTRO CONSEJO EN STOCK

PUC6x4-15BL, TECHNOLINE, coiled polyurethane pneumatic tube, 6×4mm, working length 15m, blue

N.º cat.: PUC6x4-15BL

PUC6x4-15BL, TECHNOLINE, coiled PU tube 6×4mm, blue, working length 15m and free ends. Working pressure 10bar, temperature −20 to +60°C.

En stock 5 uds. o más
6,92 €
sin IVA · 8,38 € con IVA
NUESTRO CONSEJO EN STOCK

PUC8x5.5-10BL, TECHNOLINE, coiled polyurethane pneumatic tube, 8×5.5mm, working length 10m, blue

N.º cat.: PUC8x5,5-10BL

PUC8x5.5-10BL, TECHNOLINE, coiled PU tube 8×5.5mm, blue, working length 10m and free ends. Working pressure 10bar, temperature −20 to +60°C.

En stock 5 uds. o más
8,50 €
sin IVA · 10,28 € con IVA
NUESTRO CONSEJO EN STOCK

TC-02, TECHNOLINE, pliers for cutting pneumatic tubes

N.º cat.: TC-02

TC-02, TECHNOLINE, pneumatic tube pliers up to Ø16mm. A square cut makes it easier to seal the tube in a push-in fitting.

En stock 5 uds. o más
13,22 €
sin IVA · 15,99 € con IVA
NUESTRO CONSEJO EN STOCK

PUC10x6.5-10BL, TECHNOLINE, coiled polyurethane pneumatic tube, 10×6.5mm, working length 10m, blue

N.º cat.: PUC10x6,5-10BL

PUC10x6.5-10BL, TECHNOLINE, coiled PU tube 10×6.5mm, blue, working length 10m and free ends. Working pressure 10bar, temperature −20 to +60°C.

En stock 5 uds. o más
13,67 €
sin IVA · 16,54 € con IVA
NUESTRO CONSEJO EN STOCK

PUC8x5.5-20BL, TECHNOLINE, coiled polyurethane pneumatic tube, 8×5.5mm, working length 20m, blue

N.º cat.: PUC8x5,5-20BL

PUC8x5.5-20BL, TECHNOLINE, coiled PU tube 8×5.5mm, blue, working length 20m and free ends. Working pressure 10bar, temperature −20 to +60°C.

En stock 5 uds. o más
15,10 €
sin IVA · 18,28 € con IVA
−5 % NUESTRO CONSEJO EN STOCK

PUC 10x6.5 15M BL, TECHNOLINE, coiled polyurethane pneumatic tube, 10×6.5mm, working length 15m, blue

N.º cat.: PUC 10x6,5 15M BL

PUC 10x6.5 15M BL, TECHNOLINE, coiled PU tube 10×6.5mm, blue, working length 15m and free ends. Working pressure 10bar, temperature −20 to +60°C.

En stock 5 uds. o más
17,51 € 18,43 €
sin IVA · 21,19 € con IVA
−10 % NUESTRO CONSEJO EN STOCK

PUC12x8-10BL, TECHNOLINE, coiled polyurethane pneumatic tube, 12×8mm, working length 10m, blue

N.º cat.: PUC12x8-10BL

PUC12x8-10BL, TECHNOLINE, coiled PU tube 12×8mm, blue, working length 10m and free ends. Working pressure 10bar, temperature −20 to +60°C.

En stock 5 uds. o más
17,84 € 19,82 €
sin IVA · 21,59 € con IVA
NUESTRO CONSEJO EN STOCK

PUC12x8-15BL, TECHNOLINE, coiled polyurethane pneumatic tube, 12×8mm, working length 15m, blue

N.º cat.: PUC12x8-15BL

PUC12x8-15BL, TECHNOLINE, coiled PU tube 12×8mm, blue, working length 15m and free ends. Working pressure 10bar, temperature −20 to +60°C.

En stock 5 uds. o más
21,22 €
sin IVA · 25,67 € con IVA
NUESTRO CONSEJO EN STOCK

PUC12x8-20BL, TECHNOLINE, coiled polyurethane pneumatic tube, 12×8mm, working length 20m, blue

N.º cat.: PUC12x8-20BL

PUC12x8-20BL, TECHNOLINE, coiled PU tube 12×8mm, blue, working length 20m and free ends. Working pressure 10bar, temperature −20 to +60°C.

En stock 5 uds. o más
22,66 €
sin IVA · 27,41 € con IVA
−5 % NUESTRO CONSEJO EN STOCK

PUC10x6.5-20BL, TECHNOLINE, coiled polyurethane pneumatic tube, 10×6.5mm, working length 20m, blue

N.º cat.: PUC10x6,5-20BL

PUC10x6.5-20BL, TECHNOLINE, coiled PU tube 10×6.5mm, blue, working length 20m and free ends. Working pressure 10bar, temperature −20 to +60°C.

En stock 5 uds. o más
25,54 € 26,88 €
sin IVA · 30,90 € con IVA
−50 % NUESTRO CONSEJO

TPA4X2B, TECHNOLINE, polyamide pneumatic tube, 4×2mm, black

N.º cat.: TPA4X2B

TPA4X2B, TECHNOLINE, polyamide tube 4×2mm, black. For Ø4mm push-in fittings; material PA.

Bajo consulta
0,09 € 0,18 €
sin IVA · 0,11 € con IVA
−20 % NUESTRO CONSEJO

TPU6X4BL, TECHNOLINE, polyurethane pneumatic tube, 6×4mm, blue

N.º cat.: TPU6X4BL

TPU6X4BL, TECHNOLINE, polyurethane pneumatic tube 6×4mm, blue. Working pressure 10bar, burst pressure 30bar, −20 to +60°C.

Bajo consulta
0,54 € 0,67 €
sin IVA · 0,65 € con IVA

TU0425B-20, polyurethane tube, black, SMC

N.º cat.: TU0425B-20

TU0425B-20 – SMC polyurethane tube, diameter 4.0/2.5mm, length 20m, colour black. Intended for pneumatic compressed air distribution. Max. operating pressure 0.8 MPa, temperature –20 to +60 °C.

Bajo consulta
8,83 €
sin IVA · 10,68 € con IVA

TU0425BU-20, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 20 m, blue

N.º cat.: TU0425BU-20

TU0425BU-20, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 20 m, blue. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must…

Bajo consulta
8,83 €
sin IVA · 10,68 € con IVA

TU0425G-20, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 20 m, green

N.º cat.: TU0425G-20

TU0425G-20, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 20 m, green. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must…

Bajo consulta
8,83 €
sin IVA · 10,68 € con IVA

TU0425W-20, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 20 m, white

N.º cat.: TU0425W-20

TU0425W-20, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 20 m, white. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must…

Bajo consulta
8,83 €
sin IVA · 10,68 € con IVA

TU0425Y-20, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 20 m, yellow

N.º cat.: TU0425Y-20

TU0425Y-20, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 20 m, yellow. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must…

Bajo consulta
8,83 €
sin IVA · 10,68 € con IVA

TU0425R-20, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 20 m, red

N.º cat.: TU0425R-20

TU0425R-20, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 20 m, red. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must respect…

Bajo consulta
8,83 €
sin IVA · 10,68 € con IVA

TU0425C-20, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 20 m, clear

N.º cat.: TU0425C-20

TU0425C-20, SMC, polyurethane tube, OD 4 mm / ID 2.5 mm, roll 20 m, clear. The tube carries compressed air or another permitted medium between elements of the pneumatic system. The design must…

Bajo consulta
8,83 €
sin IVA · 10,68 € con IVA

Los precios incluyen la tasa de reciclaje.

Pneumatic tubes

Choose the tube as part of the whole route between the air source and the point of consumption. The medium, temperature, pressure, length, space and connection method are decisive. When replacing an old line, first copy the designation and measure both diameters. Neither colour nor similar appearance is a sufficient basis for an order.

The listing includes Pneuflex and SMC tubes, straight and coiled versions and cutting tools. The material branches include PU, PTFE and FEP; polyamide is also represented. Selection therefore starts with the operating specification, not the assumption that all items have the same properties.

Material according to the actual task

For a flexible line, assess Polyurethane PU tubes. Pneuflex for ester-based PU emphasises flexibility and abrasion resistance; for polyamide describes options for higher pressures and temperatures than PU. This is a characteristic of these families, not common limit values for all offered sizes.

If the specification includes a chemical medium or elevated temperature, compare Teflon tubes a Fluoropolymer FEP tubes. In the enquiry, state the specific substance, concentration, temperature and contact time. State separately whether the substance flows inside or is used for external cleaning. Only with these data can documentation of the suitability of the whole assembly be requested.

Two diameters, two selection questions

Compare the outer diameter with the requirements of the fitting, the inner diameter with the need for media flow. SMC TU/TIUB table states both dimensions separately and distinguishes metric and inch versions. In addition to the dimension, verify the prescribed material and tolerance; similar numbers in the catalogue do not by themselves prove interchangeability.

For the design, draw the route and mark every fitting, sheet-metal pass-through and change of direction. For each point, decide whether it must remain accessible for service. The drawing allows two routing variants to be compared before purchase and reveals unnecessary loops. For a moving workplace, consider separately Coiled polyurethane PU tubes according to the working reach actually needed.

Model calculation of internal volume

Let us consider, purely for tutorial purposes, two four-metre tubes with an inner diameter of 4 and 6 mm. The volume of the cylindrical space V = π × d² × L / 4 is approximately 50.3 and 113.1 ml. The second variant has 2.25 times larger internal volume. The calculation uses chosen dimensions, not the parameters of a specific product.

The result shows how much space the route itself contains. It does not determine the flow rate, pressure loss or response time. To assess them, add the actual working pressure, consumption and all local resistances. When changing the length, also recalculate the volume; do not compare a new line only by diameter.

Mounting and troubleshooting

According to the SMC mounting instructions disconnect the supply and release the residual pressure. Check for an undamaged square cut, insertion into the specified fitting and routing without tension or twisting. For preparing the ends, use Cutting pliers, knives.

In case of problems, record whether they occur permanently, during consumption, after warming up, or only in a certain position of the machine. Always check one branch at a time and record the changes made. This separates observation from assumption and avoids repeated tube replacement without finding the cause.

FAQ

Is it enough to keep the colour when replacing?

Use colour for your own clear marking. Determine the replacement by the full code, dimensions and documented conditions of use.

Can air consumption be determined from length and diameter?

The dimensions alone determine the geometric volume. Consumption also requires a description of the working cycle and pressure states; the stated model does not calculate it.

Cookies en este sitio web

Necesitamos las cookies técnicas para que funcionen el carrito y el pedido — se usan siempre. Las cookies analíticas nos muestran qué páginas buscan las personas y dónde se pierden, y nos ayudan a mejorar la tienda. Solo las usaremos si nos lo permites. Más información en la política de tratamiento de datos.