Pneumatic grippers, gripper heads

SMC pneumatic grippers and gripper heads for handling parts in automation – parallel, angular and three-jaw. Choose by gripping force, jaw stroke, part weight and finger length.

Filtros
Encontrado 8 productos

MHZL2-16D, SMC, 2 fingers, double-acting, Ø16mm, stroke 12mm

N.º cat.: MHZL2-16D

MHZL2-16D, SMC – pneumatic long-stroke parallel gripper; Number of fingers: 2; Piston diameter: 16mm; Opening/closing stroke: 12mm.

Bajo consulta
311,07 €
sin IVA · 376,40 € con IVA

MHS3-16D, SMC, 3 parallel fingers, Ø16mm, stroke 4mm, double-acting

N.º cat.: MHS3-16D

MHS3-16D, SMC – pneumatic 3-finger gripper; Number of fingers: 3; Piston diameter: 16mm; Total opening/closing stroke: 4mm (measured across the diameter).

Bajo consulta
414,41 €
sin IVA · 501,44 € con IVA

MHZL2-25D, SMC, 2 fingers, double-acting, Ø25mm, stroke 22mm

N.º cat.: MHZL2-25D

MHZL2-25D, SMC – pneumatic long-stroke parallel gripper; Number of fingers: 2; Piston diameter: 25mm; Opening/closing stroke: 22mm.

Bajo consulta
502,52 €
sin IVA · 608,05 € con IVA

MHZ2-40C, SMC, 2-finger, single-acting, normally closed, Ø40mm, stroke 30mm

N.º cat.: MHZ2-40C

MHZ2-40C, SMC – pneumatic parallel gripper; Number of fingers: 2; Piston diameter: 40mm; Actuation: single-acting.

Bajo consulta
730,40 €
sin IVA · 883,78 € con IVA

MHZ2-40D, SMC, 2-finger, double-acting, Ø40mm, stroke 30mm

N.º cat.: MHZ2-40D

MHZ2-40D, SMC – pneumatic parallel gripper; Number of fingers: 2; Piston diameter: 40mm; Actuation: double-acting.

Bajo consulta
837,83 €
sin IVA · 1 013,77 € con IVA

MHW2-40TFD, SMC, 2-finger, Ø40mm, opening 180°, double-acting

N.º cat.: MHW2-40TFD

MHW2-40TFD, SMC – pneumatic angular gripper; Number of fingers: 2; Piston size: 40mm; Actuation: double-acting.

Bajo consulta
906,61 €
sin IVA · 1 097,00 € con IVA

MHL2-40D, SMC, 2-finger wide, Ø40mm, total stroke 100mm

N.º cat.: MHL2-40D

MHL2-40D, SMC – pneumatic parallel gripper; Piston diameter: 40mm; Number of fingers: 2; Total opening/closing stroke: 100mm.

Bajo consulta
1 031,32 €
sin IVA · 1 247,90 € con IVA

MRHQ25D-180S-N, SMC, 2-finger, double-acting, Ø25mm, rotation 180°

N.º cat.: MRHQ25D-180S-N

MRHQ25D-180S-N, SMC – pneumatic rotary gripper; Number of fingers: 2 parallel; Piston diameter: 25mm; Gripping actuation: double-acting.

Bajo consulta
1 239,80 €
sin IVA · 1 500,15 € con IVA

Los precios incluyen la tasa de reciclaje.

Pneumatic grippers, gripper heads

A pneumatic gripper ensures that a component is gripped in a handling or assembly device. When selecting, it is not enough to know the part weight and the finger spacing. The shape of the contact surfaces, the acceleration of the manipulator, the orientation of the part and the consequences of losing the grip are also important. This category includes SMC products of the MHZ, MHS, MHL, MHW and MRHQ series; do not transfer the parameters of one version to the others.

What the gripping force in the catalogue means

V SMC MHZ catalogue the effective gripping force in the relevant diagrams is expressed as the force of one finger in full contact with the part. It depends on the pressure and the distance of the gripping point. The diagram for external gripping must therefore not be used for internal gripping without distinction. The order designation MHZ2 distinguishes D for the double-acting version, S for the single-acting normally open version and C for the single-acting normally closed version.

For the design, first describe how the part is to be held: by friction between surfaces, by bearing against a shaped finger, or by a combination of both principles. The required force is not the same as the permitted load of a sensitive product. With thin-walled parts, a higher grip can cause deformation before slipping is reliably resolved.

Documents for the right selection

  • State the part dimensions including manufacturing tolerances and the required clearance for approach.
  • Separate the total change in opening from the movement of one finger; check the stroke definition in the drawing.
  • Draw your own fingers including their mass, length, contact surfaces and centre of gravity.
  • Determine the load at rest, during acceleration, braking and change of orientation of the manipulator.
  • Design a part presence check and an acceptable response to a gripping error.

Acceptance conditions should include the smallest and largest part, normal pressure fluctuations and the actual surface condition. A test with a single clean sample does not confirm the function with oil, burrs or dimensional deviation. Therefore, record the result together with the specific test conditions and machine settings.

Author's model example: extending the finger

Consider a purely model transverse force of 20 N acting at a distance of 30 mm from the selected support point. The moment is M = F·l = 20 × 0.03 = 0.60 N·m. By extending the distance to 60 mm with the same force, the moment increases to 1.20 N·m. The force has not changed, but the load on the arm bearing has doubled.

The calculation is not the permitted moment of any offered gripper. It serves to explain why your own extended fingers cannot be approved based on the size of the body alone. The actual design must compare all forces and moments with the limits of the specific product and take into account dynamic movement.

Mounting and diagnostics

Before mounting, verify the alignment of the approach and that the fingers do not hit the fixture. Test repeatability with and without the product. If the problem occurs only during fast travel, record the acceleration and orientation, not just the set pressure. When replacing the fingers, repeat the acceptance test.

Supply the assembly with a suitable air preparation a pneumatic valve. For clamping a part in a fixed fixture, also compare pneumatic clamps; this is a different working task from transferring a gripped part.

FAQ

Does a sensor signal confirm that the part is securely gripped?

A position signal alone does not confirm the required force or correct contact with the product. The required checks must correspond to the specific process and its risks.

Can higher pressure compensate for an unsuitable finger shape?

Not reliably. First verify the contact geometry and the load on the product. The pressure can only be changed within the permitted range of all components and after a new test of the result.

Cookies en este sitio web

Necesitamos las cookies técnicas para que funcionen el carrito y el pedido — se usan siempre. Las cookies analíticas nos muestran qué páginas buscan las personas y dónde se pierden, y nos ayudan a mejorar la tienda. Solo las usaremos si nos lo permites. Más información en la política de tratamiento de datos.