UZDK 30P6113, BAUMER, ultrasonic sensor with two switching points, 30–250mm, PNP, normally open (NO), cable 2m, IP67

Cat. no.: UZDK 30P6113

Manufacturer: Baumer

On request

Our price excl. VAT: 464,75 €
incl. VAT 21 %: 562,35 €

Weight 0.13 kg

HS Code (Taric) 85365019

Country of origin CH

Description

UZDK 30P6113, BAUMER, ultrasonic sensor with two switching points, 30–250mm, PNP, normally open (NO), cable 2m, IP67

UZDK 30P6113 is a Baumer ultrasonic sensor with two adjustable switch points for monitoring two distance limits. Working range 30–250mm. Output PNP, normally open (NO) and connection cable 2m.

Technical parameters – overview

Manufacturer	BAUMER
Type designation	UZDK 30P6113
Special function	two-point switching
Working range Sd	30–250mm
Limit distance Sde	30–250mm
Switching output	PNP, normally open (NO)
Supply voltage	12–30VDC
Electrical connection	cable 2m
Setting options	Teach-in
Repeatability	0.5mm
Switch-on time	< 20 ms
Switch-off time	< 20 ms
Ultrasonic frequency	300kHz
Konstrukce	rectangular
Housing material	polyester / die-cast zinc
Width / diameter	30mm
Height / length	65mm
Hloubka	31mm
Degree of protection	IP67
Operating temperature	-10–+60 °C

Function and suitable use

Two switching limits are practical, for example, when monitoring the lower and upper limit of an object position or monitoring two levels within the sensor range. The exact meaning of the outputs must be set according to the specific variant.

How to choose the right variant

Range: 30–250mm; design the target position within the declared interval, not on the basis of the series designation.
Output: PNP, normally open (NO); check compatibility with the control unit input.
Mounting: rectangular version; observe the dimensions and recommended fixing.
Wiring: The cable version allows direct routing to the switchboard. During mounting, verify the cable length, strain relief and suitable cable protection.
Environment: protection IP67; verify suitability for specific contamination, temperatures or chemical influences according to the operating conditions.

Difference from a related model

Compared with the variant UZDK 30P6113/S14 this model differs in the parameter connection: zde cable 2m, for variant UZDK 30P6113/S14 connector M12. This is decisive when choosing the correct version.

Most frequent selection questions

What are two switch points for?

They allow two set distance limits to be evaluated according to the configuration of the given model.

Jde o cableovou variantu?

Yes. The connection of this model is cable 2m. When designing the cable route, take into account the length and mechanical protection of the line.

What output does this variant have?

The output circuit is PNP, normally open (NO). Before connecting, compare it with the input type of the PLC or other control unit.

Technical parameters

Objednací kód	UZDK 30P6113
Výrobce	Baumer
Housing size	None
Minimum sensing distance [mm]	30
Connection	Cable 2m
Supply voltage [V DC]	12–30
Switching function	NO
Switching output	PNP
Synchronization	No
Design	Rectangular / compact
Analog output	None
Communication interface	None
Maximum range [mm]	250
Degree of protection	IP67
Adjustment	Teach-in
Blind zone [mm]	0–30

Ask about this product

Ask us about technical parameters, compatibility with your equipment, availability or a price for larger quantities. It helps if you tell us what application you need the product for — if it does not fit, we will recommend a more suitable type.

Name and company

E-mail

Phone

Question

Copy the code from the image