UF200.P25-GP2J.72N, BAUMER, ultrasonic sensor with two switch points, 10–250mm, push-pull, connector M8, 4 pins, IO-Link, IP67

UF200.P25-GP2J.72N, BAUMER, ultrasonic sensor with two switch points, 10–250mm, push-pull, connector M8, 4 pins, IO-Link, IP67

UF200.P25-GP2J.72N is a Baumer ultrasonic sensor with two adjustable switch points for monitoring two distance limits. Working range 10–250mm. Output push-pull and connection connector M8, 4 pins.

Technical parameters – overview

Function and suitable use

Two switching limits are practical, for example, when monitoring the lower and upper limit of an object position or monitoring two levels within the sensor range. The exact meaning of the outputs must be set according to the specific variant.

• The declared setting and communication options can be used via IO-Link; when choosing, verify a compatible IO-Link master and connector wiring.

How to choose the right variant

• Range: 10–250mm; design the target position within the declared interval, not on the basis of the series designation.
• Output: push-pull; check compatibility with the control unit input.
• Mounting: rectangular version; observe the dimensions and recommended fixing.
• Wiring: The M8 connector makes sensor replacement easier; when ordering the mating part, check the number of pins and the wiring of the individual wires.
• Environment: protection IP67; verify suitability for specific contamination, temperatures or chemical influences according to the operating conditions.

Most frequent selection questions

What are two switch points for?

They allow two set distance limits to be evaluated according to the configuration of the given model.

What connection is needed?

For this model, the stated connection is connector M8, 4 pins. The mating part and pinout must be verified according to the manufacturer's version.

What output does this variant have?

The output circuit is push-pull. Before connecting, compare it with the input type of the PLC or other control unit.