K506-24DR, control system (14DI, 10DO relay, 24V DC), KINCO

K506-24DR, control system (14DI, 10DO relay, 24V DC), KINCO 

!!NOTE - FREE SOFTWARE!!

CPU processor: 16-bit industrial
Logic operation execution time: <0.5μS
Word operation time: <48μS
Integer arithmetic operation time: <65μS
Real-number arithmetic operation time: <150μS
Digital inputs: 14 DC24V
Digital outputs: 10 relay (30VDC/250VAC)
Program memory: 4000 steps
Program backup without the need for a battery
variable memory (V area): 4kB
Internal memory (M area): 1kB

Supported programming languages: Ladder Drawing (LD), Instruction List (IL)
Password protection: yes
Maximum expansion: 6 modules

Counters: 256
  - counting up, down
  - rozsah -32768~32767
  - counter retention: yes

Timers: 256
  - 1 ms 4x
  - 10 ms 16x
  - 100 ms 236x

High-speed counters (12 modes)
  - single-phase counters: 2, with a maximum frequency of 60 KHz
  - dual-phase counters: 2, with a maximum frequency of 20 KHz

Analogue potentiometers
  - 2x, 10-bit resolution, value stored in internal memory

Interrupts
  - timer interrupt: T2/T3, 0.1ms resolution
  - edge interrupt: 4, falling or rising edge
  - high-speed counter interrupt

Real-time clock: yes, with an error of less than 2 minutes per month at 25°C
Communication port: 1xRS232. 2xRS485
Port modes: Programming, Modbus-RTU (slave), Free protocol
Connection to COM Port RS232/RS485: PC (for programming), HMI, Modbus devices (readers etc.)
Supply voltage: DC24V±20%
Sensor supply: DC24V, max. 500 mA
Dimensions (L*W*H): 125x114x70mm