K606-24DR, control system (14DI, 10DO relay, 24V DC), KINCO

K606-24DR, control system KINCO, (14DI, 10DO relay, 24V DC), ethernet, KINCO

!!NOTE - FREE SOFTWARE!!

- The standard Ethernet port 10/100M, supports TCP Server, TCP Client, UDP and Modbus TCP Client/Server protocols for industrial buses; easy to use and powerful, suitable for many applications.

- The K6 platform provides higher processing speed with a scan cycle of 0.3 ms for 1000 common instructions.
- 8K instructions for program storage
- 20K bytes for data storage (V+M area) for complex control programs
- An array function is supported, allowing up to 16 arrays, each of which can contain up to 1024 elements (elements can be of any data type supported by the PLC).
- The array function can be used to find maximum, minimum, average and sorted values and can be   
  used to further extend the data storage space.
- The CAN interface supports the CANopen master function and allows up to 64 slave stations
- The CAN interface supports the Kinco motion control protocol and provides easy-to-use commands for
  position control, allowing users to easily connect Kinco servo drives and stepper drives via the
  CAN bus.
- 4 high-speed pulse counters supporting various counting modes
- the maximum counting frequency of HSC0 and HSC1 is 200 kHz
- the maximum counting frequency of HSC2 and HSC3 is 6 kHz for single-phase and 2 kHz for two-phase counting
- PLCs of the K6 series are fully compatible with the K5 series: the IO channels and power supply wiring are identical, programs of the K5 series can be run directly and expansion modules of the K5 series can be connected directly.


Supported programming languages: Ladder Drawing (LD), Instruction List (IL)
Password protection: yes

Counters: 256
  - counting up, down
  - rozsah -32768~32767
  - counter retention: yes

Timers: 256
  - 1 ms 4x
  - 10 ms 16x
  - 100 ms 236x

High-speed inputs
Single-phase: 2* max. 200KHz, 2* max. 6KHz
Two-phase: 2* max. 200KHz, 2* max. 2KHz


Analogue potentiometers
  - 2x, 10-bit resolution, value stored in internal memory

Interrupts
  - timer interrupt: T2/T3, 1ms resolution
  - edge interrupt: 4, falling or rising edge
  - high-speed counter interrupt

Real-time clock: yes, with an error of less than 2 minutes per month at 25°C
Number of connectable modules: 6
Communication port: 2x RS485
Port modes: Programming, Modbus-RTU (slave), Free protocol
Ethernet
Supply voltage: DC24V±20%
Sensor supply: DC24V, max. 500 mA
Dimensions (L*W*H): 128x114x76mm