Regulators

Compressed air pressure regulators for setting and maintaining the working pressure. Choose by port, pressure range and flow.

Filtry
Znaleziono 29 produktów
DOSTĘPNY

TEAR2000-02, regulator with pressure gauge, TECHNOLINE

Nr kat.: TEAR2000-02

TEAR2000-02, regulator with pressure gauge, flow rate 800Nl/min, working pressure 0-1MPa, connection G1/4 inch, TECHNOLINE

Dostępny 5 i więcej szt.
18,54 €
bez VAT · 22,44 € z VAT

G27-10-R1, SMC, pressure gauge

Nr kat.: G27-10-R1

G27-10-R1, SMC, pressure gauge. The pressure gauge allows local reading of the pressure in the pneumatic system.

Na zapytanie
10,79 €
bez VAT · 13,05 € z VAT

G36-10-01-L, pressure gauge, SMC

Nr kat.: G36-10-01-L

G36-10-01-L, pressure gauge, SMC

Na zapytanie
11,28 €
bez VAT · 13,65 € z VAT

G36-10-01, SMC, pressure gauge

Nr kat.: G36-10-01

G36-10-01, SMC, pressure gauge. The pressure gauge allows local reading of the pressure in the pneumatic system.

Na zapytanie
11,48 €
bez VAT · 13,90 € z VAT

G46-2-01-L, SMC, pressure gauge

Nr kat.: G46-2-01-L

G46-2-01-L, SMC, pressure gauge. The pressure gauge allows local reading of the pressure in the pneumatic system.

Na zapytanie
12,51 €
bez VAT · 15,14 € z VAT

G46-4-01-L, SMC, pressure gauge

Nr kat.: G46-4-01-L

G46-4-01-L SMC – pressure gauge. The exact variant is determined by the manufacturer's order code.

Na zapytanie
12,71 €
bez VAT · 15,38 € z VAT

G36-2-01-L, SMC, pressure gauge

Nr kat.: G36-2-01-L

G36-2-01-L SMC – pressure gauge. The exact variant is determined by the manufacturer's order code.

Na zapytanie
13,53 €
bez VAT · 16,38 € z VAT

G46-4-02-L, SMC, pressure gauge

Nr kat.: G46-4-02-L

G46-4-02-L SMC – pressure gauge. The exact variant is determined by the manufacturer's order code.

Na zapytanie
13,95 €
bez VAT · 16,87 € z VAT

G46-10-01-L, SMC, pressure gauge

Nr kat.: G46-10-01-L

G46-10-01-L, SMC, pressure gauge. The pressure gauge allows local reading of the pressure in the pneumatic system.

Na zapytanie
14,11 €
bez VAT · 17,07 € z VAT

G46-10-N01-L, pressure gauge, SMC

Nr kat.: G46-10-N01-L

G46-10-N01-L, pressure gauge, SMC

Na zapytanie
15,59 €
bez VAT · 18,86 € z VAT

G46-4-02-LN, SMC, pressure gauge

Nr kat.: G46-4-02-LN

G46-4-02-LN, SMC, pressure gauge. The pressure gauge allows local reading of the pressure in the pneumatic system.

Na zapytanie
16,00 €
bez VAT · 19,35 € z VAT

G36-2-01-LN, SMC, pressure gauge

Nr kat.: G36-2-01-LN

G36-2-01-LN, SMC, pressure gauge. The pressure gauge allows local reading of the pressure in the pneumatic system.

Na zapytanie
16,32 €
bez VAT · 19,75 € z VAT

G46-10-02-LN, SMC, pressure gauge

Nr kat.: G46-10-02-LN

G46-10-02-LN, SMC, pressure gauge. The pressure gauge allows local reading of the pressure in the pneumatic system.

Na zapytanie
16,82 €
bez VAT · 20,35 € z VAT

AR20-F01H-A, SMC, pressure regulator, modular version

Nr kat.: AR20-F01H-A

AR20-F01H-A, SMC, pressure regulator, modular version. The air preparation element filters, regulates or otherwise prepares the compressed air for the pneumatic system.

Na zapytanie
21,94 €
bez VAT · 26,55 € z VAT

ARX20-F01P, pressure regulator, SMC

Nr kat.: ARX20-F01P

pressure regulator; operating pressure: 2 MPa; SMC

Na zapytanie
22,15 €
bez VAT · 26,80 € z VAT

AR25-F02H-A, SMC, pressure regulator, modular version

Nr kat.: AR25-F02H-A

AR25-F02H-A, SMC, pressure regulator, modular version. The air preparation element filters, regulates or otherwise prepares the compressed air for the pneumatic system.

Na zapytanie
26,66 €
bez VAT · 32,25 € z VAT

AW30-F03H-A, SMC, filter / pressure regulator

Nr kat.: AW30-F03H-A

AW30-F03H-A, SMC, filter / pressure regulator. The air preparation element filters, regulates or otherwise prepares the compressed air for the pneumatic system.

Na zapytanie
41,42 €
bez VAT · 50,12 € z VAT

AC20A-F02-A, SMC, modular compressed air preparation unit

Nr kat.: AC20A-F02-A

AC20A-F02-A, SMC, modular compressed air preparation unit. The air preparation element filters, regulates or otherwise prepares the compressed air for the pneumatic system.

Na zapytanie
54,54 €
bez VAT · 66,00 € z VAT

ARP30K-03BE, SMC, precision pressure regulator

Nr kat.: ARP30K-03BE

ARP30K-03BE, SMC, precision pressure regulator. The air preparation element filters, regulates or otherwise prepares the compressed air for the pneumatic system.

Na zapytanie
86,94 €
bez VAT · 105,20 € z VAT

IR2020-F02G, SMC, pressure regulator

Nr kat.: IR2020-F02G

IR2020-F02G, SMC, pressure regulator. The air preparation element filters, regulates or otherwise prepares the compressed air for the pneumatic system.

Na zapytanie
116,48 €
bez VAT · 140,94 € z VAT

AR20-F02GH-D, pressure regulator, SMC

Nr kat.: AR20-F02GH-D

pressure regulator; operating pressure: 1.0MPa; SMC

Na zapytanie
367,44 €
bez VAT · 444,60 € z VAT

ITV2150-31F3N, SMC, pneumatic regulator

Nr kat.: ITV2150-31F3N

ITV2150-31F3N, SMC, pneumatic regulator. The regulator maintains or sets the required pressure or vacuum value.

Na zapytanie
491,31 €
bez VAT · 594,49 € z VAT

Ceny zawierają opłatę recyklingową.

Compressed air pressure regulators

An air regulator maintains the set outlet pressure under the relevant operating conditions. The static reading on the pressure gauge and the pressure under consumption are not the same situation. For selection, compare the flow characteristic, inlet pressure and setting range.

Selection data Regulators

Step What to document
Identification setting range and ports
Operating requirements peak flow and inlet pressure
Acceptance pressure under actual consumption

Choose a regulator based on the required pressure at the consumer, not just on the diameter of the connection thread. Prepare operating specifications for rest, the normal working cycle and simultaneous consumption. For each state, we recommend recording the pressure upstream and downstream of the regulator. Such a record will help decide whether you are looking for a different setting range, a more suitable size or the cause of the problem outside the regulator.

Setting range and actual function

SMC AR-D is an air pressure regulator. Its standard table distinguishes the maximum operating pressure of 1.0 MPa from the setting range of 0.05 to 0.85 MPa. The proof pressure is not a permitted working setting. The offered AR20-F02GH-D assess according to the generation D documentation. Do not transfer the values to TEAR or to another AR generation.

The listing includes TEAR1000-M5, TEAR2000-02, TEAR3000-03, AR20-F01H-A and AR25-F02H-A; they are complemented by other regulating versions and pressure gauges. For a part with filtration, see the category Filter regulator. Before ordering, we recommend distinguishing the complete device, the combined unit and the separate gauge according to the full code.

Setting, mounting and measurement

The AR-D manual prescribes operating the knob by hand, reaching the target setting by increasing the pressure and then locking the knob. Before connecting, contaminants are removed from the piping and the interior is protected from sealing material. The tightening torque is chosen according to the specific connection. For service, first isolate the supply and verify depressurisation; normal adjustment is not a dismantling procedure.

For the G36-L and G46-L pressure gauges, the manufacturer relates the accuracy to the full measuring range, not to the value currently read. Coloured zones make it easier to navigate within the required band. For example, G36-10-01-L therefore also choose according to range and connection. Do not consider a change in scale colour to be a change in regulation properties.

Model calculation of the pressure balance

The following is our own measurement model, not a parameter of a specific regulator. At rest, let us assume 0.50 MPa at the outlet. At a specified consumption of 240 l/min with the same reference conditions, we measure 0.46 MPa downstream of the regulator and 0.42 MPa at the consumer. The difference between rest and the loaded outlet is 0.50 − 0.46 = 0.04 MPa. The simultaneous loss of the downstream branch is 0.46 − 0.42 = 0.04 MPa. The total difference from the rest value is 0.08 MPa.

The culprit cannot be determined from these three numbers. For the next step of the model, let us add a simultaneous measurement at the inlet: if the supply pressure also changes, we are already comparing two influences. We recommend evaluating the results with the same consumption repeated and recording the knob position. Simply increasing the rest setting would make it impossible to compare the original conditions.

For another example of our own, consider a gauge with a range up to 1 MPa and a permissible error of 2 % of the full scale. The absolute error limit is 0.02 MPa. Such a gauge cannot reliably distinguish a change of just one hundredth of an MPa. This is a hypothetical gauge, not a specification of the offered G pressure gauge.

How to compile a useful fault record

Divide the observations into a permanent fault and a fault linked to a certain phase of the machine. Note the time, active consumers and the reading point. The proposed procedure allows the supply, regulator and downstream branch to be compared separately. During the test, always change one condition; otherwise it may not be clear which adjustment affected the result.

FAQ

Does a regulator replace a relief valve?

SMC explicitly does not allow this for AR-A. Protection of the equipment against impermissible pressure must be based on the design of the whole circuit.

What data do I need to compare flow rates?

Request the characteristic for the intended inlet pressure, outlet setting and the reference flow conditions used. A number alone without an operating point is not enough for selection.

Primary sources: SMC AR-D, SMC AR-A, SMC G pressure gauges.

Pliki cookies na tej stronie

Techniczne pliki cookies są potrzebne do działania koszyka i zamówienia — są używane zawsze. Analityczne pliki cookies pokazują nam, których stron ludzie szukają i gdzie się gubią, i pomagają nam ulepszać sklep. Użyjemy ich tylko wtedy, gdy na to pozwolisz. Więcej w zasadach przetwarzania danych.