Push-in fittings

Push-in fittings for quick, tight connection of pneumatic tubes without tools – straight, elbow, branch and barb. Choose by tube outside diameter and shape.

Podkategorie

Filtry
Znaleziono 196 produktów

KQ2T08-10A, SMC, T-connector, reducer Ø8mm↔Ø10mm

Nr kat.: KQ2T08-10A

KQ2T08-10A, SMC, T-connector, reducer Ø8mm↔Ø10mm. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance.

Na zapytanie
5,33 €
bez VAT · 6,45 € z VAT

KQ2S12-02NS, SMC, straight fitting with internal hexagon, tube Ø12mm, male R1/4

Nr kat.: KQ2S12-02NS

KQ2S12-02NS, SMC, straight fitting with internal hexagon, tube Ø12mm, male R1/4. Straight connection of the tube to threaded port R1/4; the thread seal must be verified.

Na zapytanie
5,33 €
bez VAT · 6,45 € z VAT

KQ2E06-03A, SMC, bulkhead fitting, tube Ø6mm, female Rc3/8

Nr kat.: KQ2E06-03A

KQ2E06-03A, SMC, bulkhead fitting, tube Ø6mm, female Rc3/8. Fixed pass-through of a pneumatic line through a mounting plate or cabinet wall.

Na zapytanie
5,33 €
bez VAT · 6,45 € z VAT

KQ2L10-01AS, SMC, elbow fitting 90°, tube Ø10mm, male R1/8

Nr kat.: KQ2L10-01AS

KQ2L10-01AS, SMC, elbow fitting 90°, tube Ø10mm, male R1/8. Elbow connection of the tube to threaded port R1/8; changes the line direction at the component. With pre-applied thread seal.

Na zapytanie
5,33 €
bez VAT · 6,45 € z VAT

KQ2L10-02AS, SMC, elbow fitting 90°, tube Ø10mm, male R1/4

Nr kat.: KQ2L10-02AS

KQ2L10-02AS, SMC, elbow fitting 90°, tube Ø10mm, male R1/4. Elbow connection of the tube to threaded port R1/4; changes the line direction at the component. With pre-applied thread seal.

Na zapytanie
5,41 €
bez VAT · 6,55 € z VAT

KQ2T04-M5A, SMC, T-connector, tube Ø4mm, male M5

Nr kat.: KQ2T04-M5A

KQ2T04-M5A, SMC, T-connector, tube Ø4mm, male M5. Air branching from threaded port M5 into several tube outlets.

Na zapytanie
5,45 €
bez VAT · 6,60 € z VAT
NASZA PORADA

KQ2H06-08A, SMC, straight fitting, reducer Ø6mm↔Ø8mm

Nr kat.: KQ2H06-08A

KQ2H06-08A, SMC, straight fitting, reducer Ø6mm↔Ø8mm. Straight connection of two tubes; suitable for extending a pneumatic route without a thread.

Na zapytanie
5,46 €
bez VAT · 6,60 € z VAT

KQ2L10-03AS, SMC, elbow fitting 90°, tube Ø10mm, male R3/8

Nr kat.: KQ2L10-03AS

KQ2L10-03AS, SMC, elbow fitting 90°, tube Ø10mm, male R3/8. Elbow connection of the tube to threaded port R3/8; changes the line direction at the component. With pre-applied thread seal.

Na zapytanie
5,50 €
bez VAT · 6,65 € z VAT

KQ2T04-06A, SMC, T-connector, reducer Ø4mm↔Ø6mm

Nr kat.: KQ2T04-06A

KQ2T04-06A, SMC, T-connector, reducer Ø4mm↔Ø6mm. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance.

Na zapytanie
5,54 €
bez VAT · 6,70 € z VAT

KQ2E06-00A, SMC, bulkhead fitting, tube Ø6mm on both sides

Nr kat.: KQ2E06-00A

KQ2E06-00A, SMC, bulkhead fitting, tube Ø6mm on both sides. Fixed pass-through of a pneumatic line through a mounting plate or cabinet wall.

Na zapytanie
5,54 €
bez VAT · 6,70 € z VAT

KQ2TW08-00A, SMC, cross fitting, 4× tube Ø8mm

Nr kat.: KQ2TW08-00A

KQ2TW08-00A, SMC, cross fitting, 4× tube Ø8mm. Cross connection of four pneumatic branches at a single point.

Na zapytanie
5,54 €
bez VAT · 6,70 € z VAT
NASZA PORADA

TBPE12, TECHNOLINE, all-metal T-connector for Ø12mm tube

Nr kat.: TBPE12

TBPE12, TECHNOLINE, all-metal T-connector for Ø12mm tube. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance. Metal body.

Na zapytanie
5,68 €
bez VAT · 6,88 € z VAT

KQ2T10-00A, SMC, T-connector, 3× tube Ø10mm

Nr kat.: KQ2T10-00A

KQ2T10-00A, SMC, T-connector, 3× tube Ø10mm. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance.

Na zapytanie
5,74 €
bez VAT · 6,95 € z VAT

KQ2L10-04AS, SMC, elbow fitting 90°, tube Ø10mm, male R1/2

Nr kat.: KQ2L10-04AS

KQ2L10-04AS, SMC, elbow fitting 90°, tube Ø10mm, male R1/2. Elbow connection of the tube to threaded port R1/2; changes the line direction at the component. With pre-applied thread seal.

Na zapytanie
5,95 €
bez VAT · 7,19 € z VAT

KQ2E08-02A, SMC, bulkhead fitting, tube Ø8mm, female Rc1/4

Nr kat.: KQ2E08-02A

KQ2E08-02A, SMC, bulkhead fitting, tube Ø8mm, female Rc1/4. Fixed pass-through of a pneumatic line through a mounting plate or cabinet wall.

Na zapytanie
5,95 €
bez VAT · 7,19 € z VAT

KQ2E08-00A, SMC, bulkhead fitting, tube Ø8mm on both sides

Nr kat.: KQ2E08-00A

KQ2E08-00A, SMC, bulkhead fitting, tube Ø8mm on both sides. Fixed pass-through of a pneumatic line through a mounting plate or cabinet wall.

Na zapytanie
6,36 €
bez VAT · 7,69 € z VAT

KQ2D04-00A, SMC, three-way delta manifold, 3× tube Ø4mm

Nr kat.: KQ2D04-00A

KQ2D04-00A, SMC, three-way delta manifold, 3× tube Ø4mm. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance.

Na zapytanie
6,36 €
bez VAT · 7,69 € z VAT
NASZA PORADA

KQ2L12-02AS, SMC, elbow fitting 90°, tube Ø12mm, male R1/4

Nr kat.: KQ2L12-02AS

KQ2L12-02AS, SMC, elbow fitting 90°, tube Ø12mm, male R1/4. Elbow connection of the tube to threaded port R1/4; changes the line direction at the component. With pre-applied thread seal.

Na zapytanie
6,60 €
bez VAT · 7,99 € z VAT
NASZA PORADA

KQ2H10-12A, SMC, straight fitting, reducer Ø10mm↔Ø12mm

Nr kat.: KQ2H10-12A

KQ2H10-12A, SMC, straight fitting, reducer Ø10mm↔Ø12mm. Straight connection of two tubes; suitable for extending a pneumatic route without a thread.

Na zapytanie
6,63 €
bez VAT · 8,02 € z VAT
NASZA PORADA

KQ2L12-03AS, SMC, elbow fitting 90°, tube Ø12mm, male R3/8

Nr kat.: KQ2L12-03AS

KQ2L12-03AS, SMC, elbow fitting 90°, tube Ø12mm, male R3/8. Elbow connection of the tube to threaded port R3/8; changes the line direction at the component. With pre-applied thread seal.

Na zapytanie
6,68 €
bez VAT · 8,09 € z VAT

KQ2L12-00A, SMC, elbow fitting 90°, 2× tube Ø12mm

Nr kat.: KQ2L12-00A

KQ2L12-00A, SMC, elbow fitting 90°, 2× tube Ø12mm. Change of line direction by 90° without a sharp tube bend right at the joint.

Na zapytanie
6,97 €
bez VAT · 8,44 € z VAT
NASZA PORADA

KQ2L12-04AS, SMC, elbow fitting 90°, tube Ø12mm, male R1/2

Nr kat.: KQ2L12-04AS

KQ2L12-04AS, SMC, elbow fitting 90°, tube Ø12mm, male R1/2. Elbow connection of the tube to threaded port R1/2; changes the line direction at the component. With pre-applied thread seal.

Na zapytanie
7,30 €
bez VAT · 8,83 € z VAT

KQ2LE06-00A, SMC, elbow bulkhead fitting, tube Ø6mm on both sides

Nr kat.: KQ2LE06-00A

KQ2LE06-00A, SMC, elbow bulkhead fitting, tube Ø6mm on both sides. Fixed pass-through of a pneumatic line through a mounting plate or cabinet wall.

Na zapytanie
7,46 €
bez VAT · 9,03 € z VAT
NASZA PORADA

KQ2L12-02N, SMC, elbow fitting 90°, tube Ø12mm, male R1/4

Nr kat.: KQ2L12-02N

KQ2L12-02N, SMC, elbow fitting 90°, tube Ø12mm, male R1/4. Elbow connection of the tube to threaded port R1/4; changes the line direction at the component.

Na zapytanie
7,59 €
bez VAT · 9,18 € z VAT

KQ2T12-00A, SMC, T-connector, 3× tube Ø12mm

Nr kat.: KQ2T12-00A

KQ2T12-00A, SMC, T-connector, 3× tube Ø12mm. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance.

Na zapytanie
7,59 €
bez VAT · 9,18 € z VAT

Ceny zawierają opłatę recyklingową.

Push-in fittings

Select push-in fittings according to what they actually connect: two tubes, a tube with a threaded port, or a tube with the plug-in stem of another part. The range includes Pneuflex and SMC versions in various shapes and sizes. For ordering, therefore, first draw both opposite interfaces. The category name alone does not determine the design of each item.

Section of fitting KQ2 from SMC separates the gripping of the tube by a toothed element from its sealing. The release button engages the gripping. The sealing function and mechanical securing therefore have their own design elements.

Interface first, then shape

The selection record should include the tube outer diameter, the full designation of the counterpart and the required line direction. Record the inner diameter separately for assessing the passage. For the thread, require its system and size; a value in inches without the system is not enough to decide on a replacement. Record separately whether you are selecting a thread for connecting the medium or a thread for fixing into the panel. The similar appearance of these points can hide a different purpose when ordering.

To continue in one axis, open Straight fittings, for changing direction Elbow fittings and for splitting the line Branch fittings. Our own practical rule is to select the functional diagram first and only then the smallest body. For a confined assembly, you also need to draw the access of fingers, tools and the path for pulling out the tube during replacement.

For a replacement part, prepare a simple diagram of the original and intended assembly. Both must show all ends that change during the intervention. If the replacement adds an adapter, also add the new detachable point and its accessibility. This gives you a basis for choosing between a direct replacement and a route change, without deciding solely by the size of the available component.

Mounting as a check of the whole assembly

Before intervention, ensure the safe state of the equipment and verify that no pressure remains in the section being changed. For your own mounting check, compare the actual parts with the drawing, mark the individual branches and check access to all detachable points. Also record the fixing of the line around the fitting. The purpose of the check is to reveal whether future replacement of one tube will require dismantling other components.

Pneuflex for the straight PU family describes inserting the tube and releasing it by pressing the collet. Always relate the exact mounting procedure to the selected version.

Our own model: why pressure changes the conditions of intervention

Let us consider an explicitly model closed passage with a diameter of 5 mm and an overpressure of 0.7 MPa. A force F = p × A acts on the flat closure. The area A = π × 5² / 4 is approximately 19.6 mm²; since 0.7 MPa corresponds to 0.7 N/mm², the force is about 13.7 N. This is our own illustration of the effect of pressure, not the load capacity of the fitting, the tube pull-out force or the recommended working pressure of the product. The model explains why the state of a connection cannot be assessed by hand alone.

Diagnostics by location of the symptom

In the service record, separate a problem at the tube inlet, at the threaded counterpart and in the body of the assembly. Record whether the symptom appeared after replacement, during line movement or only during simultaneous consumption. Your own comparison procedure always changes a single circumstance: line layout, verified counterpart or specific connecting part. This way, a selection error can be distinguished from a mounting problem without randomly changing the whole branch.

FAQ

Is the same diameter on the package enough?

Check which interface the value belongs to. Record the tube diameter, the plug-in stem diameter and the mounting hole size as different quantities.

Should the fitting remain accessible after the machine is completed?

Yes, take the specific service operation into account in the design. Assess the free space for inserting, releasing and pulling out the line, not just for the body dimension.

Pliki cookies na tej stronie

Techniczne pliki cookies są potrzebne do działania koszyka i zamówienia — są używane zawsze. Analityczne pliki cookies pokazują nam, których stron ludzie szukają i gdzie się gubią, i pomagają nam ulepszać sklep. Użyjemy ich tylko wtedy, gdy na to pozwolisz. Więcej w zasadach przetwarzania danych.