Push-in fittings

Push-in fittings for quick, tight connection of pneumatic tubes without tools – straight, elbow, branch and barb. Choose by tube outside diameter and shape.

Podkategorie

Filtry
Znaleziono 196 produktów
NASZA PORADA

TBPE06, TECHNOLINE, all-metal T-connector for Ø6mm tube

Nr kat.: TBPE06

TBPE06, TECHNOLINE, all-metal T-connector for Ø6mm tube. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance. Metal body.

Na zapytanie
3,07 €
bez VAT · 3,71 € z VAT
NASZA PORADA

KQ2L04-01AS, SMC, elbow fitting 90°, tube Ø4mm, male R1/8

Nr kat.: KQ2L04-01AS

KQ2L04-01AS, SMC, elbow fitting 90°, tube Ø4mm, male R1/8. Elbow connection of the tube to threaded port R1/8; changes the line direction at the component. With pre-applied thread seal.

Na zapytanie
3,08 €
bez VAT · 3,72 € z VAT
NASZA PORADA

KQ2L04-02AS, SMC, elbow fitting 90°, tube Ø4mm, male R1/4

Nr kat.: KQ2L04-02AS

KQ2L04-02AS, SMC, elbow fitting 90°, tube Ø4mm, male R1/4. Elbow connection of the tube to threaded port R1/4; changes the line direction at the component. With pre-applied thread seal.

Na zapytanie
3,08 €
bez VAT · 3,72 € z VAT
NASZA PORADA

KQ2L04-M5A, SMC, elbow fitting 90°, tube Ø4mm, male M5

Nr kat.: KQ2L04-M5A

KQ2L04-M5A, SMC, elbow fitting 90°, tube Ø4mm, male M5. Elbow connection of the tube to threaded port M5; changes the line direction at the component.

Na zapytanie
3,25 €
bez VAT · 3,93 € z VAT
NASZA PORADA

KQ2L06-M6A, SMC, elbow fitting 90°, tube Ø6mm, male M6

Nr kat.: KQ2L06-M6A

KQ2L06-M6A, SMC, elbow fitting 90°, tube Ø6mm, male M6. Elbow connection of the tube to threaded port M6; changes the line direction at the component.

Na zapytanie
3,25 €
bez VAT · 3,93 € z VAT

KQ2F06-01A, SMC, straight fitting with female thread, tube Ø6mm, female Rc1/8

Nr kat.: KQ2F06-01A

KQ2F06-01A, SMC, straight fitting with female thread, tube Ø6mm, female Rc1/8. Straight connection of the tube to threaded port Rc1/8; the thread seal must be verified.

Na zapytanie
3,28 €
bez VAT · 3,97 € z VAT
NASZA PORADA

KQ2L02-M3G, SMC, elbow fitting 90°, tube Ø2mm, male M3

Nr kat.: KQ2L02-M3G

KQ2L02-M3G, SMC, elbow fitting 90°, tube Ø2mm, male M3. Elbow connection of the tube to threaded port M3; changes the line direction at the component.

Na zapytanie
3,28 €
bez VAT · 3,97 € z VAT

KQ2L06-01A, SMC, elbow fitting 90°, tube Ø6mm, male R1/8

Nr kat.: KQ2L06-01A

KQ2L06-01A, SMC, elbow fitting 90°, tube Ø6mm, male R1/8. Elbow connection of the tube to threaded port R1/8; changes the line direction at the component.

Na zapytanie
3,36 €
bez VAT · 4,07 € z VAT

KQ2T02-00A, SMC, T-connector, 3× tube Ø2mm

Nr kat.: KQ2T02-00A

KQ2T02-00A, SMC, T-connector, 3× tube Ø2mm. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance.

Na zapytanie
3,40 €
bez VAT · 4,12 € z VAT

KQ2L06-02AS, SMC, elbow fitting 90°, tube Ø6mm, male R1/4

Nr kat.: KQ2L06-02AS

KQ2L06-02AS, SMC, elbow fitting 90°, tube Ø6mm, male R1/4. Elbow connection of the tube to threaded port R1/4; changes the line direction at the component. With pre-applied thread seal.

Na zapytanie
3,49 €
bez VAT · 4,22 € z VAT

M-3ALU-4, SMC, elbow fitting with hose barb, thread M3, tube Ø4mm

Nr kat.: M-3ALU-4

M-3ALU-4, SMC, elbow fitting with hose barb, thread M3, tube Ø4mm. A hose barb fitting for a soft tube; it is not a standard push-in collet.

Na zapytanie
3,49 €
bez VAT · 4,22 € z VAT
NASZA PORADA

KQ2L06-M5A, SMC, elbow fitting 90°, tube Ø6mm, male M5

Nr kat.: KQ2L06-M5A

KQ2L06-M5A, SMC, elbow fitting 90°, tube Ø6mm, male M5. Elbow connection of the tube to threaded port M5; changes the line direction at the component.

Na zapytanie
3,61 €
bez VAT · 4,37 € z VAT
NASZA PORADA

KQ2L06-01AS, SMC, elbow fitting 90°, tube Ø6mm, male R1/8

Nr kat.: KQ2L06-01AS

KQ2L06-01AS, SMC, elbow fitting 90°, tube Ø6mm, male R1/8. Elbow connection of the tube to threaded port R1/8; changes the line direction at the component. With pre-applied thread seal.

Na zapytanie
3,65 €
bez VAT · 4,42 € z VAT

KQ2L08-01AS, SMC, elbow fitting 90°, tube Ø8mm, male R1/8

Nr kat.: KQ2L08-01AS

KQ2L08-01AS, SMC, elbow fitting 90°, tube Ø8mm, male R1/8. Elbow connection of the tube to threaded port R1/8; changes the line direction at the component. With pre-applied thread seal.

Na zapytanie
3,65 €
bez VAT · 4,42 € z VAT

KQ2V04-M5A, SMC, universal elbow fitting, tube Ø4mm, male M5

Nr kat.: KQ2V04-M5A

KQ2V04-M5A, SMC, universal elbow fitting, tube Ø4mm, male M5. Elbow connection of the tube to threaded port M5; changes the line direction at the component.

Na zapytanie
3,69 €
bez VAT · 4,47 € z VAT

KQ2L08-02AS, SMC, elbow fitting 90°, tube Ø8mm, male R1/4

Nr kat.: KQ2L08-02AS

KQ2L08-02AS, SMC, elbow fitting 90°, tube Ø8mm, male R1/4. Elbow connection of the tube to threaded port R1/4; changes the line direction at the component. With pre-applied thread seal.

Na zapytanie
3,69 €
bez VAT · 4,47 € z VAT
NASZA PORADA

KQ2H08-00A, SMC, straight fitting, 2× tube Ø8mm

Nr kat.: KQ2H08-00A

KQ2H08-00A, SMC, straight fitting, 2× tube Ø8mm. Straight connection of two tubes; suitable for extending a pneumatic route without a thread.

Na zapytanie
3,77 €
bez VAT · 4,57 € z VAT

KQ2F06-02A, SMC, straight fitting with female thread, tube Ø6mm, female Rc1/4

Nr kat.: KQ2F06-02A

KQ2F06-02A, SMC, straight fitting with female thread, tube Ø6mm, female Rc1/4. Straight connection of the tube to threaded port Rc1/4; the thread seal must be verified.

Na zapytanie
3,81 €
bez VAT · 4,61 € z VAT

KQ2L06-03AS, SMC, elbow fitting 90°, tube Ø6mm, male R3/8

Nr kat.: KQ2L06-03AS

KQ2L06-03AS, SMC, elbow fitting 90°, tube Ø6mm, male R3/8. Elbow connection of the tube to threaded port R3/8; changes the line direction at the component. With pre-applied thread seal.

Na zapytanie
3,81 €
bez VAT · 4,61 € z VAT

KQ2L08-01A, SMC, elbow fitting 90°, tube Ø8mm, male R1/8

Nr kat.: KQ2L08-01A

KQ2L08-01A, SMC, elbow fitting 90°, tube Ø8mm, male R1/8. Elbow connection of the tube to threaded port R1/8; changes the line direction at the component.

Na zapytanie
3,85 €
bez VAT · 4,66 € z VAT

KQ2V06-M5A, SMC, universal elbow fitting, tube Ø6mm, male M5

Nr kat.: KQ2V06-M5A

KQ2V06-M5A, SMC, universal elbow fitting, tube Ø6mm, male M5. Elbow connection of the tube to threaded port M5; changes the line direction at the component.

Na zapytanie
3,90 €
bez VAT · 4,71 € z VAT

KQ2E04-00NJ, SMC, bulkhead fitting, tube Ø4mm on both sides

Nr kat.: KQ2E04-00NJ

KQ2E04-00NJ, SMC, bulkhead fitting, tube Ø4mm on both sides. Fixed pass-through of a pneumatic line through a mounting plate or cabinet wall.

Na zapytanie
3,90 €
bez VAT · 4,71 € z VAT

KQ2E23-00NJ, SMC, bulkhead fitting, tube Ø3.2mm on both sides

Nr kat.: KQ2E23-00NJ

KQ2E23-00NJ, SMC, bulkhead fitting, tube Ø3.2mm. on both sides Fixed pass-through of a pneumatic line through a mounting plate or cabinet wall.

Na zapytanie
3,90 €
bez VAT · 4,71 € z VAT

KQ2VS04-M5A, SMC, universal elbow fitting with internal hexagon, tube Ø4mm, male M5

Nr kat.: KQ2VS04-M5A

KQ2VS04-M5A, SMC, universal elbow fitting with internal hexagon, tube Ø4mm, male M5. Elbow connection of the tube to threaded port M5; changes the line direction at the component.

Na zapytanie
3,94 €
bez VAT · 4,76 € z VAT
NASZA PORADA

KQ2E06-00NJ, SMC, bulkhead fitting, tube Ø6mm on both sides

Nr kat.: KQ2E06-00NJ

KQ2E06-00NJ, SMC, bulkhead fitting, tube Ø6mm on both sides. Fixed pass-through of a pneumatic line through a mounting plate or cabinet wall.

Na zapytanie
3,94 €
bez VAT · 4,76 € z VAT

Ceny zawierają opłatę recyklingową.

Push-in fittings

Select push-in fittings according to what they actually connect: two tubes, a tube with a threaded port, or a tube with the plug-in stem of another part. The range includes Pneuflex and SMC versions in various shapes and sizes. For ordering, therefore, first draw both opposite interfaces. The category name alone does not determine the design of each item.

Section of fitting KQ2 from SMC separates the gripping of the tube by a toothed element from its sealing. The release button engages the gripping. The sealing function and mechanical securing therefore have their own design elements.

Interface first, then shape

The selection record should include the tube outer diameter, the full designation of the counterpart and the required line direction. Record the inner diameter separately for assessing the passage. For the thread, require its system and size; a value in inches without the system is not enough to decide on a replacement. Record separately whether you are selecting a thread for connecting the medium or a thread for fixing into the panel. The similar appearance of these points can hide a different purpose when ordering.

To continue in one axis, open Straight fittings, for changing direction Elbow fittings and for splitting the line Branch fittings. Our own practical rule is to select the functional diagram first and only then the smallest body. For a confined assembly, you also need to draw the access of fingers, tools and the path for pulling out the tube during replacement.

For a replacement part, prepare a simple diagram of the original and intended assembly. Both must show all ends that change during the intervention. If the replacement adds an adapter, also add the new detachable point and its accessibility. This gives you a basis for choosing between a direct replacement and a route change, without deciding solely by the size of the available component.

Mounting as a check of the whole assembly

Before intervention, ensure the safe state of the equipment and verify that no pressure remains in the section being changed. For your own mounting check, compare the actual parts with the drawing, mark the individual branches and check access to all detachable points. Also record the fixing of the line around the fitting. The purpose of the check is to reveal whether future replacement of one tube will require dismantling other components.

Pneuflex for the straight PU family describes inserting the tube and releasing it by pressing the collet. Always relate the exact mounting procedure to the selected version.

Our own model: why pressure changes the conditions of intervention

Let us consider an explicitly model closed passage with a diameter of 5 mm and an overpressure of 0.7 MPa. A force F = p × A acts on the flat closure. The area A = π × 5² / 4 is approximately 19.6 mm²; since 0.7 MPa corresponds to 0.7 N/mm², the force is about 13.7 N. This is our own illustration of the effect of pressure, not the load capacity of the fitting, the tube pull-out force or the recommended working pressure of the product. The model explains why the state of a connection cannot be assessed by hand alone.

Diagnostics by location of the symptom

In the service record, separate a problem at the tube inlet, at the threaded counterpart and in the body of the assembly. Record whether the symptom appeared after replacement, during line movement or only during simultaneous consumption. Your own comparison procedure always changes a single circumstance: line layout, verified counterpart or specific connecting part. This way, a selection error can be distinguished from a mounting problem without randomly changing the whole branch.

FAQ

Is the same diameter on the package enough?

Check which interface the value belongs to. Record the tube diameter, the plug-in stem diameter and the mounting hole size as different quantities.

Should the fitting remain accessible after the machine is completed?

Yes, take the specific service operation into account in the design. Assess the free space for inserting, releasing and pulling out the line, not just for the body dimension.

Pliki cookies na tej stronie

Techniczne pliki cookies są potrzebne do działania koszyka i zamówienia — są używane zawsze. Analityczne pliki cookies pokazują nam, których stron ludzie szukają i gdzie się gubią, i pomagają nam ulepszać sklep. Użyjemy ich tylko wtedy, gdy na to pozwolisz. Więcej w zasadach przetwarzania danych.