Amplifiers and evaluation units

Amplifiers and evaluation units process the signal of a compatible ultrasonic sensing head. IPF UV540000 offers analogue outputs 0–10 V and 4–20 mA for the downstream control system.

Filtri
Trovati 1 prodotti

Ultrasonic sensor, analogue amplifier, /1.5m, UV540000

Cod. cat.: UV540000

Ultrasonic sensor, analogue amplifier, /1.5m, 19-30V DC,4-20mA/0-10V(digital outputs)

Su richiesta
1 034,65 €
IVA esclusa · 1 251,93 € IVA inclusa

I prezzi includono il contributo di riciclaggio.

Separate electronics for ultrasonic measurement

The evaluation unit supplies and processes the signals of the corresponding ultrasonic head and passes the result to the control system. The separate arrangement allows the sensing part to be placed at the measuring point and the electronics in a suitable mounting space. Compatibility of the head and amplifier is a basic parameter of the entire assembly.

Example of a separate IPF ultrasonic sensing head and evaluation electronics
Illustrative photo of an IPF assembly with sensing head and electronics. Verify the scope of delivery of UV540000 in the product details.

IPF UV540000 evaluation unit

The range includes IPF UV540000 – amplifier for ultrasonic sensors. According to the system documentation, analogue signals are available: 0–10 V and 4–20 mA and switching outputs. For correct wiring, compare the supply, terminal designation, required evaluation and electrical parameters of the connected device.

How to verify a compatible sensing head

  • Complete designation: determine the type of amplifier and connected head from the rating plate.
  • Measuring task: state the required distance, target material and environment.
  • Wiring: verify the wiring, permitted cable length and shielding requirements.
  • Output: choose a voltage or current signal according to the input of the PLC or meter and its load.
  • Adjustment: compare the range setting, switch points and any synchronisation.

Does the amplifier itself determine the measuring range?

The working range is assessed for a compatible assembly of head and evaluation unit. When replacing, therefore, compare both parts and the installation conditions.

Technical document: IPF system documentation with UV540000.

Selection questions

Can any ultrasonic head be connected to UV540000?

Use a head explicitly compatible with the IPF system and verify the wiring and permitted cable length. When replacing, prepare the complete designation of the head and the amplifier.

What to verify before ordering an evaluation unit?

Check the scope of delivery, compatible head, supply and required signal to the PLC. Assess the assembly as a whole, including cabling, range setting and analogue output load.

Selection and technical consultation

For selection or replacement, send the complete order code and a description of the application. TECHNOLINE technical support will help compare the required version.

Related: All special ultrasonic sensors · Sensor Cables and Connectors.

Cookie su questo sito

I cookie tecnici servono per il funzionamento del carrello e dell'ordine — sono sempre utilizzati. I cookie analitici ci mostrano quali pagine le persone cercano e dove si perdono, e ci aiutano a migliorare il negozio. Li utilizziamo solo se ce lo consenti. Maggiori informazioni nella informativa sul trattamento dei dati.