Pneumatic accessories

SMC, Pneuflex and other pneumatic accessories – push-in fittings, threaded fittings, reducers, flow control valves, silencers, plugs, blow guns and suction cups. Choose by tube diameter and connection thread.

Sottocategorie

Filtri
Trovati 696 prodotti

KQ2T04-00A, SMC, T-connector, 3× tube Ø4mm

Cod. cat.: KQ2T04-00A

KQ2T04-00A, SMC, T-connector, 3× tube Ø4mm. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance.

Su richiesta
4,70 €
IVA esclusa · 5,69 € IVA inclusa

ZP25CS, SMC, vacuum suction cup, Ø25mm, flat version with rib, silicone

Cod. cat.: ZP25CS

ZP25CS, SMC: vacuum suction cup. Ø25mm, flat version with rib, silicone. Selection by profile, mounting and vacuum.

Su richiesta
4,70 €
IVA esclusa · 5,69 € IVA inclusa
IL NOSTRO CONSIGLIO

TBPE10, TECHNOLINE, all-metal T-connector for Ø10mm tube

Cod. cat.: TBPE10

TBPE10, TECHNOLINE, all-metal T-connector for Ø10mm tube. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance. Metal body.

Su richiesta
4,77 €
IVA esclusa · 5,77 € IVA inclusa

KQ2T06-00A, SMC, T-connector, 3× tube Ø6mm

Cod. cat.: KQ2T06-00A

KQ2T06-00A, SMC, T-connector, 3× tube Ø6mm. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance.

Su richiesta
4,78 €
IVA esclusa · 5,79 € IVA inclusa

KQ2E04-00A, SMC, bulkhead fitting, tube Ø4mm on both sides

Cod. cat.: KQ2E04-00A

KQ2E04-00A, SMC, bulkhead fitting, tube Ø4mm on both sides. Fixed pass-through of a pneumatic line through a mounting plate or cabinet wall.

Su richiesta
4,86 €
IVA esclusa · 5,88 € IVA inclusa
IL NOSTRO CONSIGLIO

KQ2H08-10A, SMC, straight fitting, reducer Ø8mm↔Ø10mm

Cod. cat.: KQ2H08-10A

KQ2H08-10A, SMC, straight fitting, reducer Ø8mm↔Ø10mm. Straight connection of two tubes; suitable for extending a pneumatic route without a thread.

Su richiesta
4,86 €
IVA esclusa · 5,88 € IVA inclusa

KQ2T06-08A, SMC, T-connector, reducer Ø6mm↔Ø8mm

Cod. cat.: KQ2T06-08A

KQ2T06-08A, SMC, T-connector, reducer Ø6mm↔Ø8mm. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance.

Su richiesta
4,90 €
IVA esclusa · 5,93 € IVA inclusa

KQ2T08-00A, SMC, T-connector, 3× tube Ø8mm

Cod. cat.: KQ2T08-00A

KQ2T08-00A, SMC, T-connector, 3× tube Ø8mm. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance.

Su richiesta
4,90 €
IVA esclusa · 5,93 € IVA inclusa
IL NOSTRO CONSIGLIO

KQ2H12-02AS, SMC, straight push-in fitting with male thread, tube Ø12mm, thread R1/4

Cod. cat.: KQ2H12-02AS

KQ2H12-02AS, SMC: straight push-in fitting with male thread; tube Ø12mm, thread R1/4. Dimensions and use according to the catalogue series.

Su richiesta
4,90 €
IVA esclusa · 5,93 € IVA inclusa
IL NOSTRO CONSIGLIO

KQ2H12-03AS, SMC, straight push-in fitting with male thread, tube Ø12mm, thread R3/8

Cod. cat.: KQ2H12-03AS

KQ2H12-03AS, SMC: straight push-in fitting with male thread; tube Ø12mm, thread R3/8. Dimensions and use according to the catalogue series.

Su richiesta
4,90 €
IVA esclusa · 5,93 € IVA inclusa

KQ2T08-06A, SMC, T-connector, reducer Ø8mm↔Ø6mm

Cod. cat.: KQ2T08-06A

KQ2T08-06A, SMC, T-connector, reducer Ø8mm↔Ø6mm. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance.

Su richiesta
4,90 €
IVA esclusa · 5,93 € IVA inclusa

M-5ALU-4, SMC, elbow fitting with hose barb, thread M5, tube Ø4mm

Cod. cat.: M-5ALU-4

M-5ALU-4, SMC, elbow fitting with hose barb, thread M5, tube Ø4mm. A hose barb fitting for a soft tube; it is not a standard push-in collet.

Su richiesta
4,90 €
IVA esclusa · 5,93 € IVA inclusa
IL NOSTRO CONSIGLIO

TBPB06-G04, TECHNOLINE, all-metal push-in T-fitting, thread in the bottom branch, tube Ø6mm, male thread G1/2

Cod. cat.: TBPB06-G04

TBPB06-G04, TECHNOLINE: push-in T-fitting, thread in the bottom branch; tube Ø6mm, male thread G1/2. Push-in connection for pneumatics.

Su richiesta
5,03 €
IVA esclusa · 6,08 € IVA inclusa
IL NOSTRO CONSIGLIO

AN10-01, SMC, pneumatic exhaust silencer, thread R1/8, body size 10

Cod. cat.: AN10-01

AN10-01, SMC: pneumatic exhaust silencer. thread R1/8, body size 10. Use in pneumatic distribution and verified mounting criteria.

Su richiesta
5,05 €
IVA esclusa · 6,11 € IVA inclusa

TBPM08, TECHNOLINE, all-metal bulkhead push-in fitting, 2× tube outer Ø8mm, panel mounting

Cod. cat.: TBPM08

TBPM08, TECHNOLINE: all-metal bulkhead push-in fitting. 2× tube outer Ø8mm, panel mounting. Use in pneumatic distribution and verified mounting criteria.

Su richiesta
5,10 €
IVA esclusa · 6,17 € IVA inclusa

KQ2T06-01AS, SMC, T-connector, tube Ø6mm, male R1/8

Cod. cat.: KQ2T06-01AS

KQ2T06-01AS, SMC, T-connector, tube Ø6mm, male R1/8. Air branching from threaded port R1/8 into several tube outlets. With pre-applied thread seal.

Su richiesta
5,11 €
IVA esclusa · 6,18 € IVA inclusa
IL NOSTRO CONSIGLIO

KQ2H12-00A, SMC, straight fitting, 2× tube Ø12mm

Cod. cat.: KQ2H12-00A

KQ2H12-00A, SMC, straight fitting, 2× tube Ø12mm. Straight connection of two tubes; suitable for extending a pneumatic route without a thread.

Su richiesta
5,11 €
IVA esclusa · 6,18 € IVA inclusa

ZP32CS, SMC, vacuum suction cup, Ø32mm, flat version with rib, silicone

Cod. cat.: ZP32CS

ZP32CS, SMC: vacuum suction cup. Ø32mm, flat version with rib, silicone. Selection by profile, mounting and vacuum.

Su richiesta
5,11 €
IVA esclusa · 6,18 € IVA inclusa
IL NOSTRO CONSIGLIO

TBPB06-G02, TECHNOLINE, all-metal push-in T-fitting, thread in the bottom branch, tube Ø6mm, male thread G1/4

Cod. cat.: TBPB06-G02

TBPB06-G02, TECHNOLINE: push-in T-fitting, thread in the bottom branch; tube Ø6mm, male thread G1/4. Push-in connection for pneumatics.

Su richiesta
5,12 €
IVA esclusa · 6,20 € IVA inclusa

I prezzi includono il contributo di riciclaggio.

Pneumatic accessories

Pneumatic accessories connect individual parts of the air circuit and help adapt its arrangement to a specific machine. When selecting, you need to know not only the part designation, but also both connected counterparts, the required function and operating conditions. A similar appearance of fittings or the same brand do not by themselves confirm interchangeability. This category is a signpost for line design, air distribution, flow adjustment and vacuum gripping.

Select the branch according to the task in the circuit

  • Threaded fitting: connection to a specific threaded port of the equipment.
  • Push-in fittings: selecting a connection for the corresponding pipe or tube.
  • Bulkhead fittings: passing the line through a panel with resolved fixing.
  • Reducing fittings: connecting different connection sizes.
  • Flow control valves: flow adjustment taking into account the direction and function of the valve.
  • Silencers: exhaust accessories, which are also selected according to flow requirements.
  • Blanking plugs: closing the connection with a corresponding version.
  • Blow gun: manual work with air according to the rules of the given workplace.
  • Pneumatic suction cups: contact of the vacuum gripper with the surface of the handled part.

Three checks before ordering

Mechanical interface: record the full connection designation on both sides. For the tube, distinguish the outer and inner diameter; for the thread, its type, size and sealing method. Also check the space for mounting and service; the correct part may not be suitable for an installation that is too tight.

Function: draw where the medium should flow from and to. Connecting, branching, blanking, throttling and gripping are different tasks. For more complex accessories, compare the diagram and the full order code, not just the first part of the name.

Operating conditions: verify the permissible medium, pressure, temperature and environment for the specific version in the manufacturer's documentation. Assess use in vacuum separately. Do not derive the permitted range of the whole assembly from a parameter of one of its elements.

Model list of connection points

Let us consider four workstations, each with two separate lines. If each line forms one uninterrupted section, eight sections have a total of sixteen ends to connect. Dividing all eight sections into two parts adds eight intermediate fittings and sixteen more tube ends. This is our own inventory example, not a calculation of pressure loss or probability of leakage. It helps reveal missing counterparts and distinguish a spare piece from a part actually needed in the assembly.

Mounting and troubleshooting

Before intervention, shut down the equipment according to its instructions and secure it against unexpected movement. Disconnect lines only after safely removing pressure; for vacuum gripping, first secure the transported object. Take the mounting procedure, tightening and insertion check from the instructions of the specific accessory. After assembly, verify tightness, actual function and maintenance access during controlled commissioning.

In case of a leak, first determine its location, then check the counterpart, line size, seal condition and mechanical stress on the joint. In case of slow movement, monitor the whole supply and exhaust. Random replacement of one part without verifying the cause can leave the original problem in another part of the circuit.

FAQ

Can I replace a fitting based on a photo?

A photo helps determine the shape. For ordering, however, add dimensions, exact connection, function and operating limitations. For a replacement, record the original code and also compare the counterpart.

How to prepare documentation for selecting accessories?

Attach a simple circuit diagram, a list of connections, tube sizes and operating conditions. Mark what you already have and what should be part of the delivery; this makes the list and the compatibility check more precise.

Cookie su questo sito

I cookie tecnici servono per il funzionamento del carrello e dell'ordine — sono sempre utilizzati. I cookie analitici ci mostrano quali pagine le persone cercano e dove si perdono, e ci aiutano a migliorare il negozio. Li utilizziamo solo se ce lo consenti. Maggiori informazioni nella informativa sul trattamento dei dati.