Fork ultrasonic sensors

IPF fork ultrasonic sensors have the emitter and receiver in a common housing. Choose the UG800170 and UGKB0170 models according to the fork width, material dimensions and mounting space.

Filtros
Encontrado 6 productos

6086478, SICK, ultrasonic web edge sensor UFW3-43B717IZZ, fork 30mm, PNP/NPN, 4–20mA/0–10V, IO-Link, 20–30VDC, Connector M12/5

N.º cat.: 6086478

UFW3-43B717IZZ (6086478), SICK – ultrasonic web edge sensor, fork 30mm, PNP/NPN, 4–20mA/0–10V, IO-Link. Parameters, wiring and manufacturer documentation.

Bajo consulta
658,81 €
sin IVA · 797,16 € con IVA

6086479, SICK, ultrasonic web edge sensor UFW3-43B717ZZZ, fork 30mm, PNP/NPN, 4–20mA/0–10V, IO-Link, 20–30VDC, Connector M12/5

N.º cat.: 6086479

UFW3-43B717ZZZ (6086479), SICK – ultrasonic web edge sensor, fork 30mm, PNP/NPN, 4–20mA/0–10V, IO-Link. Parameters, wiring and manufacturer documentation.

Bajo consulta
678,00 €
sin IVA · 820,38 € con IVA

6086480, SICK, ultrasonic web edge sensor UFW6-73B717IZZ, fork 60mm, PNP/NPN, 4–20mA/0–10V, IO-Link, 20–30VDC, Connector M12/5

N.º cat.: 6086480

UFW6-73B717IZZ (6086480), SICK – ultrasonic web edge sensor, fork 60mm, PNP/NPN, 4–20mA/0–10V, IO-Link. Parameters, wiring and manufacturer documentation.

Bajo consulta
863,49 €
sin IVA · 1 044,82 € con IVA

6086481, SICK, ultrasonic web edge sensor UFW6-73B717ZZZ, fork 60mm, PNP/NPN, 4–20mA/0–10V, IO-Link, 20–30VDC, Connector M12/5

N.º cat.: 6086481

UFW6-73B717ZZZ (6086481), SICK – ultrasonic web edge sensor, fork 60mm, PNP/NPN, 4–20mA/0–10V, IO-Link. Parameters, wiring and manufacturer documentation.

Bajo consulta
882,68 €
sin IVA · 1 068,04 € con IVA

Ultrasonic sensor (fork), /74 80x100x13, UG800170

N.º cat.: UG800170

Ultrasonic sensor (fork), /74 80x100x13, DC,pnp,no,74mm,M8 connector

Bajo consulta
317,73 €
sin IVA · 384,45 € con IVA

Ultrasonic sensor (fork), /114 90x140x13, UGKB0170

N.º cat.: UGKB0170

Ultrasonic sensor (fork), /114 90x140x13, DC,pnp,no,114mm,M8 connector

Bajo consulta
334,03 €
sin IVA · 404,18 € con IVA

Los precios incluyen la tasa de reciclaje.

Ultrasonic fork with fixed head position

The common fork housing holds the emitter and receiver opposite each other. The detected object or material passes through the open gap and affects the sound beam. During installation, the main concerns are therefore the passage of the target, the required insertion depth and the fixing of the entire sensor.

IPF fork ultrasonic sensor in a red aluminium housing
IPF fork version; verify specific dimensions according to the order code.

UG800170 or UGKB0170?

  • UG800170: fork version with a gap width of 74 mm.
  • UGKB0170: fork version with a gap width of 114 mm.

The fork width indicates the mechanical gap between the arms. For mounting, also compare the overall dimensions of the housing and the position of the active surfaces. The gap width alone does not describe all the detection properties of the sensor.

What to consider when choosing and wiring

Measure the largest dimension of the passing target and add space for deflection or vibration. The sensor location must allow the material to pass without touching the arms. Also verify the required sensing frequency and the ability to reliably detect the smallest object.

For the IPF models offered, compare the supply, PNP output, NO function and M8 connector according to the specific documentation. Choose the connecting cable according to the number of pins, wiring and operating environment.

Is a fork sensor automatically a label sensor?

The fork describes the housing design. To distinguish a label from the carrier web, choose a sensor intended for this task and verify the actual material.

Dokumentace: IPF UG800170.

Selection questions

How to choose between a fork gap of 74 and 114 mm?

Compare the largest dimension of the passing material, its deflection and the mounting space. UG800170 has a gap of 74 mm and UGKB0170 114 mm; also verify the insertion depth and the overall drawing of the housing.

Do two separate heads need to be adjusted during mounting?

The fork housing holds the emitter and receiver in a fixed relative position. During installation, you set the position of the whole sensor relative to the material path and check free passage without contact with the arms.

Selection and technical consultation

For selection or replacement, send the complete order code and a description of the application. TECHNOLINE technical support will help compare the required version.

Related: Split ultrasonic through-beam barriers · Label and splice sensors · All special ultrasonic sensors · Sensor Cables and Connectors.

Cookies en este sitio web

Necesitamos las cookies técnicas para que funcionen el carrito y el pedido — se usan siempre. Las cookies analíticas nos muestran qué páginas buscan las personas y dónde se pierden, y nos ayudan a mejorar la tienda. Solo las usaremos si nos lo permites. Más información en la política de tratamiento de datos.