Rievtech Power Supplies

Rievtech RPS and RPS-S series DIN rail power supplies for powering PLCs, relays and sensors. They are an affordable choice for smaller cabinets. Choose by output voltage and current with reserve for inrush peaks.

Filtros
Encontrado 7 productos
EN STOCK

RPS-15-24, Rievtech, switched-mode DIN-rail power supply, 24VDC/0.63A, 15W

N.º cat.: RPS-15-24

RPS-15-24, Rievtech: DIN-rail power supply for powering automation, output 24VDC/0.63A, 15W, input 85–264VAC.

En stock 2 ks
17,32 €
sin IVA · 20,96 € con IVA
EN STOCK

RPS-15-S24 – Rievtech – slim switched-mode DIN-rail power supply, 24VDC/0.65A, 15W, 90–264VAC

N.º cat.: RPS-15-S24

RPS-15-S24 – Rievtech – slim switched-mode DIN-rail power supply, 24VDC/0.65A, 15W, input 90–264VAC. DIN rail, efficiency 84.5%, operation −25 to +70°C, dimensions 103.7×32×97.5mm.

En stock 5 uds. o más
19,49 €
sin IVA · 23,59 € con IVA
EN STOCK

RPS-45-24, Rievtech, switched-mode DIN-rail power supply, 24VDC/2A, 48W

N.º cat.: RPS-45-24

RPS-45-24, Rievtech, industrial switched-mode DIN-rail power supply: output 24VDC/2A (48W), input 85–264VAC, output adjustment 21.6–26.4VDC.

En stock 5 uds. o más
28,26 €
sin IVA · 34,20 € con IVA
EN STOCK

RPS-60-24, Rievtech, switched-mode DIN-rail power supply, 24VDC/2.5A, 60W

N.º cat.: RPS-60-24

The Rievtech power supply RPS-60-24 creates a regulated output of 24VDC for supplying control circuits. It continuously delivers a rated current of 2.5A; for this model, the manufacturer states 60W.

En stock 5 uds. o más
30,06 €
sin IVA · 36,37 € con IVA
EN STOCK

RPS-60-S24, Rievtech, switched-mode DIN-rail power supply, 24VDC/2.5A, 60W

N.º cat.: RPS-60-S24

RPS-60-S24, Rievtech, switched-mode DIN-rail power supply, 24VDC/2.5A, 60W. Model S24 of the RPS-60-S series provides DC power for control circuits with an output current of 2.5A.

En stock 5 uds. o más
32,27 €
sin IVA · 39,05 € con IVA
EN STOCK

RPS-100-24 – Rievtech – switched-mode DIN-rail power supply, 24VDC/4A, 96W, 85–264VAC

N.º cat.: RPS-100-24

RPS-100-24 – Rievtech – switched-mode DIN-rail power supply, 24VDC/4A, 96W, input 85–264VAC. DIN rail, efficiency 87%, operation −20 to +60°C, dimensions 100×93×56mm.

En stock 5 uds. o más
46,56 €
sin IVA · 56,34 € con IVA

RPS-U120S24 – Rievtech – high-power switched-mode DIN-rail power supply, 24VDC/5A, 120W, 90–264VAC

N.º cat.: RPS-U120S24

RPS-U120S24 – Rievtech – high-power switched-mode DIN-rail power supply, 24VDC/5A, 120W, input 90–264VAC. DIN rail, efficiency 88%, operation −20 to +70°C, dimensions 124×119×45mm.

Bajo consulta
53,08 €
sin IVA · 64,23 € con IVA

Los precios incluyen la tasa de reciclaje.

Rievtech power supplies

The category contains RPS-15-24, RPS-15-S24, RPS-45-24, RPS-60-24, RPS-60-S24, RPS-100-24 and RPS-U120S24. The complete code, including the letter S and its position, is essential for selection. The series name alone does not guarantee specific power, dimensions or the same overload behaviour.

Choosing a power supply for a small automation assembly

A switched-mode AC/DC power supply creates a regulated DC supply for compatible loads. It is not a communication accessory that would ensure PLC compatibility by itself. The connected unit must have a suitable supply input, polarity and permissible voltage range. Count the current of loads switched by relay contacts only in the branch from which they are actually supplied.

The catalogue RPS-60-24 and RPS-60-S24 are listed with the same output of 24 V DC, 2.5 A and 60 W, but different housing dimensions. Before replacing, therefore check the installation profile and cable reach. The product groups are also distinguished in the manufacturer's official RPS overview; not all its variants are automatically part of this category.

Electrical limits and operating conditions

For each power supply, distinguish the mains input from the regulated output. For example, 24 V DC describes the required load supply, not automatically the permissible supply to the power supply. Before connecting, compare the terminal diagram, rating plate and data sheet of the exact type; do not infer the meaning of the voltage only from the short item name.

The manufacturer table RPS-45 distinguishes the input inrush current, overload protection and behaviour after overvoltage. This information does not give permission for arbitrary overloading. For the chosen type, separately verify the start-up of a capacitive load, any power reduction at higher temperature and the method of recovery after a fault. The operating temperature range alone does not guarantee full power over the entire interval.

Model example of simultaneous operation

Consider a hypothetical controller with a consumption of 0.2 A, a display 0.35 A and four output loads of 0.25 A each on a common 24 V branch. With simultaneous switching, the result is 1.55 A. If a communication device with a start-up consumption of 1 A for 200 ms is added, the design must handle a total of 2.55 A during this time. The values are model values, not data of specific Rievtech products.

The rated 2.5 A of the candidate is therefore not in itself confirmation of suitability. Verify the short-term mode, temperature and voltage directly at the controller. If the documentation does not cover the start-up profile, choose a sufficiently sized solution or adjust the simultaneity in a verified way. Do not rely on random timing of switch-on.

FAQ

Is a power supply a SELV or PELV safety supply just because it has 24 V?

No. Verify the necessary protective separation and conditions of use in the documents of the exact type and in the design of the whole installation. A general short-circuit protection designation is not such a document.

Can I exchange an RPS with an identically numbered one from another brand?

The code alone without the manufacturer is not enough. Also compare the purpose, input, version and current documentation. A checklist for electrical wiring, mechanical mounting and protection is contained in the main guide Power supplies.

Cookies en este sitio web

Necesitamos las cookies técnicas para que funcionen el carrito y el pedido — se usan siempre. Las cookies analíticas nos muestran qué páginas buscan las personas y dónde se pierden, y nos ayudan a mejorar la tienda. Solo las usaremos si nos lo permites. Más información en la política de tratamiento de datos.