Pneumatic accessories

SMC, Pneuflex and other pneumatic accessories – push-in fittings, threaded fittings, reducers, flow control valves, silencers, plugs, blow guns and suction cups. Choose by tube diameter and connection thread.

Subcategorías

Filtros
Encontrado 696 productos

KQ2Y04-M5A, SMC, run-through T-fitting with thread, tube Ø4mm, male M5

N.º cat.: KQ2Y04-M5A

KQ2Y04-M5A, SMC, run-through T-fitting with thread, tube Ø4mm, male M5. Air branching from threaded port M5 into several tube outlets.

Bajo consulta
5,19 €
sin IVA · 6,28 € con IVA
NUESTRO CONSEJO

AN20-02, SMC, pneumatic exhaust silencer, thread R1/4, body size 20

N.º cat.: AN20-02

AN20-02, SMC: pneumatic exhaust silencer. thread R1/4, body size 20. Use in pneumatic distribution and verified mounting criteria.

Bajo consulta
5,29 €
sin IVA · 6,40 € con IVA

KQ2T08-10A, SMC, T-connector, reducer Ø8mm↔Ø10mm

N.º cat.: KQ2T08-10A

KQ2T08-10A, SMC, T-connector, reducer Ø8mm↔Ø10mm. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance.

Bajo consulta
5,31 €
sin IVA · 6,43 € con IVA

KQ2S12-02NS, SMC, straight fitting with internal hexagon, tube Ø12mm, male R1/4

N.º cat.: KQ2S12-02NS

KQ2S12-02NS, SMC, straight fitting with internal hexagon, tube Ø12mm, male R1/4. Straight connection of the tube to threaded port R1/4; the thread seal must be verified.

Bajo consulta
5,31 €
sin IVA · 6,43 € con IVA

KQ2E06-03A, SMC, bulkhead fitting, tube Ø6mm, female Rc3/8

N.º cat.: KQ2E06-03A

KQ2E06-03A, SMC, bulkhead fitting, tube Ø6mm, female Rc3/8. Fixed pass-through of a pneumatic line through a mounting plate or cabinet wall.

Bajo consulta
5,31 €
sin IVA · 6,43 € con IVA

KQ2L10-01AS, SMC, elbow fitting 90°, tube Ø10mm, male R1/8

N.º cat.: KQ2L10-01AS

KQ2L10-01AS, SMC, elbow fitting 90°, tube Ø10mm, male R1/8. Elbow connection of the tube to threaded port R1/8; changes the line direction at the component. With pre-applied thread seal.

Bajo consulta
5,31 €
sin IVA · 6,43 € con IVA

KQ2L10-02AS, SMC, elbow fitting 90°, tube Ø10mm, male R1/4

N.º cat.: KQ2L10-02AS

KQ2L10-02AS, SMC, elbow fitting 90°, tube Ø10mm, male R1/4. Elbow connection of the tube to threaded port R1/4; changes the line direction at the component. With pre-applied thread seal.

Bajo consulta
5,39 €
sin IVA · 6,53 € con IVA

KQB2L08-02S, SMC, brass elbow push-in fitting, tube Ø8mm, thread R1/4

N.º cat.: KQB2L08-02S

KQB2L08-02S, SMC: brass elbow push-in fitting; tube Ø8mm, thread R1/4. Dimensions and use according to the catalogue series.

Bajo consulta
5,44 €
sin IVA · 6,58 € con IVA

KQ2T04-M5A, SMC, T-connector, tube Ø4mm, male M5

N.º cat.: KQ2T04-M5A

KQ2T04-M5A, SMC, T-connector, tube Ø4mm, male M5. Air branching from threaded port M5 into several tube outlets.

Bajo consulta
5,44 €
sin IVA · 6,58 € con IVA
NUESTRO CONSEJO

KQ2H06-08A, SMC, straight fitting, reducer Ø6mm↔Ø8mm

N.º cat.: KQ2H06-08A

KQ2H06-08A, SMC, straight fitting, reducer Ø6mm↔Ø8mm. Straight connection of two tubes; suitable for extending a pneumatic route without a thread.

Bajo consulta
5,44 €
sin IVA · 6,58 € con IVA
NUESTRO CONSEJO

AN101-01, SMC, pneumatic exhaust silencer, thread R1/8, body size 101

N.º cat.: AN101-01

AN101-01, SMC: pneumatic exhaust silencer. thread R1/8, body size 101. Use in pneumatic distribution and verified mounting criteria.

Bajo consulta
5,47 €
sin IVA · 6,62 € con IVA

KQ2L10-03AS, SMC, elbow fitting 90°, tube Ø10mm, male R3/8

N.º cat.: KQ2L10-03AS

KQ2L10-03AS, SMC, elbow fitting 90°, tube Ø10mm, male R3/8. Elbow connection of the tube to threaded port R3/8; changes the line direction at the component. With pre-applied thread seal.

Bajo consulta
5,48 €
sin IVA · 6,63 € con IVA

KQ2T04-06A, SMC, T-connector, reducer Ø4mm↔Ø6mm

N.º cat.: KQ2T04-06A

KQ2T04-06A, SMC, T-connector, reducer Ø4mm↔Ø6mm. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance.

Bajo consulta
5,52 €
sin IVA · 6,68 € con IVA

KQ2E06-00A, SMC, bulkhead fitting, tube Ø6mm on both sides

N.º cat.: KQ2E06-00A

KQ2E06-00A, SMC, bulkhead fitting, tube Ø6mm on both sides. Fixed pass-through of a pneumatic line through a mounting plate or cabinet wall.

Bajo consulta
5,52 €
sin IVA · 6,68 € con IVA

KQ2TW08-00A, SMC, cross fitting, 4× tube Ø8mm

N.º cat.: KQ2TW08-00A

KQ2TW08-00A, SMC, cross fitting, 4× tube Ø8mm. Cross connection of four pneumatic branches at a single point.

Bajo consulta
5,52 €
sin IVA · 6,68 € con IVA
NUESTRO CONSEJO

TBPE12, TECHNOLINE, all-metal T-connector for Ø12mm tube

N.º cat.: TBPE12

TBPE12, TECHNOLINE, all-metal T-connector for Ø12mm tube. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance. Metal body.

Bajo consulta
5,66 €
sin IVA · 6,85 € con IVA

KQ2T10-00A, SMC, T-connector, 3× tube Ø10mm

N.º cat.: KQ2T10-00A

KQ2T10-00A, SMC, T-connector, 3× tube Ø10mm. Branching into three pneumatic branches; the flow is divided according to consumption and line resistance.

Bajo consulta
5,72 €
sin IVA · 6,92 € con IVA
NUESTRO CONSEJO

KQ2H12-04AS, SMC, straight push-in fitting with male thread, tube Ø12mm, thread R1/2

N.º cat.: KQ2H12-04AS

KQ2H12-04AS, SMC: straight push-in fitting with male thread; tube Ø12mm, thread R1/2. Dimensions and use according to the catalogue series.

Bajo consulta
5,72 €
sin IVA · 6,92 € con IVA

Los precios incluyen la tasa de reciclaje.

Pneumatic accessories

Pneumatic accessories connect individual parts of the air circuit and help adapt its arrangement to a specific machine. When selecting, you need to know not only the part designation, but also both connected counterparts, the required function and operating conditions. A similar appearance of fittings or the same brand do not by themselves confirm interchangeability. This category is a signpost for line design, air distribution, flow adjustment and vacuum gripping.

Select the branch according to the task in the circuit

  • Threaded fitting: connection to a specific threaded port of the equipment.
  • Push-in fittings: selecting a connection for the corresponding pipe or tube.
  • Bulkhead fittings: passing the line through a panel with resolved fixing.
  • Reducing fittings: connecting different connection sizes.
  • Flow control valves: flow adjustment taking into account the direction and function of the valve.
  • Silencers: exhaust accessories, which are also selected according to flow requirements.
  • Blanking plugs: closing the connection with a corresponding version.
  • Blow gun: manual work with air according to the rules of the given workplace.
  • Pneumatic suction cups: contact of the vacuum gripper with the surface of the handled part.

Three checks before ordering

Mechanical interface: record the full connection designation on both sides. For the tube, distinguish the outer and inner diameter; for the thread, its type, size and sealing method. Also check the space for mounting and service; the correct part may not be suitable for an installation that is too tight.

Function: draw where the medium should flow from and to. Connecting, branching, blanking, throttling and gripping are different tasks. For more complex accessories, compare the diagram and the full order code, not just the first part of the name.

Operating conditions: verify the permissible medium, pressure, temperature and environment for the specific version in the manufacturer's documentation. Assess use in vacuum separately. Do not derive the permitted range of the whole assembly from a parameter of one of its elements.

Model list of connection points

Let us consider four workstations, each with two separate lines. If each line forms one uninterrupted section, eight sections have a total of sixteen ends to connect. Dividing all eight sections into two parts adds eight intermediate fittings and sixteen more tube ends. This is our own inventory example, not a calculation of pressure loss or probability of leakage. It helps reveal missing counterparts and distinguish a spare piece from a part actually needed in the assembly.

Mounting and troubleshooting

Before intervention, shut down the equipment according to its instructions and secure it against unexpected movement. Disconnect lines only after safely removing pressure; for vacuum gripping, first secure the transported object. Take the mounting procedure, tightening and insertion check from the instructions of the specific accessory. After assembly, verify tightness, actual function and maintenance access during controlled commissioning.

In case of a leak, first determine its location, then check the counterpart, line size, seal condition and mechanical stress on the joint. In case of slow movement, monitor the whole supply and exhaust. Random replacement of one part without verifying the cause can leave the original problem in another part of the circuit.

FAQ

Can I replace a fitting based on a photo?

A photo helps determine the shape. For ordering, however, add dimensions, exact connection, function and operating limitations. For a replacement, record the original code and also compare the counterpart.

How to prepare documentation for selecting accessories?

Attach a simple circuit diagram, a list of connections, tube sizes and operating conditions. Mark what you already have and what should be part of the delivery; this makes the list and the compatibility check more precise.

Cookies en este sitio web

Necesitamos las cookies técnicas para que funcionen el carrito y el pedido — se usan siempre. Las cookies analíticas nos muestran qué páginas buscan las personas y dónde se pierden, y nos ayudan a mejorar la tienda. Solo las usaremos si nos lo permites. Más información en la política de tratamiento de datos.