TBPL08-G01, TECHNOLINE, all-metal elbow push-in fitting 90°, tube Ø8mm, male thread G1/8
TBPL08-G01, TECHNOLINE: elbow push-in fitting 90°; tube Ø8mm, male thread G1/8. Push-in connection for pneumatics.
Tipo de cambio 24,47 Kč por 1 EUR. Los precios son orientativos; la facturación se realiza en coronas checas.
SMC, Pneuflex and other pneumatic accessories – push-in fittings, threaded fittings, reducers, flow control valves, silencers, plugs, blow guns and suction cups. Choose by tube diameter and connection thread.
TBPL08-G01, TECHNOLINE: elbow push-in fitting 90°; tube Ø8mm, male thread G1/8. Push-in connection for pneumatics.
KQ2L06-M6N1, SMC, elbow fitting 90°, tube Ø6mm, male M6. Elbow connection of the tube to threaded port M6; changes the line direction at the component. Nickel-plated brass threaded part, oval release…
TPCF16-G02, TECHNOLINE: straight push-in fitting with female thread; tube Ø16mm, female thread G1/4. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.
TBPL06-G03, TECHNOLINE: elbow push-in fitting 90°; tube Ø6mm, male thread G3/8. Push-in connection for pneumatics.
TBPL06-G04, TECHNOLINE: elbow push-in fitting 90°; tube Ø6mm, male thread G1/2. Push-in connection for pneumatics.
TBPL12-G01, TECHNOLINE: elbow push-in fitting 90°; tube Ø12mm, male thread G1/8. Push-in connection for pneumatics.
KQ2T02-M5N, SMC: T-fitting with male thread; tube Ø2mm, thread M5. Dimensions and use according to the catalogue series.
AN15-C08, SMC: pneumatic exhaust silencer. push-in connection Ø8mm, body size 15. Use in pneumatic distribution and verified mounting criteria.
KQ2H10-01AS, SMC: straight push-in fitting with male thread; tube Ø10mm, thread R1/8. Dimensions and use according to the catalogue series.
KQ2U04-06A, SMC, Y-connector, reducer Ø4mm↔Ø6mm. Angled Y-branching for routing three branches with suitable tube geometry.
TBPM06, TECHNOLINE: all-metal bulkhead push-in fitting. 2× tube outer Ø6mm, panel mounting. Use in pneumatic distribution and verified mounting criteria.
KQ2L06-M5N1, SMC, elbow fitting 90°, tube Ø6mm, male M5. Elbow connection of the tube to threaded port M5; changes the line direction at the component. Nickel-plated brass threaded part, oval release…
TPCF16-G03, TECHNOLINE: straight push-in fitting with female thread; tube Ø16mm, female thread G3/8. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.
TBPC08-G04, TECHNOLINE: straight push-in fitting; tube Ø8mm, male thread G1/2. Push-in connection for pneumatics.
TBPL08-G02, TECHNOLINE: elbow push-in fitting 90°; tube Ø8mm, male thread G1/4. Push-in connection for pneumatics.
KQ2T06-04A, SMC, T-connector, tube Ø6mm, male R1/2. Air branching from threaded port R1/2 into several tube outlets.
KQ2E06-01A, SMC, bulkhead fitting, tube Ø6mm, female Rc1/8. Fixed pass-through of a pneumatic line through a mounting plate or cabinet wall.
ZP2-B10MTS, SMC: vacuum suction cup. Ø10mm, MT – thin flat with groove, silicone. Selection by profile, mounting and vacuum.
AN110-01, SMC: pneumatic exhaust silencer. thread R1/8, body size 110. Use in pneumatic distribution and verified mounting criteria.
TBPD06-G01, TECHNOLINE: push-in T-fitting, thread in the run branch; tube Ø6mm, male thread G1/8. Push-in connection for pneumatics.
KQ2H10-04AS, SMC: straight push-in fitting with male thread; tube Ø10mm, thread R1/2. Dimensions and use according to the catalogue series.
TPCF16-G04, TECHNOLINE: straight push-in fitting with female thread; tube Ø16mm, female thread G1/2. Series 0–10bar, 0 to +60°C. Push-in connection for pneumatics.
KQ2H10-00A, SMC, straight fitting, 2× tube Ø10mm. Straight connection of two tubes; suitable for extending a pneumatic route without a thread.
KQ2L10-00A, SMC, elbow fitting 90°, 2× tube Ø10mm. Change of line direction by 90° without a sharp tube bend right at the joint.
KQ2E06-02A, SMC, bulkhead fitting, tube Ø6mm, female Rc1/4. Fixed pass-through of a pneumatic line through a mounting plate or cabinet wall.
Los precios incluyen la tasa de reciclaje.
Pneumatic accessories connect individual parts of the air circuit and help adapt its arrangement to a specific machine. When selecting, you need to know not only the part designation, but also both connected counterparts, the required function and operating conditions. A similar appearance of fittings or the same brand do not by themselves confirm interchangeability. This category is a signpost for line design, air distribution, flow adjustment and vacuum gripping.
Mechanical interface: record the full connection designation on both sides. For the tube, distinguish the outer and inner diameter; for the thread, its type, size and sealing method. Also check the space for mounting and service; the correct part may not be suitable for an installation that is too tight.
Function: draw where the medium should flow from and to. Connecting, branching, blanking, throttling and gripping are different tasks. For more complex accessories, compare the diagram and the full order code, not just the first part of the name.
Operating conditions: verify the permissible medium, pressure, temperature and environment for the specific version in the manufacturer's documentation. Assess use in vacuum separately. Do not derive the permitted range of the whole assembly from a parameter of one of its elements.
Let us consider four workstations, each with two separate lines. If each line forms one uninterrupted section, eight sections have a total of sixteen ends to connect. Dividing all eight sections into two parts adds eight intermediate fittings and sixteen more tube ends. This is our own inventory example, not a calculation of pressure loss or probability of leakage. It helps reveal missing counterparts and distinguish a spare piece from a part actually needed in the assembly.
Before intervention, shut down the equipment according to its instructions and secure it against unexpected movement. Disconnect lines only after safely removing pressure; for vacuum gripping, first secure the transported object. Take the mounting procedure, tightening and insertion check from the instructions of the specific accessory. After assembly, verify tightness, actual function and maintenance access during controlled commissioning.
In case of a leak, first determine its location, then check the counterpart, line size, seal condition and mechanical stress on the joint. In case of slow movement, monitor the whole supply and exhaust. Random replacement of one part without verifying the cause can leave the original problem in another part of the circuit.
A photo helps determine the shape. For ordering, however, add dimensions, exact connection, function and operating limitations. For a replacement, record the original code and also compare the counterpart.
Attach a simple circuit diagram, a list of connections, tube sizes and operating conditions. Mark what you already have and what should be part of the delivery; this makes the list and the compatibility check more precise.
Necesitamos las cookies técnicas para que funcionen el carrito y el pedido — se usan siempre. Las cookies analíticas nos muestran qué páginas buscan las personas y dónde se pierden, y nos ayudan a mejorar la tienda. Solo las usaremos si nos lo permites. Más información en la política de tratamiento de datos.
Elige qué cookies podemos usar. Puedes cambiar tu elección en cualquier momento.
Guardan el contenido del carrito, el inicio de sesión y el idioma elegido, y protegen los formularios frente a abusos. Sin ellas no se puede finalizar el pedido, por eso se utilizan incluso sin consentimiento.
Google Analytics nos muestra de forma agregada el tráfico y el comportamiento en el sitio. Así sabemos qué páginas no funcionan para los usuarios. Con estos datos no identificamos a nadie.