Pneumatic accessories

SMC, Pneuflex and other pneumatic accessories – push-in fittings, threaded fittings, reducers, flow control valves, silencers, plugs, blow guns and suction cups. Choose by tube diameter and connection thread.

Subcategorías

Filtros
Encontrado 696 productos

KQ2S06-M6A, SMC, straight fitting with internal hexagon, tube Ø6mm, male M6

N.º cat.: KQ2S06-M6A

KQ2S06-M6A, SMC, straight fitting with internal hexagon, tube Ø6mm, male M6. Straight connection of the tube to threaded port M6; the thread seal must be verified.

Bajo consulta
2,66 €
sin IVA · 3,21 € con IVA

KQ2S06-02AS, SMC, straight fitting with internal hexagon, tube Ø6mm, male R1/4

N.º cat.: KQ2S06-02AS

KQ2S06-02AS, SMC, straight fitting with internal hexagon, tube Ø6mm, male R1/4. Straight connection of the tube to threaded port R1/4; with pre-applied thread seal.

Bajo consulta
2,66 €
sin IVA · 3,21 € con IVA

KQ2L04-00A, SMC, elbow fitting 90°, 2× tube Ø4mm

N.º cat.: KQ2L04-00A

KQ2L04-00A, SMC, elbow fitting 90°, 2× tube Ø4mm. Change of line direction by 90° without a sharp tube bend right at the joint.

Bajo consulta
2,66 €
sin IVA · 3,21 € con IVA

KQ2S02-M3G, SMC, straight fitting with internal hexagon, tube Ø2mm, male M3

N.º cat.: KQ2S02-M3G

KQ2S02-M3G, SMC, straight fitting with internal hexagon, tube Ø2mm, male M3. Straight connection of the tube to threaded port M3; the thread seal must be verified.

Bajo consulta
2,66 €
sin IVA · 3,21 € con IVA

KQ2H04-M5A, SMC, straight push-in fitting with male thread, tube Ø4mm, thread M5

N.º cat.: KQ2H04-M5A

KQ2H04-M5A, SMC: straight push-in fitting with male thread; tube Ø4mm, thread M5. Dimensions and use according to the catalogue series.

Bajo consulta
2,66 €
sin IVA · 3,21 € con IVA

KQ2H08-01A, SMC, straight fitting, tube Ø8mm, male R1/8

N.º cat.: KQ2H08-01A

KQ2H08-01A, SMC, straight fitting, tube Ø8mm, male R1/8. Straight connection of the tube to threaded port R1/8; the thread seal must be verified.

Bajo consulta
2,66 €
sin IVA · 3,21 € con IVA

KQ2H04-M3G, SMC, straight fitting, tube Ø4mm, male M3

N.º cat.: KQ2H04-M3G

KQ2H04-M3G, SMC, straight fitting, tube Ø4mm, male M3. Straight connection of the tube to threaded port M3; the thread seal must be verified.

Bajo consulta
2,66 €
sin IVA · 3,21 € con IVA

KQ2F04-01A, SMC, straight fitting with female thread, tube Ø4mm, female Rc1/8

N.º cat.: KQ2F04-01A

KQ2F04-01A, SMC, straight fitting with female thread, tube Ø4mm, female Rc1/8. Straight connection of the tube to threaded port Rc1/8; the thread seal must be verified.

Bajo consulta
2,66 €
sin IVA · 3,21 € con IVA

KQ2H08-02AS, SMC, straight fitting, tube Ø8mm, male R1/4

N.º cat.: KQ2H08-02AS

KQ2H08-02AS, SMC, straight fitting, tube Ø8mm, male R1/4. Straight connection of the tube to threaded port R1/4; with pre-applied thread seal.

Bajo consulta
2,74 €
sin IVA · 3,31 € con IVA

KQ2L08-10A, SMC, elbow reducing adapter 90°, tube Ø8mm / plug-in stem Ø10mm

N.º cat.: KQ2L08-10A

KQ2L08-10A, SMC, elbow reducing adapter 90°, tube Ø8mm / plug-in stem Ø10mm. Elbow reducer 90°: push-in tube Ø8mm, plug-in stem Ø10mm into the counterpart.

Bajo consulta
2,78 €
sin IVA · 3,36 € con IVA

KQ2N08-10, SMC, plug-in connecting stem, stem reducer Ø8mm↔Ø10mm

N.º cat.: KQ2N08-10

KQ2N08-10, SMC, plug-in connecting stem, stem reducer Ø8mm↔Ø10mm. A plug-in connecting stem connecting existing push-in fittings, not loose tubes.

Bajo consulta
2,82 €
sin IVA · 3,41 € con IVA
NUESTRO CONSEJO

KQ2H08-03AS, SMC, straight push-in fitting with male thread, tube Ø8mm, thread R3/8

N.º cat.: KQ2H08-03AS

KQ2H08-03AS, SMC: straight push-in fitting with male thread; tube Ø8mm, thread R3/8. Dimensions and use according to the catalogue series.

Bajo consulta
2,86 €
sin IVA · 3,46 € con IVA

KQ2U04-00A, SMC, Y-connector, 3× tube Ø4mm

N.º cat.: KQ2U04-00A

KQ2U04-00A, SMC, Y-connector, 3× tube Ø4mm. Angled Y-branching for routing three branches with suitable tube geometry.

Bajo consulta
2,86 €
sin IVA · 3,46 € con IVA

KQ2R06-04A, SMC, plug-in reducer into a push-in fitting, tube Ø6mm → stem for Ø4mm port

N.º cat.: KQ2R06-04A

KQ2R06-04A, SMC: plug-in reducer into a push-in fitting. tube Ø6mm → stem for Ø4mm port. Use in pneumatic distribution and verified mounting criteria.

Bajo consulta
2,86 €
sin IVA · 3,46 € con IVA

KQ2L06-99A, SMC, elbow fitting 90°, plug-in stem and tube Ø6mm

N.º cat.: KQ2L06-99A

KQ2L06-99A, SMC, elbow fitting 90°, plug-in stem and tube Ø6mm. A plug-in adapter into a push-in counterpart with a separate tube connection.

Bajo consulta
2,86 €
sin IVA · 3,46 € con IVA

KQ2VS06-M5A, SMC, swivel elbow push-in fitting 90°, tube Ø6mm, M5×0.8

N.º cat.: KQ2VS06-M5A

KQ2VS06-M5A, SMC, swivel elbow fitting 90°, tube Ø6mm, male M5×0.8, −1 to +10bar, −5 to +60°C. Price per 1ks.

Bajo consulta
2,86 €
sin IVA · 3,46 € con IVA

KQ2S08-01AS, SMC, straight fitting with internal hexagon, tube Ø8mm, male R1/8

N.º cat.: KQ2S08-01AS

KQ2S08-01AS, SMC, straight fitting with internal hexagon, tube Ø8mm, male R1/8. Straight connection of the tube to threaded port R1/8; with pre-applied thread seal.

Bajo consulta
2,94 €
sin IVA · 3,56 € con IVA

KQ2E02-00NJ, SMC, bulkhead fitting, tube Ø2mm on both sides

N.º cat.: KQ2E02-00NJ

KQ2E02-00NJ, SMC, bulkhead fitting, tube Ø2mm on both sides. Fixed pass-through of a pneumatic line through a mounting plate or cabinet wall.

Bajo consulta
2,98 €
sin IVA · 3,61 € con IVA

Los precios incluyen la tasa de reciclaje.

Pneumatic accessories

Pneumatic accessories connect individual parts of the air circuit and help adapt its arrangement to a specific machine. When selecting, you need to know not only the part designation, but also both connected counterparts, the required function and operating conditions. A similar appearance of fittings or the same brand do not by themselves confirm interchangeability. This category is a signpost for line design, air distribution, flow adjustment and vacuum gripping.

Select the branch according to the task in the circuit

  • Threaded fitting: connection to a specific threaded port of the equipment.
  • Push-in fittings: selecting a connection for the corresponding pipe or tube.
  • Bulkhead fittings: passing the line through a panel with resolved fixing.
  • Reducing fittings: connecting different connection sizes.
  • Flow control valves: flow adjustment taking into account the direction and function of the valve.
  • Silencers: exhaust accessories, which are also selected according to flow requirements.
  • Blanking plugs: closing the connection with a corresponding version.
  • Blow gun: manual work with air according to the rules of the given workplace.
  • Pneumatic suction cups: contact of the vacuum gripper with the surface of the handled part.

Three checks before ordering

Mechanical interface: record the full connection designation on both sides. For the tube, distinguish the outer and inner diameter; for the thread, its type, size and sealing method. Also check the space for mounting and service; the correct part may not be suitable for an installation that is too tight.

Function: draw where the medium should flow from and to. Connecting, branching, blanking, throttling and gripping are different tasks. For more complex accessories, compare the diagram and the full order code, not just the first part of the name.

Operating conditions: verify the permissible medium, pressure, temperature and environment for the specific version in the manufacturer's documentation. Assess use in vacuum separately. Do not derive the permitted range of the whole assembly from a parameter of one of its elements.

Model list of connection points

Let us consider four workstations, each with two separate lines. If each line forms one uninterrupted section, eight sections have a total of sixteen ends to connect. Dividing all eight sections into two parts adds eight intermediate fittings and sixteen more tube ends. This is our own inventory example, not a calculation of pressure loss or probability of leakage. It helps reveal missing counterparts and distinguish a spare piece from a part actually needed in the assembly.

Mounting and troubleshooting

Before intervention, shut down the equipment according to its instructions and secure it against unexpected movement. Disconnect lines only after safely removing pressure; for vacuum gripping, first secure the transported object. Take the mounting procedure, tightening and insertion check from the instructions of the specific accessory. After assembly, verify tightness, actual function and maintenance access during controlled commissioning.

In case of a leak, first determine its location, then check the counterpart, line size, seal condition and mechanical stress on the joint. In case of slow movement, monitor the whole supply and exhaust. Random replacement of one part without verifying the cause can leave the original problem in another part of the circuit.

FAQ

Can I replace a fitting based on a photo?

A photo helps determine the shape. For ordering, however, add dimensions, exact connection, function and operating limitations. For a replacement, record the original code and also compare the counterpart.

How to prepare documentation for selecting accessories?

Attach a simple circuit diagram, a list of connections, tube sizes and operating conditions. Mark what you already have and what should be part of the delivery; this makes the list and the compatibility check more precise.

Cookies en este sitio web

Necesitamos las cookies técnicas para que funcionen el carrito y el pedido — se usan siempre. Las cookies analíticas nos muestran qué páginas buscan las personas y dónde se pierden, y nos ayudan a mejorar la tienda. Solo las usaremos si nos lo permites. Más información en la política de tratamiento de datos.