Pneumatic cylinders

SMC and Festo pneumatic cylinders – ISO, compact, miniature, round, guided and rodless. Choose by bore, stroke, required force, mounting and position sensing.

Filtros
Encontrado 414 productos

CD55B100-50M, SMC, pneumatic cylinder, diameter 100 mm, stroke 50 mm, magnet

N.º cat.: CD55B100-50M

CD55B100-50M, SMC, pneumatic cylinder, diameter 100 mm, stroke 50 mm, magnet. A pneumatic cylinder converts the energy of compressed air into linear motion.

Bajo consulta
187,94 €
sin IVA · 227,41 € con IVA

Pneumatic cylinder TP96SDB100-125C, cylinder diameter 100mm, stroke 125mm, ISO15552

N.º cat.: TP96SDB100-125C

pneumatic cylinder with a diameter of 100mm, piston rod stroke 125mm, maximum working pressure 10bar, built-in magnet, air connection thread G1/2", double-acting, CNOMO and C-slot for sensors…

Bajo consulta
189,01 €
sin IVA · 228,70 € con IVA

Pneumatic cylinder TP96SDB100-150C, cylinder diameter 100mm, stroke 150mm, ISO15552

N.º cat.: TP96SDB100-150C

pneumatic cylinder with a diameter of 100mm, piston rod stroke 150mm, maximum working pressure 10bar, built-in magnet, air connection thread G1/2", double-acting, CNOMO and C-slot for sensors…

Bajo consulta
191,21 €
sin IVA · 231,37 € con IVA

Pneumatic cylinder TP96SDB100-160C, cylinder diameter 100mm, stroke 160mm, ISO15552

N.º cat.: TP96SDB100-160C

pneumatic cylinder with a diameter of 100mm, piston rod stroke 160mm, maximum working pressure 10bar, built-in magnet, air connection thread G1/2", double-acting, CNOMO and C-slot for sensors…

Bajo consulta
192,32 €
sin IVA · 232,70 € con IVA

Pneumatic cylinder TP96SDB100-200C, cylinder diameter 100mm, stroke 200mm, ISO15552

N.º cat.: TP96SDB100-200C

pneumatic cylinder with a diameter of 100mm, piston rod stroke 200mm, maximum working pressure 10bar, built-in magnet, air connection thread G1/2", double-acting, CNOMO and C-slot for sensors…

Bajo consulta
196,73 €
sin IVA · 238,04 € con IVA

MGPM16-25Z, SMC, pneumatic cylinder, diameter 16 mm, stroke 25 mm

N.º cat.: MGPM16-25Z

MGPM16-25Z, SMC, pneumatic cylinder, diameter 16 mm, stroke 25 mm. A guided cylinder combines linear motion with guidance against rotation and lateral load.

Bajo consulta
197,79 €
sin IVA · 239,33 € con IVA

Pneumatic cylinder TP96SDB100-250C, cylinder diameter 100mm, stroke 250mm, ISO15552

N.º cat.: TP96SDB100-250C

pneumatic cylinder with a diameter of 100mm, piston rod stroke 250mm, maximum working pressure 10bar, built-in magnet, air connection thread G1/2", double-acting, CNOMO and C-slot for sensors…

Bajo consulta
202,25 €
sin IVA · 244,72 € con IVA

Pneumatic cylinder TP96SDB100-300C, cylinder diameter 100mm, stroke 300mm, ISO15552

N.º cat.: TP96SDB100-300C

pneumatic cylinder with a diameter of 100mm, piston rod stroke 300mm, maximum working pressure 10bar, built-in magnet, air connection thread G1/2", double-acting, CNOMO and C-slot for sensors…

Bajo consulta
207,76 €
sin IVA · 251,40 € con IVA

CDM2B40-600AZ, SMC, round cylinder, diameter 40 mm, stroke 600 mm

N.º cat.: CDM2B40-600AZ

CDM2B40-600AZ, SMC, round cylinder, diameter 40 mm, stroke 600 mm. A pneumatic cylinder converts the energy of compressed air into linear motion.

Bajo consulta
209,24 €
sin IVA · 253,18 € con IVA

Pneumatic cylinder TP96SDB100-320C, cylinder diameter 100mm, stroke 320mm, ISO15552

N.º cat.: TP96SDB100-320C

pneumatic cylinder with a diameter of 100mm, piston rod stroke 320mm, maximum working pressure 10bar, built-in magnet, air connection thread G1/2", double-acting, CNOMO and C-slot for sensors…

Bajo consulta
209,97 €
sin IVA · 254,07 € con IVA

MHC2-10S, SMC, gripper, standard

N.º cat.: MHC2-10S

MHC2-10S, SMC, gripper, standard. A pneumatic gripper is used for gripping, holding and handling parts.

Bajo consulta
210,05 €
sin IVA · 254,16 € con IVA

DFM-12-30-P-A-GF, guided cylinder, 170827, Festo

N.º cat.: DFM-12-30-P-A-GF

DFM-12-30-P-A-GF, guided cylinder, 170827, Festo

Bajo consulta
213,32 €
sin IVA · 258,12 € con IVA

MGPM12-125Z, compact cylinder, SMC

N.º cat.: MGPM12-125Z

MGPM12-125Z, compact cylinder, SMC

Bajo consulta
215,37 €
sin IVA · 260,59 € con IVA

Pneumatic cylinder TP96SDB100-400C, cylinder diameter 100mm, stroke 400mm, ISO15552

N.º cat.: TP96SDB100-400C

pneumatic cylinder with a diameter of 100mm, piston rod stroke 400mm, maximum working pressure 10bar, built-in magnet, air connection thread G1/2", double-acting, CNOMO and C-slot for sensors…

Bajo consulta
218,80 €
sin IVA · 264,75 € con IVA

MGQM16-30, SMC, compact cylinder, diameter 16 mm, stroke 30 mm

N.º cat.: MGQM16-30

MGQM16-30, SMC, compact cylinder, diameter 16 mm, stroke 30 mm. A guided cylinder combines linear motion with guidance against rotation and lateral load.

Bajo consulta
219,66 €
sin IVA · 265,78 € con IVA

MKB32-10RZ, SMC, rotary clamp cylinder, diameter 32 mm, stroke 10 mm

N.º cat.: MKB32-10RZ

MKB32-10RZ, SMC, rotary clamp cylinder, diameter 32 mm, stroke 10 mm. A pneumatic cylinder converts the energy of compressed air into linear motion.

Bajo consulta
225,58 €
sin IVA · 272,95 € con IVA

MGPM20-25Z, compact cylinder, with slide /linear guide, SMC

N.º cat.: MGPM20-25Z

MGPM20-25Z, compact cylinder, with slide /linear guide, SMC

Bajo consulta
228,85 €
sin IVA · 276,91 € con IVA

TP96SDB100-500C, SMC, pneumatic cylinder, cylinder diameter 100 mm, stroke 500 mm, ISO15552

N.º cat.: TP96SDB100-500C

TP96SDB100-500C, SMC, pneumatic cylinder, cylinder diameter 100 mm, stroke 500 mm, ISO15552. A pneumatic cylinder converts the energy of compressed air into linear motion.

Bajo consulta
229,83 €
sin IVA · 278,10 € con IVA

MXH6-30Z, compact precision slide, SMC

N.º cat.: MXH6-30Z

MXH6-30Z, compact precision slide, SMC

Bajo consulta
232,53 €
sin IVA · 281,36 € con IVA

MGPM20TF-40Z, SMC, compact cylinder, diameter 20 mm, stroke 40 mm

N.º cat.: MGPM20TF-40Z

MGPM20TF-40Z, SMC, compact cylinder, diameter 20 mm, stroke 40 mm. A guided cylinder combines linear motion with guidance against rotation and lateral load.

Bajo consulta
234,98 €
sin IVA · 284,33 € con IVA

C96SDB80-200C-XC68, Round cylinder with tie rods, SMC

N.º cat.: C96SDB80-200C-XC68

C96SDB80-200C-XC68, Round cylinder with tie rods, SMC

Bajo consulta
241,11 €
sin IVA · 291,74 € con IVA

MGPL16-10Z, SMC, compact cylinder, diameter 16 mm, stroke 10 mm

N.º cat.: MGPL16-10Z

MGPL16-10Z, SMC, compact cylinder, diameter 16 mm, stroke 10 mm. A guided cylinder combines linear motion with guidance against rotation and lateral load.

Bajo consulta
243,15 €
sin IVA · 294,22 € con IVA

MKB40TF-20RZ, rotary clamp cylinder, SMC

N.º cat.: MKB40TF-20RZ

MKB40TF-20RZ, rotary clamp cylinder, SMC

Bajo consulta
244,38 €
sin IVA · 295,70 € con IVA

MGPM25TF-175Z, SMC, guided pneumatic cylinder, diameter 25 mm, stroke 175 mm, magnet

N.º cat.: MGPM25TF-175Z

MGPM25TF-175Z, SMC, guided pneumatic cylinder, diameter 25 mm, stroke 175 mm, magnet. A guided cylinder combines linear motion with guidance against rotation and lateral load.

Bajo consulta
244,79 €
sin IVA · 296,20 € con IVA

DSBC-80-125-D3-PPSA-N3, Festo, pneumatic cylinder, 3656863

N.º cat.: DSBC-80-125-D3-PPSA-N3

DSBC-80-125-D3-PPSA-N3, Festo, pneumatic cylinder, 3656863. A pneumatic cylinder converts the energy of compressed air into linear motion.

Bajo consulta
250,10 €
sin IVA · 302,62 € con IVA

Los precios incluyen la tasa de reciclaje.

Pneumatic cylinders

A pneumatic cylinder converts the energy of compressed air into linear motion. It moves a part, presses a tool or operates a mechanism. The range includes, for example, the SMC CJP, CQ2, CQS, CD85, JCQ, MGP and MY1 series as well as Festo cylinders. In addition to actuators, there are GKM clevises and KJ rod ends; when ordering, therefore, distinguish the cylinder itself from its accessories.

Principle: pressure, area and direction of movement

Pressure acts on the effective area of the piston. In a double-acting cylinder, air is supplied alternately to both chambers and the opposite chamber is exhausted. A single-end rod reduces the area for retracting, so at the same overpressure the theoretical force is lower than when extending. This difference is also shown by SMC force table C95.

In the single-acting version with a return spring, air provides the working movement and the spring the return. When extending, its resistance must also be overcome. The design is illustrated by SMC CJP manual. Single-acting and double-acting versions therefore require a different assessment of the working and return movement.

Selection by task and space

First determine the required stroke, the direction of load and the force during the whole cycle. Then compare the diameter, permissible pressure, speed and temperature of the specific version. Check the dimensions in the retracted and extended position, the body mounting, the piston rod end and the space for connection. It is not enough to select only the same diameter and stroke.

A lateral load requires a separate assessment of the guide. For example, SMC MGP connects the cylinder with a guide structure. The force in the axis of movement is not the same as the permissible load on the guide. When replacing, compare the full order code and drawing; a similar series designation does not guarantee an identical version.

For an enquiry, prepare a description of the working cycle: what moves, from where to where, with what load and how often. For a replacement, add a photo of the nameplate and mounting. Write down the required properties and data not yet verified separately; this makes checking the offered version easier.

Our own model calculation: force difference

Let us consider a fictitious double-acting cylinder with a piston diameter D = 30 mm, a piston rod d = 12 mm and an overpressure p = 0.45 MPa. In the model, the opposite chamber has zero overpressure; we neglect friction and dynamics. Since 1 MPa = 1 N/mm², the area for extending A = πD²/4 is 706.9 mm² and the force F = pA approximately 318.1 N. For retracting, A = π(D² − d²)/4 = 593.8 mm² and F approximately 267.2 N.

The difference is 50.9 N. This is our own tutorial model, which does not define product selection or a guaranteed force. An actual design must take into account back pressure, friction, load and an operating reserve.

Mounting and commissioning

Before intervention, secure the load, disconnect the energy supplies and release residual pressure. Align the cylinder axis with the guide of the mechanism and verify free movement over the whole stroke. Protect the piston rod from scratches and the fittings from dirt. Set the speed gradually from a low value; also verify the permissible end-of-stroke energy. The procedure is detailed in SMC manual CQ2.

Diagnostics of irregular movement

In case of jerking or loss of force, check the pressure during operation, the patency of the supply, the speed setting, leaks and alignment. Compare the change in cycle time with the original state. Increasing pressure without finding the cause can mask a mechanical problem. In case of hard end-of-stroke impact, assess speed and load; separate shock absorbers select according to the specific energy requirement.

FAQ

Does the theoretical force value guarantee the actual force on the part?

No. It is the ideal result of pressure and area; the actual movement is also affected by back pressure and mechanical resistance.

Can a position sensor be added to every cylinder?

Verify compatibility for the specific cylinder, its equipment and mounting method. The range can be found among with magnetic sensors; the similarity of the slot alone is not enough.

Cookies en este sitio web

Necesitamos las cookies técnicas para que funcionen el carrito y el pedido — se usan siempre. Las cookies analíticas nos muestran qué páginas buscan las personas y dónde se pierden, y nos ayudan a mejorar la tienda. Solo las usaremos si nos lo permites. Más información en la política de tratamiento de datos.