Pneumatic cylinders

SMC and Festo pneumatic cylinders – ISO, compact, miniature, round, guided and rodless. Choose by bore, stroke, required force, mounting and position sensing.

Filtros
Encontrado 414 productos

MGPL20TF-50Z, SMC, pneumatic cylinder with linear guide, diameter 20 mm, stroke 50 mm, magnet

N.º cat.: MGPL20TF-50Z

MGPL20TF-50Z, SMC, pneumatic cylinder with linear guide, diameter 20 mm, stroke 50 mm, magnet. A guided cylinder combines linear motion with guidance against rotation and lateral load.

Bajo consulta
361,26 €
sin IVA · 437,12 € con IVA

MGPM40TF-40Z, SMC, compact cylinder, diameter 40 mm, stroke 40 mm

N.º cat.: MGPM40TF-40Z

MGPM40TF-40Z, SMC, compact cylinder, diameter 40 mm, stroke 40 mm. A guided cylinder combines linear motion with guidance against rotation and lateral load.

Bajo consulta
361,67 €
sin IVA · 437,62 € con IVA

MHZ2-10D, SMC, pneumatic cylinder

N.º cat.: MHZ2-10D

MHZ2-10D, SMC, pneumatic cylinder. A pneumatic gripper is used for gripping, holding and handling parts.

Bajo consulta
362,08 €
sin IVA · 438,11 € con IVA

MGPM32-150Z, SMC, compact cylinder, diameter 32 mm, stroke 150 mm

N.º cat.: MGPM32-150Z

MGPM32-150Z, SMC, compact cylinder, diameter 32 mm, stroke 150 mm. A guided cylinder combines linear motion with guidance against rotation and lateral load.

Bajo consulta
366,16 €
sin IVA · 443,06 € con IVA

DNC-63-250-PPV-A, cylinder, 163409, Festo

N.º cat.: DNC-63-250-PPV-A

DNC-63-250-PPV-A, cylinder, 163409, Festo

Bajo consulta
367,39 €
sin IVA · 444,54 € con IVA

MXS16-20, pneumatic cylinder, SMC

N.º cat.: MXS16-20

MXS16-20, pneumatic cylinder, SMC

Bajo consulta
371,88 €
sin IVA · 449,98 € con IVA

CDBA2B40-900-HN, SMC, round cylinder, double-acting, single-end rod, end position lock, diameter 40 mm, stroke 900 mm

N.º cat.: CDBA2B40-900-HN

CDBA2B40-900-HN, SMC, round cylinder, double-acting, single-end rod, end position lock, diameter 40 mm, stroke 900 mm. A pneumatic cylinder converts the energy of compressed air into linear motion.

Bajo consulta
378,01 €
sin IVA · 457,40 € con IVA

MGPM50TF-40Z, SMC, compact cylinder, diameter 50 mm, stroke 40 mm

N.º cat.: MGPM50TF-40Z

MGPM50TF-40Z, SMC, compact cylinder, diameter 50 mm, stroke 40 mm. A guided cylinder combines linear motion with guidance against rotation and lateral load.

Bajo consulta
378,01 €
sin IVA · 457,40 € con IVA

MGPA16-150Z, compact cylinder, SMC

N.º cat.: MGPA16-150Z

MGPA16-150Z, compact cylinder, SMC

Bajo consulta
396,36 €
sin IVA · 479,60 € con IVA

MGPL32TF-100Z, SMC, pneumatic cylinder with linear guide, diameter 32 mm, stroke 100 mm

N.º cat.: MGPL32TF-100Z

MGPL32TF-100Z, SMC, pneumatic cylinder with linear guide, diameter 32 mm, stroke 100 mm. A guided cylinder combines linear motion with guidance against rotation and lateral load.

Bajo consulta
426,36 €
sin IVA · 515,89 € con IVA

MXS12-50, SMC, compact precision slide

N.º cat.: MXS12-50

MXS12-50, SMC, compact precision slide. A linear slide or carriage combines linear motion with precise mechanical guidance.

Bajo consulta
428,28 €
sin IVA · 518,22 € con IVA

Rodless cylinder, MY3M16-500, diameter 16mm, stroke 500mm, , SMC

N.º cat.: MY3M16-500

Rodless cylinder, diameter 16mm, stroke 500mm, mechanical force transmission, slide bearing, adjustable cushioning

Bajo consulta
432,08 €
sin IVA · 522,82 € con IVA

CXSL20-80, SMC, dual-rod cylinder, linear guide, diameter 20 mm, stroke 80 mm

N.º cat.: CXSL20-80

CXSL20-80, SMC, dual-rod cylinder, linear guide, diameter 20 mm, stroke 80 mm. A guided cylinder combines linear motion with guidance against rotation and lateral load.

Bajo consulta
440,13 €
sin IVA · 532,56 € con IVA

MQMLD16H-15D, compact cylinder, SMC

N.º cat.: MQMLD16H-15D

compact cylinder; piston diameter: 16mm; stroke: 15; SMC

Bajo consulta
465,06 €
sin IVA · 562,72 € con IVA

MGPM50TF-150Z, SMC, compact cylinder, diameter 50 mm, stroke 150 mm

N.º cat.: MGPM50TF-150Z

MGPM50TF-150Z, SMC, compact cylinder, diameter 50 mm, stroke 150 mm. A guided cylinder combines linear motion with guidance against rotation and lateral load.

Bajo consulta
472,42 €
sin IVA · 571,62 € con IVA

MGPL32TF-125AZ, SMC, pneumatic cylinder with linear guide, diameter 32 mm, stroke 125 mm, magnet

N.º cat.: MGPL32TF-125AZ

MGPL32TF-125AZ, SMC, pneumatic cylinder with linear guide, diameter 32 mm, stroke 125 mm, magnet. A guided cylinder combines linear motion with guidance against rotation and lateral load.

Bajo consulta
474,05 €
sin IVA · 573,60 € con IVA

CP96SDB125-700, SMC, profile cylinder, diameter 125 mm, stroke 700 mm

N.º cat.: CP96SDB125-700

CP96SDB125-700, SMC, profile cylinder, diameter 125 mm, stroke 700 mm. An ISO/VDMA cylinder is a standardised pneumatic actuator for industrial machines and automation.

Bajo consulta
506,25 €
sin IVA · 612,57 € con IVA

CE1F12-25L, cylinder, SMC

N.º cat.: CE1F12-25L

cylinder; stroke: 25 mm; cable length: 3 m; SMC

Bajo consulta
507,56 €
sin IVA · 614,15 € con IVA

MGPM32-350Z-X742, SMC, compact cylinder, diameter 32 mm, stroke 350 mm

N.º cat.: MGPM32-350Z-X742

MGPM32-350Z-X742, SMC, compact cylinder, diameter 32 mm, stroke 350 mm. A guided cylinder combines linear motion with guidance against rotation and lateral load.

Bajo consulta
570,49 €
sin IVA · 690,30 € con IVA

MQQLB25-100D, compact cylinder, low friction, steel seal, SMC

N.º cat.: MQQLB25-100D

MQQLB25-100D, compact cylinder, low friction, steel seal, SMC

Bajo consulta
579,49 €
sin IVA · 701,18 € con IVA

MXS16-50ASR, compact precision slide, SMC

N.º cat.: MXS16-50ASR

MXS16-50ASR, compact precision slide, SMC

Bajo consulta
583,57 €
sin IVA · 706,12 € con IVA

Los precios incluyen la tasa de reciclaje.

Pneumatic cylinders

A pneumatic cylinder converts the energy of compressed air into linear motion. It moves a part, presses a tool or operates a mechanism. The range includes, for example, the SMC CJP, CQ2, CQS, CD85, JCQ, MGP and MY1 series as well as Festo cylinders. In addition to actuators, there are GKM clevises and KJ rod ends; when ordering, therefore, distinguish the cylinder itself from its accessories.

Principle: pressure, area and direction of movement

Pressure acts on the effective area of the piston. In a double-acting cylinder, air is supplied alternately to both chambers and the opposite chamber is exhausted. A single-end rod reduces the area for retracting, so at the same overpressure the theoretical force is lower than when extending. This difference is also shown by SMC force table C95.

In the single-acting version with a return spring, air provides the working movement and the spring the return. When extending, its resistance must also be overcome. The design is illustrated by SMC CJP manual. Single-acting and double-acting versions therefore require a different assessment of the working and return movement.

Selection by task and space

First determine the required stroke, the direction of load and the force during the whole cycle. Then compare the diameter, permissible pressure, speed and temperature of the specific version. Check the dimensions in the retracted and extended position, the body mounting, the piston rod end and the space for connection. It is not enough to select only the same diameter and stroke.

A lateral load requires a separate assessment of the guide. For example, SMC MGP connects the cylinder with a guide structure. The force in the axis of movement is not the same as the permissible load on the guide. When replacing, compare the full order code and drawing; a similar series designation does not guarantee an identical version.

For an enquiry, prepare a description of the working cycle: what moves, from where to where, with what load and how often. For a replacement, add a photo of the nameplate and mounting. Write down the required properties and data not yet verified separately; this makes checking the offered version easier.

Our own model calculation: force difference

Let us consider a fictitious double-acting cylinder with a piston diameter D = 30 mm, a piston rod d = 12 mm and an overpressure p = 0.45 MPa. In the model, the opposite chamber has zero overpressure; we neglect friction and dynamics. Since 1 MPa = 1 N/mm², the area for extending A = πD²/4 is 706.9 mm² and the force F = pA approximately 318.1 N. For retracting, A = π(D² − d²)/4 = 593.8 mm² and F approximately 267.2 N.

The difference is 50.9 N. This is our own tutorial model, which does not define product selection or a guaranteed force. An actual design must take into account back pressure, friction, load and an operating reserve.

Mounting and commissioning

Before intervention, secure the load, disconnect the energy supplies and release residual pressure. Align the cylinder axis with the guide of the mechanism and verify free movement over the whole stroke. Protect the piston rod from scratches and the fittings from dirt. Set the speed gradually from a low value; also verify the permissible end-of-stroke energy. The procedure is detailed in SMC manual CQ2.

Diagnostics of irregular movement

In case of jerking or loss of force, check the pressure during operation, the patency of the supply, the speed setting, leaks and alignment. Compare the change in cycle time with the original state. Increasing pressure without finding the cause can mask a mechanical problem. In case of hard end-of-stroke impact, assess speed and load; separate shock absorbers select according to the specific energy requirement.

FAQ

Does the theoretical force value guarantee the actual force on the part?

No. It is the ideal result of pressure and area; the actual movement is also affected by back pressure and mechanical resistance.

Can a position sensor be added to every cylinder?

Verify compatibility for the specific cylinder, its equipment and mounting method. The range can be found among with magnetic sensors; the similarity of the slot alone is not enough.

Cookies en este sitio web

Necesitamos las cookies técnicas para que funcionen el carrito y el pedido — se usan siempre. Las cookies analíticas nos muestran qué páginas buscan las personas y dónde se pierden, y nos ayudan a mejorar la tienda. Solo las usaremos si nos lo permites. Más información en la política de tratamiento de datos.