6ES7193-6BP00-0DA1, Siemens, BaseUnit / terminal base, push-in terminal

6ES7193-6BP00-0DA1, Siemens, BaseUnit / terminal base, push-in terminal

6ES7193-6BP00-0DA1 is a BaseUnit / terminal base made by Siemens. This page describes a specific order variant, not just a general product line.

In industrial automation the exact order code is essential: similar-looking variants may differ in contacts, operating element, degree of protection, electrical parameters or compatibility. Catalogue parameters, recommended use and checkpoints before ordering are therefore listed separately below.

Operating principle

A component of the ET 200SP system forms part of a modular distributed I/O station and provides a specific input, output, communication or connection function.

Typical applications

Used in distributed I/O stations for connecting field signals and communicating with the PLC.

Technical specifications

Mounting and wiring

Check the correct BaseUnit type, interface and module position in the assembly. For F-modules (safety), the PROFIsafe configuration must also match.

Before commissioning, check the mechanical operation, electrical function and secure fastening. When replacing an original part, also compare the orientation of the cable, connector or actuator and the available mounting space.

How to choose the right variant

Compare the complete order code, module type, number of channels, power supply, BaseUnit and the required communication or safety functions.

Compatibility and replacement

When replacing, compare the original order code, contact function, mechanical design, degree of protection and electrical load. For accessories, the exact compatible series must also be verified. If a parameter is not stated in the available source data, it is not assumed in this description.

Operation, inspection and service

Monitor the module and connector status in the PLC diagnostics. When replacing, use an exactly compatible variant and check the hardware project.

After replacement or a change of mechanical setting, always carry out a functional test in the real working range of the machine. For elements that affect stopping or interlocking of the machine, also test the related control logic.

Source of technical data

The technical data in this description are based on the e-shop source export. The EMAS catalogue does not cover this product, so no unverified parameters have been added.

The catalogue and source text was used for the parameters of the specific variant. Technical values not documented in the available sources are not added to the description.

FAQ

What kind of product is 6ES7193-6BP00-0DA1?
6ES7193-6BP00-0DA1 is a BaseUnit / terminal base made by Siemens. The exact design and parameters of this variant are listed in the technical table.

How to verify that 6ES7193-6BP00-0DA1 is the correct variant?
Compare the complete order number, product function, mechanical design, electrical parameters and compatibility with the specific assembly.

Why is a similar appearance or name not enough?
For industrial components, a small change in the code can mean a different contact, actuator, voltage, connector or a different function.

What should be checked before ordering?
Order code, contacts, mechanical design, degree of protection, electrical parameters and connection method. For accessories also the compatible series.

How to proceed when replacing the original part?
First copy the complete code of the original part. Then compare the function, dimensions, wiring and mechanical method of operation.

Can the product be used in another application?
Yes, but only if the technical and mechanical conditions match. The same product line by itself does not guarantee interchangeability.

Is this part a component of ET 200SP?
Yes, the source export assigns it to the SIMATIC ET 200SP. system

How to verify a compatible BaseUnit?
Use the complete order code of the module and compare the required BaseUnit type in the hardware configuration.

What to check in TIA Portal?
Module type, hardware version, addressing and any PROFIsafe safety parameters.

Can the module be replaced with a similar code?
Only after verifying the parameters and hardware configuration. A similar code may not be fully interchangeable.