iE110-PL030, iE, safety rope, rope, price per 1m
- Our price excl. VAT
- 1,76 €
- incl. VAT 21 %
- 2,13 €
Description
iE110-PL030, iE, safety rope, rope, price per 1m
iE110-PL030 is a safety rope made by iE. This page describes a specific order variant, not just a general product line.
In industrial automation the exact order code is essential: similar-looking variants may differ in contacts, operating element, degree of protection, electrical parameters or compatibility. Catalogue parameters, recommended use and checkpoints before ordering are therefore listed separately below.
Operating principle
The accessory complements a rope pull safety system and provides mechanical guidance or anchoring of the rope.
Typical applications
Used for installation and service of rope pull safety switches along conveyors or process equipment.
Technical specifications
| Order code | iE110-PL030 |
|---|---|
| Manufacturer | iE |
| Product type | safety rope |
| System / series | rope pull safety switch iE110 |
| Length / reach | 1 m |
Mounting and wiring
Observe the rope guidance, tension and fastening according to the specific system. The accessory must be installed so that it does not prevent the safety signal from being triggered.
Before commissioning, check the mechanical operation, electrical function and secure fastening. When replacing an original part, also compare the orientation of the cable, connector or actuator and the available mounting space.
How to choose the right variant
Check the size, thread or length and compatibility with the system iE110.
Compatibility and replacement
When replacing, compare the original order code, contact function, mechanical design, degree of protection and electrical load. For accessories, the exact compatible series must also be verified. If a parameter is not stated in the available source data, it is not assumed in this description.
Operation, inspection and service
Check for corrosion, loosening of anchor points and changes in rope tension.
After replacement or a change of mechanical setting, always carry out a functional test in the real working range of the machine. For elements that affect stopping or interlocking of the machine, also test the related control logic.
Source of technical data
The technical data in this description are based on the e-shop source export. The EMAS catalogue does not cover this product, so no unverified parameters have been added.
The catalogue and source text was used for the parameters of the specific variant. Technical values not documented in the available sources are not added to the description.
FAQ
What kind of product is iE110-PL030?
iE110-PL030 is a safety rope made by iE. The exact design and parameters of this variant are listed in the technical table.
How to verify that iE110-PL030 is the correct variant?
Compare the complete order number, product function, mechanical design, electrical parameters and compatibility with the specific assembly.
Why is a similar appearance or name not enough?
For industrial components, a small change in the code can mean a different contact, actuator, voltage, connector or a different function.
What should be checked before ordering?
Order code, contacts, mechanical design, degree of protection, electrical parameters and connection method. For accessories also the compatible series.
How to proceed when replacing the original part?
First copy the complete code of the original part. Then compare the function, dimensions, wiring and mechanical method of operation.
Can the product be used in another application?
Yes, but only if the technical and mechanical conditions match. The same product line by itself does not guarantee interchangeability.
How to install the product correctly?
Observe the mechanical design, direction of action and electrical wiring according to the specific assembly.
How often should the product be checked?
The interval depends on the operating intensity and environment. Always check its condition during regular machine servicing.
What to do if compatibility is unclear?
Compare the order number and documentation of the original assembly; do not select by name alone.
Where are the source parameters stated?
For EMAS products, the technical data were added from the EMAS Product Overview catalogue edition 57 and from the e-shop source export.
Technical parameters
| Objednací kód | iE110-PL030 |
|---|---|
| Výrobce | TECHNOLINE |
Ask about this product
Related products
L51K13HUM111, EMAS, L51, safety limit switch, metal body, rope / ring actuator, 1 NC + 1 NO, snap action, IP65
L51K13HUM111
12,15 €
excl. VAT · 14,70 € incl. VAT
L52K23HUM111, EMAS, L52, safety limit switch, metal body, rope / ring actuator, 1 NC + 1 NO, slow action, IP65
L52K23HUM111
12,27 €
excl. VAT · 14,85 € incl. VAT
L51K23HUM112, EMAS, L51, safety limit switch, metal body, rope / ring actuator with reset, 1 NC + 1 NO, slow action, IP65
L51K23HUM112
16,83 €
excl. VAT · 20,36 € incl. VAT
L52K23HUM112, EMAS, L52, safety limit switch, metal body, rope / ring actuator with reset, 1 NC + 1 NO, slow action, IP65
L52K23HUM112
20,11 €
excl. VAT · 24,33 € incl. VAT
ie110-peb, iE, mounting eye / bolt, eye bolt, M8x1, 5mm, Second-hand
ie110-peb
3,90 €
excl. VAT · 4,71 € incl. VAT