UNDK 30N1712/S14, BAUMER, ultrasonic proximity sensor, 60–400mm, NPN, normally open (NO), connector M12, IP67

UNDK 30N1712/S14, BAUMER, ultrasonic proximity sensor, 60–400mm, NPN, normally open (NO), connector M12, IP67

UNDK 30N1712/S14 is an industrial Baumer ultrasonic sensor for non-contact evaluation of the presence of an object. Detection distance 60–400mm. Switching output NPN, normally open (NO); connection connector M12.

Technical parameters – overview

Function and suitable use

Suitable applications include checking the presence of parts on a conveyor, the position of an object in a machine or non-contact monitoring of a limit distance. Before choosing, compare the working range, output circuit and geometry of the detected target.

• The manufacturer states synchronisation for this model: yes. When several sensors operate simultaneously, verify the recommended wiring.
• Stated multiplex version: on request. The setting must correspond to the specific application.

How to choose the right variant

• Range: 60–400mm; design the target position within the declared interval, not on the basis of the series designation.
• Output: NPN, normally open (NO); check compatibility with the control unit input.
• Mounting: rectangular version; observe the dimensions and recommended fixing.
• Wiring: The M12 connector is suitable for detachable machine wiring; verify the coding and number of contacts corresponding to this sensor.
• Environment: protection IP67; verify suitability for specific contamination, temperatures or chemical influences according to the operating conditions.

Difference from a related model

Compared with the variant UNDK 30N1712 this model differs in the parameter connection: zde connector M12, u varianty UNDK 30N1712 cable 2m. This is decisive when choosing the correct version.

Most frequent selection questions

What determines the minimum detection distance?

The near limit of the working range stated by the manufacturer is decisive; objects outside this range cannot automatically be considered reliably detectable.

What connection is needed?

For this model, the stated connection is connector M12. The mating part and pinout must be verified according to the manufacturer's version.

What output does this variant have?

The output circuit is NPN, normally open (NO). Before connecting, compare it with the input type of the PLC or other control unit.