Phone +420 774 723 123 Cart · 0 · empty
OUR TIP
DB080803-0-DN, LANBAO, sensor distribution box M8, 8 ports 3pin, D-SUB, NPN

DB080803-0-DN, LANBAO, sensor distribution box M8, 8 ports 3pin, D-SUB, NPN

Cat. no.: DB080803-0-DN
Manufacturer: Lanbao
On request
Our price excl. VAT
58,40 €
incl. VAT 21 %
70,66 €
Recycling fee 5-32-1 (0,0409 €/kg) 0,01 €
Weight 0.32 kg
HS Code (Taric) 85444290
Country of origin CN

Description

DB080803-0-DN is a sensor distribution box with 8 ports M8 in the 3-pin version. The feed is provided by a D-SUB connector with gold-plated contacts – you replace the box by unscrewing one connector. The box is in the NPN version with NO output. The yellow LED at each socket shows the channel status without you having to go to the PLC.

When to choose this variant

  • Quick replacement of the whole box. Unplug the D-SUB and fit a new one – without disconnecting the terminal block and without shutting down the control cabinet.
  • Selectable route length. The distance to the control cabinet is determined by the extension cable, not the box, so one type covers more machines.
  • NPN version for machines with negative logic – typically Asian production lines and retrofits of older equipment.
  • Eight M8 ports with a spacing of 14 mm. The highest connection density – for stations fitted with miniature photoelectric and inductive sensors.
  • Degree of protection IP67. Potted interior, gold-plated contacts and an FKM O-ring – withstands dust, washdown and coolant emulsion. The condition is that every port is either occupied or closed with a cap.
  • Current rating 2 A per port, 8 A in total. Enough even for fitting all ports with inductive sensors with higher consumption.

Technical specifications

Order code DB080803-0-DN
Manufacturer Lanbao
Type passive distribution box for sensors
Number of ports 8
Port connector M8, 3 pins, female
Port thread M8×1
Feed cable D-SUB connector (gold-plated brass)
Output logic NPN
Output function NO (normally open)
Indication yellow LED on each port
Supply voltage 10…30 V DC
Rated current per port 2 A
Total current 8 A
Contact resistance ≤ 8 mΩ
Operating temperature −20 … +80 °C
Socket material phosphor bronze, gold-plated
Nut brass, nickel-plated
Sealing O-ring FKM
Base PA66 + GF (glass-filled polyamide)
Potting epoxy resin
Dimensions 98 × 45 × 20.5 mm
Mounting holes 2× ø4 mm, spacing 88 mm
Port spacing 14 mm
IP rating IP67 (with occupied or capped ports)
Country of origin China

Parameters according to the Lanbao manufacturer's catalogue (Industrial connection system). The material and length of the feed cable can be customised on request.

D-SUB connector assignment

The signals of all eight ports, the supply and the common conductor are brought out to a D-SUB connector with gold-plated contacts. The assignment of the individual pins can be found in the wiring diagram in the datasheet – the connection to the control cabinet is made with an extension cable with a matching mating connector, so you choose the route length independently of the box.

What needs to be ordered additionally

The box is supplied without cables to the sensors. For full occupation, order 8 cables with M8 connector / 3 pins, male. To connect to the sockets of the distribution box, use the following Lanbao male cables and connectors:

Type Version 2 m 5 m
PVC cable Straight QE8-W3F2 QE8-W3F5
PVC cable Angled QE8-W3G2 QE8-W3G5
PUR cable Straight QE8-W3F2-U QE8-W3F5-U
PUR cable Angled QE8-W3G2-U QE8-W3G5-U
Connector without cable Straight QE08-W3F
Connector without cable Angled QE08-W3G

The suffix -U denotes a PUR jacket, without it the cable is PVC; F is the straight and G the angled version. Close unused ports with a suitable cap to maintain the box's degree of protection.

Frequently asked questions

What happens to the degree of protection if I leave a port unused?

IP67 protection only applies if every socket is either fitted with a connector or closed with a cap. An open port is a path for dust and moisture and reduces the protection of the whole box.

Does the box contain any electronics?

No. The box is passive; the ports are only connected to the feed cable and supplemented with LED indication. Each channel therefore needs its own PLC input. If you want to transmit all signals over one network cable, you need an active I/O module with a fieldbus.

What is the difference between the PVC and PUR variants?

PVC is cheaper and sufficient for a fixed route. PUR withstands repeated bending, oil and mechanical abrasion, so it belongs in drag chains and on moving machine parts.

Technical parameters

Objednací kódDB080803-0-DN
VýrobceLanbao
DiameterM8
Number of pins3
Cable lengthD-SUB
Number of ports8
Output logicNPN

Downloads

Ask about this product

Ask us about technical parameters, compatibility with your equipment, availability or a price for larger quantities. It helps if you tell us what application you need the product for — if it does not fit, we will recommend a more suitable type.

Kód k opsání. Pokud ho nepřečtete, klikněte na Načíst nový kód.
The question relates to product DB080803-0-DN

By sending you agree to the processing of the data provided for the purpose of handling your question. We do not pass the data on to third parties.

Related products

Cookies on this website

We need technical cookies for the cart and checkout to work — these are always used. Analytics cookies show us which pages people look for and where they get lost, and help us improve the shop. We only use them if you allow it. More in the data processing policy.