DB080803-2-03N, LANBAO, sensor distribution box M8, 8 ports 3pin, PUR 3m, NPN

DB080803-2-03N is a sensor distribution box with 8 ports M8 in the 3-pin version. The feed is a permanently attached 10-core PUR cable 3 m long: brown (+), blue (−) and eight signal wires – green, white, grey, yellow, pink, red, violet and black. The output is NPN with NO switching function. Each port has its own yellow LED, so sensor switching is visible directly on the machine.

When to choose this variant

• PUR jacket for moving installation. Withstands repeated bending in a drag chain, oil and coolant emulsion, and resists abrasion better than PVC.
• Cable 3 m for a box placed close to the control cabinet – no excess that would have to be folded into the duct.
• NPN version for machines with negative logic – typically Asian production lines and retrofits of older equipment.
• Eight M8 ports with a spacing of 14 mm. The highest connection density – for stations fitted with miniature photoelectric and inductive sensors.
• Degree of protection IP67. Potted interior, gold-plated contacts and an FKM O-ring – withstands dust, washdown and coolant emulsion. The condition is that every port is either occupied or closed with a cap.
• Current rating 2 A per port, 8 A in total. Enough even for fitting all ports with inductive sensors with higher consumption.

Technical specifications

Parameters according to the Lanbao manufacturer's catalogue (Industrial connection system). The material and length of the feed cable can be customised on request.

Feed cable wire assignment

The 3 m PUR feed cable has 10 cores. The colours correspond to the individual ports as follows:

In the NPN version, the LED is connected to supply plus. Port numbering corresponds to the print on the box cover.

What needs to be ordered additionally

The box is supplied without cables to the sensors. For full occupation, order 8 cables with M8 connector / 3 pins, male. To connect to the sockets of the distribution box, use the following Lanbao male cables and connectors:

The suffix -U denotes a PUR jacket, without it the cable is PVC; F is the straight and G the angled version. Close unused ports with a suitable cap to maintain the box's degree of protection.

Frequently asked questions

How do I find out that a sensor is not switching?

By the yellow LED at the corresponding port. It lights up when the sensor is active, so you can find the fault directly on the machine without searching through the PLC inputs.

What is the operating temperature?

From −20 to +80 °C. The base is made of glass-filled polyamide PA66 the interior is potted with epoxy resin and the seal is an FKM O-ring.

What is the degree of protection of this distribution box?

IP67. This means complete protection against dust and temporary immersion in water to a depth of one metre. This applies to the box with occupied or capped ports.