6ED1052-2FB08-0BA1, Siemens, LOGO! 230RCEo, 4 relay, without display

6ED1052-2FB08-0BA1 Siemens LOGO! 230RCEo – 4 relay, without display

6ED1052-2FB08-0BA1 is an older-generation Siemens LOGO! unit for older LOGO! generations (0BA1).

Siemens LOGO! 230RCEo 6ED1052-2FB08-0BA1 is a control unit without display for a 115/230 V AC/DC supply. It offers 8 digital inputs and 4 relay outputs.

Which assembly it belongs to

The unit belongs to Siemens LOGO! 8 assemblies and is suitable where a local display is not needed. Choose expansions of the same generation and supply. The 230RCEo basic module is supplied directly from 115/230 V AC/DC, so do not add a separate 24V power supply for it.

Typical applications

Control of lighting, pumps, ventilation, heating, gates and smaller machines operated from a remote interface or switchboard.

What to watch out for when choosing

Verify the catalogue number, supply, relay output load and expansion compatibility. For an older part, we offer help with cross-referencing and program conversion.

Cross-referencing older parts

If you are dealing with the replacement of this older part, TECHNOLINE offers help with cross-referencing and choosing a current solution. Prepare the full order number, a photo of the rating plate, a description of the wiring and an available program backup. Details can be found at https://eshop.technoline.cz/pretypovani-a-vyber-dilu. A replacement cannot be confirmed without checking the specific application.

Technical specifications

Related components of the assembly

In the design, check the supply, input and output type, software and generation compatibility. Recommended related items:

• 6ED1052-1MD08-0BA3 – LOGO! 9 control module
• 6ED1058-0BA08-0YA3 – LOGO! Soft Comfort V9

Official Siemens documentation

The documents open directly in the manufacturer's sources and relate to the order number 6ED1052-2FB08-0BA1.

• Datasheet PDF
• Manuals and operating documentation
• Certificates and declarations
• Product page in SiePortal

Frequently asked questions

Which generation does the product belong to?

Order number 6ED1052-2FB08-0BA1 is listed in this catalogue as older LOGO! generation (0BA1). Before combining different generations, verify the compatibility of the whole assembly.

How do I verify the correct variant?

Compare the full order number, supply, number and type of inputs and outputs and the required interface. A similar name or appearance of the product is not enough.

Can Siemens LOGO! be replaced by a Rievtech product?

Rievtech can be a suitable alternative for a new installation or a complete rebuild. However, it is not a direct one-to-one replacement; the supply, wiring, program, communication and expansion must be verified.

Alternative Rievtech solution

For a new application, we can also design a Rievtech control solution. Send us the application parameters and we will compare a suitable assembly without claiming unverified direct compatibility.