IB180206, IPF, extended-range inductive sensor, M18 × 50mm, Sn 12mm, 10-30V, PNP, NC, cable 2m, 3 wires

IB180206 – IPF extended-range inductive sensor

IB180206 IPF is an extended-range inductive sensor designed for applications requiring a longer sensing distance or a larger mounting margin. This variant has: design M18, overall length 50 mm, rated sensing distance 12 mm, supply 10–30 V, PNP output with NC contact, connection: cable 2m, 3 wires.

Key features

• Sensing distance 12 mm – rated value according to the manufacturer's catalogue data.
• Output PNP / NC – electrical design of this variant.
• Supply 10–30 V – permissible supply voltage range.
• Connection: Cable 2m, 3 wires – electrical connection type of this variant.
• Ambient temperature -25–70°C – permissible temperature range according to the manufacturer.

How an extended-range inductive sensor works

The active face of the sensor generates an electromagnetic field. When a metal object approaches it, the resulting eddy currents change the state of the oscillator and the electronics evaluate this change at the output. Detection takes place without mechanical contact between the sensor and the target.

Correction factors for different metals

The rated sensing distance applies to the manufacturer's reference target. For another material, the approximate range is determined as Sn × the correction factor given below. The values are taken from the catalogue data of this model.

Technical specifications IB180206

Electrical connection IB180206

IB180206 uses the connection cable 2m, 3 wires. The manufacturer states the number of wires: 3. Before connecting, compare the actual wiring with the diagram in the manufacturer's datasheet; pin and wire colour assignments should not be derived from the connector type alone.

Typical applications IB180206

• detection of metal parts with a larger mounting margin
• position checking over a larger working gap
• replacing a standard sensor where its range is not sufficient

How to choose the right variant

• Sensing distance 12 mm: this is the rated catalogue value. When designing, take into account the material and size of the target as well as the mounting conditions.
• PNP output: must match the input type of the control system.
• NC contact: the contact logic is normally closed.
• Connection: Cable 2m, 3 wires: the mating connector or cable must match the data in the datasheet.

Frequently asked questions about IB180206

What is IB180206?

IB180206 is an extended-range inductive sensor made by IPF.

What is the sensing distance of IB180206?

The rated sensing distance is 12 mm.

What output does IB180206 have?

The electrical design is PNP / NC.

How is IB180206 connected?

The manufacturer specifies the connection as cable 2m, 3 wires. Check the exact wiring in the datasheet.

What supply does IB180206 require?

The catalogue supply range is 10–30 V.