IB040206, IPF, extended-range inductive sensor, M4, Sn 1mm, 10-30VDC, PNP, NC, PUR cable 2 m

IB040206 – IPF extended-range inductive sensor

IB040206 IPF is an extended-range inductive sensor designed for applications requiring a longer sensing distance or a larger mounting margin. This variant has: design M4, rated sensing distance 1 mm, supply 10–30 V DC, PNP output with NC contact, connection: PUR cable 2 m.

Key features

• Sensing distance 1 mm – rated value according to the manufacturer's catalogue data.
• Output PNP / NC – electrical design of this variant.
• Supply 10–30 V DC – permissible supply voltage range.
• Flush mounting – design of the active face according to the manufacturer.
• Connection: PUR cable 2 m – electrical connection type of this variant.
• Ambient temperature -25 °C–70 °C – permissible temperature range according to the manufacturer.

How an extended-range inductive sensor works

The active face of the sensor generates an electromagnetic field. When a metal object approaches it, the resulting eddy currents change the state of the oscillator and the electronics evaluate this change at the output. Detection takes place without mechanical contact between the sensor and the target.

Correction factors for different metals

The rated sensing distance applies to the manufacturer's reference target. For another material, the approximate range is determined as Sn × the correction factor given below. The values are taken from the catalogue data of this model.

Technical specifications IB040206

Electrical connection IB040206

IB040206 uses the connection PUR cable 2 m. Before connecting, compare the actual wiring with the diagram in the manufacturer's datasheet; pin and wire colour assignments should not be derived from the connector type alone.

Mounting IB040206

The active face is designed for flush mounting. The sensor can be installed in a metal surrounding according to the manufacturer's installation drawing.

Typical applications IB040206

• detection of metal parts with a larger mounting margin
• position checking over a larger working gap
• replacing a standard sensor where its range is not sufficient

How to choose the right variant

• Sensing distance 1 mm: this is the rated catalogue value. When designing, take into account the material and size of the target as well as the mounting conditions.
• Flush version: check that the installation method matches the manufacturer's installation drawing.
• PNP output: must match the input type of the control system.
• NC contact: the contact logic is normally closed.
• Connection: PUR cable 2 m: the mating connector or cable must match the data in the datasheet.

Frequently asked questions about IB040206

What is IB040206?

IB040206 is an extended-range inductive sensor made by IPF.

What is the sensing distance of IB040206?

The rated sensing distance is 1 mm.

What output does IB040206 have?

The electrical design is PNP / NC.

How is IB040206 connected?

The manufacturer specifies the connection as PUR cable 2 m. Check the exact wiring in the datasheet.

What supply does IB040206 require?

The catalogue supply range is 10–30 V DC.