KINCO control system K306-24DT (14DI, 10DO transistor, 24V DC)

!!NOTE - FREE SOFTWARE!!

CPU processor: 16-bit industrial
Logic operation execution time: <0.5μS
Word operation time: <48μS
Integer arithmetic operation time: <65μS
Real-number arithmetic operation time: <150μS
Digital inputs: 14 DC24V
Digital outputs: 10 DC24V transistor
Program memory FRAM: 8KB/about 1.200 steps
Program backup without the need for a battery
variable memory (V area): 4KB
system variable memory (SM area): 300 bytes
Internal memory (M area): 32 bytes

Supported programming languages: Ladder Drawing (LD), Instruction List (IL)
Instruction set: 55; expansion instructions: 252
Password protection: yes
Maximum number of digital I/O: 64 in total (64 DI and 64 DO);
Analogue modules: 16 in total (16 AI and 16 AO respectively)
Counters: 128
  - counting up, down
  - rozsah -32768~32767
  - counter retention: yes

Timers: 128
  - 1 ms 4x
  - 10 ms 16x
  - 100 ms 108x

High-speed counters
  - single-phase counters: 6, with a maximum frequency of 30 KHz
  - dual-phase counters: 4, with a maximum frequency of 20 KHz

Pulse output
  -2x, PTO (Pulse Train Output)/PWM (Pulse Width Modulation output);
  - Maximum output frequency: 20 KHz

Analogue potentiometers
  - 2x, 10-bit resolution, value stored in internal memory

Interrupts
  - timer interrupt: T2/T3, 1ms resolution
  - edge interrupt: 4, falling or rising edge
  - high-speed counter interrupt

Real-time clock: yes, with an error of less than 2 minutes per month at 25°C
Number of connectable modules: 4
Communication port: RS232 or RS485
Port modes: Programming, Modbus-RTU (slave), Free protocol
Connection to COM Port RS232/RS485: PC (for programming), HMI, Modbus devices (readers etc.)
Supply voltage: DC24V±20%
Sensor supply: DC24V, max. 500 mA
Dimensions (L*W*H): 125x114x70mm