CM707DJ41, EMAS, four-way joystick without latching

CM707DJ41, EMAS, four-way joystick without latching

CM707DJ41 is a joystick made by EMAS. Important data of this variant include 230V AC, 4, spring return, 22 mm.

The description is based on specific source data, not just on general text for the whole category. For industrial control devices, a single character in the order code can mean a different contact, colour, voltage, return or mechanical design.

Function and principle

A joystick is used for manual directional or multi-state machine control. Typical applications are manipulators, lifting equipment, service control panels and auxiliary movements. In the design, the number of positions, latching or lever return and the number of electrical contacts are decisive.

Typical applications

The product is intended for control panels, switchboards, machines and process equipment according to its specific function. When designing the application, the working environment, operating frequency, mechanical stress and electrical parameters of the connected circuit must be taken into account.

Technical specifications

Mounting and wiring

Fasten the control device in the panel so that it does not rotate in the mounting hole during use. Fit the contact blocks in the required configuration and, after wiring, check the logic of all positions, the return and the latching.

How to choose the right variant

Compare the 2/4-position version, latching or return and the contact blocks.

Compatibility and connection

For modular control devices, check the compatibility of the head, contact blocks, light block, holder and accessories. For complete devices, check the mounting dimension and electrical wiring. When replacing an original part, use the complete order code as the basis.

Operation, inspection and service

After mounting, carry out a functional test of all positions and contacts. During regular maintenance, check the mechanical fastening, connection condition and any wear of the operating mechanism. When replacing, always note the exact order code of the original part.

Source of technical data

The product was compared with the catalogue EMAS Product Overview, Edition 57, 30.06.2026, page 13.

If a parameter is not listed in the table, it was not clearly documented in the available sources and has not been assumed in the description.

FAQ

What kind of product is CM707DJ41?
CM707DJ41 is a joystick made by EMAS. The exact design is summarised in the technical table. The catalogue entry was found on page 13 of the EMAS catalogue Edition 57.

How to verify the correct variant of CM707DJ41?
Compare the complete order code, mechanical design and all parameters in the table. Similar series may differ in contacts, return, voltage or mounting.

What should be checked before ordering?
Compare the 2/4-position version, latching or return and the contact blocks.

How to mount the product correctly?
Fasten the control device in the panel so that it does not rotate in the mounting hole during use. Fit the contact blocks in the required configuration and, after wiring, check the logic of all positions, the return and the latching.

Why is selecting by photo alone not enough?
Several electrically different variants may look the same. The order code and catalogue specification are decisive.

How to check the electrical wiring?
Check the NO/NC contacts, rated voltage and connection type according to the specific variant. Carry out a functional test after mounting.

Can another variant of the same series be used?
Yes, but only if both the mechanical fastening and the electrical function match. Confirm the interchange using the parameters of both order codes.

What is important during service or replacement?
Note the exact order code of the original part, the contact configuration and the mounting method. This significantly reduces the risk of an incorrect replacement.

What data is the description based on?
For EMAS products, data from the EMAS Product Overview Edition 57 (30.06.2026) and data from the TECHNOLINE source export are used. For other manufacturers, only documented data from the export.

What to do if a parameter is not listed in the table?
The parameter was not clearly documented in the available sources. In that case, verify it in the documentation of the specific product before designing the application.