IC121106, IPF, inductive sensor Factor 1, length 50mm, 10V-30V, NO, cable 2 m

IC121106 – IPF Factor 1 inductive sensor

IC121106 IPF is a Factor 1 inductive sensor designed for detecting different metals with the correction factor specified by the manufacturer. This variant has: overall length 50 mm, supply 10 V-30 V, connection: cable 2 m.

Key features

• Output NO – electrical design of this variant.
• Supply 10 V-30 V – permissible supply voltage range.
• Flush mounting – design of the active face according to the manufacturer.
• Connection: Cable 2 m – electrical connection type of this variant.

How a Factor 1 inductive sensor works

The active face of the sensor generates an electromagnetic field. When a metal object approaches it, the resulting eddy currents change the state of the oscillator and the electronics evaluate this change at the output. Detection takes place without mechanical contact between the sensor and the target.

Correction factors for different metals

The rated sensing distance applies to the manufacturer's reference target. For another material, the approximate range is determined as Sn × the correction factor given below. The values are taken from the catalogue data of this model.

Technical specifications IC121106

Electrical connection IC121106

IC121106 uses the connection cable 2 m. Before connecting, compare the actual wiring with the diagram in the manufacturer's datasheet; pin and wire colour assignments should not be derived from the connector type alone.

Mounting IC121106

The active face is designed for flush mounting. The sensor can be installed in a metal surrounding according to the manufacturer's installation drawing.

Typical applications IC121106

• detection of different metal materials
• applications where the material of the metal target alternates

How to choose the right variant

• Flush version: check that the installation method matches the manufacturer's installation drawing.
• NO contact: the output changes state when the target is detected.
• Connection: Cable 2 m: the mating connector or cable must match the data in the datasheet.

Frequently asked questions about IC121106

What is IC121106?

IC121106 is a Factor 1 inductive sensor made by IPF.

What output does IC121106 have?

The electrical design is NO.

How is IC121106 connected?

The manufacturer specifies the connection as cable 2 m. Check the exact wiring in the datasheet.

What supply does IC121106 require?

The catalogue supply range is 10 V-30 V.