UR18.PA0.2-GP1J.9SF, BAUMER, ultrasonic proximity sensor, 20–1000mm, push-pull, connector M12, 5 pins, IO-Link, IP69

UR18.PA0.2-GP1J.9SF, BAUMER, ultrasonic proximity sensor, 20–1000mm, push-pull, connector M12, 5 pins, IO-Link, IP69

UR18.PA0.2-GP1J.9SF is an industrial Baumer ultrasonic sensor for non-contact evaluation of the presence of an object. Detection distance 20–1000mm. Switching output push-pull; connection connector M12, 5 pins.

Technical parameters – overview

Function and suitable use

Suitable applications include checking the presence of parts on a conveyor, the position of an object in a machine or non-contact monitoring of a limit distance. Before choosing, compare the working range, output circuit and geometry of the detected target.

• The declared setting and communication options can be used via IO-Link; when choosing, verify a compatible IO-Link master and connector wiring.

How to choose the right variant

• Range: 20–1000mm; design the target position within the declared interval, not on the basis of the series designation.
• Output: push-pull; check compatibility with the control unit input.
• Mounting: cylindrical version; observe the dimensions and recommended fixing.
• Wiring: The M12 connector is suitable for detachable machine wiring; verify the coding and number of contacts corresponding to this sensor.
• Environment: protection IP69; verify suitability for specific contamination, temperatures or chemical influences according to the operating conditions.

Most frequent selection questions

What determines the minimum detection distance?

The near limit of the working range stated by the manufacturer is decisive; objects outside this range cannot automatically be considered reliably detectable.

What connection is needed?

For this model, the stated connection is connector M12, 5 pins. The mating part and pinout must be verified according to the manufacturer's version.

What output does this variant have?

The output circuit is push-pull. Before connecting, compare it with the input type of the PLC or other control unit.