IN184131, IPF, inductive sensor, M18, Sn 10mm, DC 2-wire, Connector, 3 pins

IN184131 – IPF inductive sensor

IN184131 IPF is an inductive sensor designed for non-contact detection of the position and presence of metal objects. This variant has: design M18, rated sensing distance 10 mm, output DC 2-wire, connection: connector, 3 pins.

Key features

• Sensing distance 10 mm – rated value according to the manufacturer's catalogue data.
• Output DC 2-wire – electrical design of this variant.
• Connection: Connector, 3 pins – electrical connection type of this variant.
• Degree of protection IP67 – degree of protection stated in the catalogue data.

How an inductive sensor works

The active face of the sensor generates an electromagnetic field. When a metal object approaches it, the resulting eddy currents change the state of the oscillator and the electronics evaluate this change at the output. Detection takes place without mechanical contact between the sensor and the target.

Correction factors for different metals

The rated sensing distance applies to the manufacturer's reference target. For another material, the approximate range is determined as Sn × the correction factor given below. The values are taken from the catalogue data of this model.

Technical specifications IN184131

Electrical connection IN184131

IN184131 uses the connection connector, 3 pins. The manufacturer states the number of pins: 3. Before connecting, compare the actual wiring with the diagram in the manufacturer's datasheet; pin and wire colour assignments should not be derived from the connector type alone.

Typical applications IN184131

• detecting the presence of a metal part
• checking the end position of a metal part
• non-contact counting of metal objects

How to choose the right variant

• Sensing distance 10 mm: this is the rated catalogue value. When designing, take into account the material and size of the target as well as the mounting conditions.
• Output DC 2-wire: must match the input type of the control system.
• Connection: Connector, 3 pins: the mating connector or cable must match the data in the datasheet.
• Degree of protection IP67: assess together with the specific environmental conditions and the connection method.

Frequently asked questions about IN184131

What is IN184131?

IN184131 is an inductive sensor made by IPF.

What is the sensing distance of IN184131?

The rated sensing distance is 10 mm.

What output does IN184131 have?

The electrical design is DC 2-wire.

How is IN184131 connected?

The manufacturer specifies the connection as connector, 3 pins. Check the exact wiring in the datasheet.