IN120107, IPF, inductive sensor, M12 × 61mm, Sn 4mm, 10-30V, PNP, NO, PVC cable 2m, 3 wires

IN120107 – IPF inductive sensor

IN120107 IPF is an inductive sensor designed for non-contact detection of the position and presence of metal objects. This variant has: design M12, overall length 61 mm, rated sensing distance 4 mm, supply 10–30 V, PNP output with NO contact, connection: PVC cable 2m, 3 wires.

Key features

• Sensing distance 4 mm – rated value according to the manufacturer's catalogue data.
• PNP / NO output – electrical design of this variant.
• Supply 10–30 V – permissible supply voltage range.
• Non-flush mounting – design of the active face according to the manufacturer.
• Connection: PVC cable 2m, 3 wires – electrical connection type of this variant.
• Degree of protection IP67 – degree of protection stated in the catalogue data.
• Ambient temperature -25–70°C – permissible temperature range according to the manufacturer.

How an inductive sensor works

The active face of the sensor generates an electromagnetic field. When a metal object approaches it, the resulting eddy currents change the state of the oscillator and the electronics evaluate this change at the output. Detection takes place without mechanical contact between the sensor and the target.

Correction factors for different metals

The rated sensing distance applies to the manufacturer's reference target. For another material, the approximate range is determined as Sn × the correction factor given below. The values are taken from the catalogue data of this model.

Technical specifications IN120107

Electrical connection IN120107

IN120107 uses the connection PVC cable 2m, 3 wires. The manufacturer states the number of wires: 3. Before connecting, compare the actual wiring with the diagram in the manufacturer's datasheet; pin and wire colour assignments should not be derived from the connector type alone.

Mounting IN120107

The active face is designed for non-flush mounting. Free space must remain around the face according to the manufacturer's installation drawing, otherwise surrounding metal may affect the range.

Typical applications IN120107

• detecting the presence of a metal part
• checking the end position of a metal part
• non-contact counting of metal objects

How to choose the right variant

• Sensing distance 4 mm: this is the rated catalogue value. When designing, take into account the material and size of the target as well as the mounting conditions.
• Non-flush version: check that the installation method matches the manufacturer's installation drawing.
• PNP output: must match the input type of the control system.
• NO contact: the output changes state when the target is detected.
• Connection: PVC cable 2m, 3 wires: the mating connector or cable must match the data in the datasheet.
• Degree of protection IP67: assess together with the specific environmental conditions and the connection method.

Frequently asked questions about IN120107

What is IN120107?

IN120107 is an inductive sensor made by IPF.

What is the sensing distance of IN120107?

The rated sensing distance is 4 mm.

What output does IN120107 have?

The electrical design is PNP / NO.

How is IN120107 connected?

The manufacturer specifies the connection as PVC cable 2m, 3 wires. Check the exact wiring in the datasheet.

What supply does IN120107 require?

The catalogue supply range is 10–30 V.