IN081270, IPF, inductive sensor, M8, Sn 3mm, 10V-30VDC, NPN, NC, connector M8

IN081270 – IPF inductive sensor

IN081270 IPF is an inductive sensor designed for non-contact detection of the position and presence of metal objects. This variant has: design M8, rated sensing distance 3 mm, supply 10 V-30 V DC, NPN output with NC contact, connection: connector M8.

Key features

• Sensing distance 3 mm – rated value according to the manufacturer's catalogue data.
• Output NPN / NC – electrical design of this variant.
• Supply 10 V-30 V DC – permissible supply voltage range.
• Connection: Connector M8 – electrical connection type of this variant.
• Degree of protection IP67 – degree of protection stated in the catalogue data.
• Ambient temperature -25 °C–70 °C – permissible temperature range according to the manufacturer.

How an inductive sensor works

The active face of the sensor generates an electromagnetic field. When a metal object approaches it, the resulting eddy currents change the state of the oscillator and the electronics evaluate this change at the output. Detection takes place without mechanical contact between the sensor and the target.

Correction factors for different metals

The rated sensing distance applies to the manufacturer's reference target. For another material, the approximate range is determined as Sn × the correction factor given below. The values are taken from the catalogue data of this model.

Technical specifications IN081270

Electrical connection IN081270

IN081270 uses the connection connector M8. Before connecting, compare the actual wiring with the diagram in the manufacturer's datasheet; pin and wire colour assignments should not be derived from the connector type alone.

Typical applications IN081270

• detecting the presence of a metal part
• checking the end position of a metal part
• non-contact counting of metal objects

How to choose the right variant

• Sensing distance 3 mm: this is the rated catalogue value. When designing, take into account the material and size of the target as well as the mounting conditions.
• Output NPN: must match the input type of the control system.
• NC contact: the contact logic is normally closed.
• Connection: Connector M8: the mating connector or cable must match the data in the datasheet.
• Degree of protection IP67: assess together with the specific environmental conditions and the connection method.

Frequently asked questions about IN081270

What is IN081270?

IN081270 is an inductive sensor made by IPF.

What is the sensing distance of IN081270?

The rated sensing distance is 3 mm.

What output does IN081270 have?

The electrical design is NPN / NC.

How is IN081270 connected?

The manufacturer specifies the connection as connector M8. Check the exact wiring in the datasheet.

What supply does IN081270 require?

The catalogue supply range is 10 V-30 V DC.