IB184200, IPF, inductive sensor, M18, Sn 5mm, DC 2-wire, Cable 2 m

IB184200 – IPF inductive sensor

IB184200 IPF is an inductive sensor designed for non-contact detection of the position and presence of metal objects. This variant has: design M18, rated sensing distance 5 mm, output DC 2-wire, connection: cable 2 m.

Key features

• Sensing distance 5 mm – rated value according to the manufacturer's catalogue data.
• Output DC 2-wire – electrical design of this variant.
• Flush mounting – design of the active face according to the manufacturer.
• Connection: Cable 2 m – electrical connection type of this variant.

How an inductive sensor works

The active face of the sensor generates an electromagnetic field. When a metal object approaches it, the resulting eddy currents change the state of the oscillator and the electronics evaluate this change at the output. Detection takes place without mechanical contact between the sensor and the target.

Correction factors for different metals

The rated sensing distance applies to the manufacturer's reference target. For another material, the approximate range is determined as Sn × the correction factor given below. The values are taken from the catalogue data of this model.

Technical specifications IB184200

Electrical connection IB184200

IB184200 uses the connection cable 2 m. Before connecting, compare the actual wiring with the diagram in the manufacturer's datasheet; pin and wire colour assignments should not be derived from the connector type alone.

Mounting IB184200

The active face is designed for flush mounting. The sensor can be installed in a metal surrounding according to the manufacturer's installation drawing.

Typical applications IB184200

• detecting the presence of a metal part
• checking the end position of a metal part
• non-contact counting of metal objects

How to choose the right variant

• Sensing distance 5 mm: this is the rated catalogue value. When designing, take into account the material and size of the target as well as the mounting conditions.
• Flush version: check that the installation method matches the manufacturer's installation drawing.
• Output DC 2-wire: must match the input type of the control system.
• Connection: Cable 2 m: the mating connector or cable must match the data in the datasheet.

Frequently asked questions about IB184200

What is IB184200?

IB184200 is an inductive sensor made by IPF.

What is the sensing distance of IB184200?

The rated sensing distance is 5 mm.

What output does IB184200 have?

The electrical design is DC 2-wire.

How is IB184200 connected?

The manufacturer specifies the connection as cable 2 m. Check the exact wiring in the datasheet.