IB0601A4, IPF, inductive sensor, Ø6.5mm × 16mm, Sn 1.5mm, 10-30VDC, PNP, NO, PUR cable 2 m, 3 wires

IB0601A4 – IPF inductive sensor

IB0601A4 IPF is an inductive sensor designed for non-contact detection of the position and presence of metal objects. This variant has: design Ø6.5 mm, overall length 16 mm, rated sensing distance 1.5 mm, supply 10–30 V DC, PNP output with NO contact, connection: PUR cable 2 m, 3 wires.

Key features

• Sensing distance 1.5 mm – rated value according to the manufacturer's catalogue data.
• PNP / NO output – electrical design of this variant.
• Supply 10–30 V DC – permissible supply voltage range.
• Flush mounting – design of the active face according to the manufacturer.
• Connection: PUR cable 2 m, 3 wires – electrical connection type of this variant.
• Degree of protection IP67 – degree of protection stated in the catalogue data.
• IO-Link communication – communication interface specified by the manufacturer.
• Ambient temperature -25–70 °C – permissible temperature range according to the manufacturer.

How an inductive sensor works

The active face of the sensor generates an electromagnetic field. When a metal object approaches it, the resulting eddy currents change the state of the oscillator and the electronics evaluate this change at the output. Detection takes place without mechanical contact between the sensor and the target.

Correction factors for different metals

The rated sensing distance applies to the manufacturer's reference target. For another material, the approximate range is determined as Sn × the correction factor given below. The values are taken from the catalogue data of this model.

Technical specifications IB0601A4

Electrical connection IB0601A4

IB0601A4 uses the connection PUR cable 2 m, 3 wires. The manufacturer states the number of wires: 3. Before connecting, compare the actual wiring with the diagram in the manufacturer's datasheet; pin and wire colour assignments should not be derived from the connector type alone.

Mounting IB0601A4

The active face is designed for flush mounting. The sensor can be installed in a metal surrounding according to the manufacturer's installation drawing.

Typical applications IB0601A4

• detecting the presence of a metal part
• checking the end position of a metal part
• non-contact counting of metal objects

How to choose the right variant

• Sensing distance 1.5 mm: this is the rated catalogue value. When designing, take into account the material and size of the target as well as the mounting conditions.
• Flush version: check that the installation method matches the manufacturer's installation drawing.
• PNP output: must match the input type of the control system.
• NO contact: the output changes state when the target is detected.
• Connection: PUR cable 2 m, 3 wires: the mating connector or cable must match the data in the datasheet.
• Degree of protection IP67: assess together with the specific environmental conditions and the connection method.

Frequently asked questions about IB0601A4

What is IB0601A4?

IB0601A4 is an inductive sensor made by IPF.

What is the sensing distance of IB0601A4?

The rated sensing distance is 1.5 mm.

What output does IB0601A4 have?

The electrical design is PNP / NO.

How is IB0601A4 connected?

The manufacturer specifies the connection as PUR cable 2 m, 3 wires. Check the exact wiring in the datasheet.

What supply does IB0601A4 require?

The catalogue supply range is 10–30 V DC.