LR12XBF02DNOW1, LANBAO, low-temperature inductive sensor, cylindrical, thread M12, Sn 2 mm, NPN, NO, cable 2 m
- Our price excl. VAT
- 24,77 €
- incl. VAT 21 %
- 29,97 €
Description
LR12XBF02DNOW1 – Inductive proximity sensor for low-temperature operation
LR12XBF02DNOW1 from LANBAO is an inductive proximity sensor for low-temperature operation in a cylindrical threaded design M12 designed for continuous industrial operation. It detects metal objects without contact in an ambient temperature range of −40 °C to +70 °C.
Key features
- Sensing distance 2 mm – rated value for a standard steel target.
- NPN output, NO contact – normally open – connects to a PLC digital input or a relay coil.
- Supply 10–30 V DC.
- Flush mounting.
- Connection: cable 2 m.
- Degree of protection IP67 – protection against dust and temporary immersion.
- Operating temperature −40 °C to +70 °C.
How an inductive sensor works
The coil in the sensing face generates a high-frequency magnetic field. When a metal object enters the field, it induces eddy currentsin its surface, which draw energy from the field and dampen it. As soon as the damping exceeds the set threshold, the evaluation circuit switches the output. All this happens without any contact, so the sensor has no mechanically wearing parts.
High-frequency oscillation principle: coil field, eddy currents in the metal target and their damping effect.
Correction factor – why the range on aluminium differs from steel
The rated sensing distance applies to a standard steel target. For other metals it is reduced by a correction factor. Calculate the actual distance as the rated Sn multiplied by the material factor.
| Steel St37 (standard target) | 1.0 |
|---|---|
| Cast iron | 0.93 – 1.05 |
| Aluminium | 0.60 – 1.00 |
| Stainless steel | 0.65 – 0.75 |
| Brass | 0.35 – 0.50 |
| Copper | 0.25 – 0.45 |
| Nickel | 0.25 – 0.45 |
Standard target and tolerance
According to the manufacturer's catalogue, the standard target is a square plate of St37 steel, 1 mm thick. The side length equals the larger of: the diameter of the sensing face, or three times the sensing distance. A smaller target means a shorter range. The sensing distance tolerance is ±10 %, so never set the working point exactly at the Sn limit.
Technical specifications LR12XBF02DNOW1
| Order code | LR12XBF02DNOW1 |
|---|---|
| Manufacturer | LANBAO |
| Sensor type | inductive sensor |
| Size / housing | cylindrical, thread M12 |
| Housing material | nickel alloy |
| Sensing distance (Sn) | 2 mm |
| Mounting / face design | flush |
| Output type | NPN |
| Contact function | NO – normally open |
| Supply voltage | 10–30 V DC |
| Connection | cable 2 m |
| Degree of protection | IP67 |
| Operating temperature | −40 °C to +70 °C |
| Detected material | metal objects |
| Typical applications | industrial automation, machines, production lines |
| HS code (TARIC) | 8536501999 |
| Country of origin | CN |
Wiring of LR12XBF02DNOW1 by wire colours
| Wire | Colour | Wiring |
|---|---|---|
| 1 | brown (BN) | + supply (L+), 10–30 V DC |
| 2 | blue (BU) | − supply (M / 0 V) |
| 3 | black (BK) | NPN output, NO – switches on detection; switches the negative pole – for a sourcing-type PLC input |
The colour coding complies with IEC 60947-5-2. Always compare the actual pin and wire assignment with the diagram in the sensor datasheet (Downloads tab).
Three-wire cable wiring according to IEC 60947-5-2.
Mounting and free space
The sensor has a flush sensing face, so it can be screwed into a metal structure right up to the face without affecting its function. The trade-off is a shorter sensing distance compared to the non-flush version.
Flush mounting: the face may be level with the metal.
Mutual interference of sensors
Two sensors mounted close to each other may interfere with each other. If you need to sense at two adjacent points, keep the lateral spacing given in the sensor's dimension drawing, or offset the sensors so that their faces do not point into the same space.
Set the working distance to 70 to 80 % of the rated Sn, i.e. safely below 2 mm for this model. The tolerance is ±10 % and the distance also changes with temperature and supply voltage.
The same sensor with a different connection
- LR12XBF02DNOW1-E2 – the same sensor with a connector M12/4 pins
The cable version is cheaper, but replacing the sensor requires pulling the entire cable. The connector variant can be replaced in a minute and is suitable where there is no time for downtime.
Typical applications
- refrigeration and freezer technology
- outdoor industrial automation in winter operation
- conveyors and handling equipment in cold environments
- detection of metal parts in operations below freezing
- machines exposed to low temperatures
How to choose and what to watch out for
- Flush mounting: the sensor can be screwed into a metal structure right up to the face without affecting its function. Compared to the non-flush variant, however, it has a shorter sensing distance.
- NPN output (switches minus) is used mainly in Asian equipment and selected PLCs. For standard European inputs, the PNP variant is usually more suitable.
- NO contact (normally open): the output is activated when an object is detected. If you need the opposite logic, an NC variant is available.
- Cable outlet: the cheaper variant, but replacing the sensor requires pulling the entire cable. If you need quick replacement, choose a model with a connector (suffix -E1 for M8, -E2 for M12).
- Degree of protection IP67: protection against dust and temporary immersion. Not designed for permanent immersion or high-pressure washing – this requires IP69K.
- Sensing distance 2 mm is the rated value for a standard steel target. For stainless steel, brass, aluminium or copper it is reduced by a reduction factor – if you detect non-ferrous metals, allow a margin or choose a model with correction factor 1.
PNP or NPN – and what happens if you mix them up
PNP switches the positive pole, so it sends plus to the PLC input. It is the European standard and matches standard digital inputs. NPN switches minus and is used mainly in Asian equipment. If mixed up, the sensor either does not switch at all or reports a permanently active state — it usually will not be damaged, but it will not work.
This model has a NPN. If you need PNP, a variant with the same sensing distance is available — contact us and we will recommend the code.
NO or NC – and why it is not just a matter of convenience
NO (normally open) is an output that is active on detection. NC (normally closed) is active at rest and opens on detection. The difference is a safety one: with NC, a broken wire causes the same reaction as a detection, so the fault shows up immediately. With NO, a broken cable remains unnoticed until someone tries to switch.
This model has the contact NO – normally open.
Similar models in the same series
Frequently asked questions
Does LR12XBF02DNOW1 have a PNP or NPN output?
LR12XBF02DNOW1 has an NPN output with an NO contact – normally open. Check that your PLC input matches this output type.
What is the sensing distance of LR12XBF02DNOW1?
The sensing distance (Sn) is 2 mm. This is the rated value for a standard steel target; the range is shorter for non-ferrous metals.
How is LR12XBF02DNOW1 connected?
LR12XBF02DNOW1 is supplied with the connection: cable 2 m. The cable is part of the sensor; the other end is free for connection to a terminal block.
How is LR12XBF02DNOW1 wired by wire colours?
Brown wire to supply plus, blue to minus, and black is the signal output going to the PLC input or relay coil. The coding complies with IEC 60947-5-2.
What is the operating temperature range?
The manufacturer specifies an operating temperature of −40 °C to +70 °C. The sensor is not intended for operation above +70 °C; when choosing the mounting location, take into account the temperature at the sensor itself.
A detailed datasheet with a dimension drawing and wiring diagram can be found in the tab Downloads.
We supply LR12XBF02DNOW1 from the Czech Republic with an invoice and technical support. Not sure which one to choose? Send us your application parameters and we will recommend a suitable model.
Do you have a sensor from another manufacturer on your machine – SICK, IFM, Balluff, Omron or Pepperl+Fuchs? Send us its order code and we will cross-reference it to the matching LANBAO model.
Technical parameters
| Objednací kód | LR12XBF02DNOW1 |
|---|---|
| Výrobce | Lanbao |
| Sensing | 2mm |
| Size | M12 |
| Mounting (flush/non-flush) | Yes |
| Connection | Cable 2m PVC |
| Power supply | 10-30VDC |
| Contact | NO |
| Output type | NPN |
| Overall length | 51mm |
Ask about this product
Related products
ST-800, SENSOR TESTER, sensor tester, PNP
ST-800
36,44 €
excl. VAT · 44,10 € incl. VAT
LR12XBF02DNCW, LANBAO, inductive sensor for high temperatures, cylindrical, thread M12, Sn 2 mm, NPN, NC, cable 2 m
LR12XBF02DNCW
24,77 €
excl. VAT · 29,97 € incl. VAT
LR12XBF02DNOW, LANBAO, inductive sensor for high temperatures, cylindrical, thread M12, Sn 2 mm, NPN, NO, cable 2 m
LR12XBF02DNOW
24,77 €
excl. VAT · 29,97 € incl. VAT
LR12XBF02DNCW1-E2, LANBAO, low-temperature inductive sensor, cylindrical, thread M12, Sn 2 mm, NPN, NC, connector M12/4 pins
LR12XBF02DNCW1-E2
24,77 €
excl. VAT · 29,97 € incl. VAT
LR12XBF02DNOW1-E2, LANBAO, low-temperature inductive sensor, cylindrical, thread M12, Sn 2 mm, NPN, NO, connector M12/4 pins
LR12XBF02DNOW1-E2
24,77 €
excl. VAT · 29,97 € incl. VAT
LR12XBF02DPCW1, LANBAO, low-temperature inductive sensor, cylindrical, thread M12, Sn 2 mm, PNP, NC, cable 2 m
LR12XBF02DPCW1
24,77 €
excl. VAT · 29,97 € incl. VAT
LR12XBF02DPOW1, LANBAO, low-temperature inductive sensor, cylindrical, thread M12, Sn 2 mm, PNP, NO, cable 2 m
LR12XBF02DPOW1
24,77 €
excl. VAT · 29,97 € incl. VAT
LR12XBF02DNCW1, LANBAO, low-temperature inductive sensor, cylindrical, thread M12, Sn 2 mm, NPN, NC, cable 2 m
LR12XBF02DNCW1
24,77 €
excl. VAT · 29,97 € incl. VAT
LR12XBF02DNCW-E2, LANBAO, inductive sensor for high temperatures, cylindrical, thread M12, Sn 2 mm, NPN, NC, connector M12/4 pins
LR12XBF02DNCW-E2
24,77 €
excl. VAT · 29,97 € incl. VAT
SENSOR TESTER, BOX-TYPE SENSOR TESTING DEVICE, PNP, NPN, NO and NC, Emas
SENSOR TESTER
27,15 €
excl. VAT · 32,85 € incl. VAT