CM12-08EBO-KC1, SICK, capacitive sensor M12x1, 0.5–8mm, PNP/NPN, connector M12 4pin

CM12-08EBO-KC1, SICK, capacitive sensor M12x1, 0.5–8mm, PNP/NPN, connector M12 4pin

CM12-08EBO-KC1 (SICK 6078709) is a cylindrical capacitive sensor with adjustable sensitivity. Sensing distance 0.5 mm–8 mm, PNP / NPN output; electrical connection Connector M12, 4-pin. The suitability for detecting a specific material is verified in the real installation.

Technical specifications

Working principle of a capacitive sensor

A capacitive sensor creates an electric field in front of the active face. An approaching material changes the capacitance of the measuring system and the electronics evaluate the switching state. Unlike an inductive sensor, it can also respond to non-metallic materials such as plastic, glass or liquid. The actual sensitivity depends on the material properties, humidity and installation geometry.

Typical applications of this variant

The threaded cylindrical design is suitable for detecting the presence of objects at conveyors, hoppers and machinery. The capacitive principle responds to changes in the electrical properties of the space in front of the active face and is not limited to metal objects.

Mounting and sensitivity adjustment

Installation: Flush / non-flush (depending on setting and mounting conditions). The effective range may differ between flush and non-flush installation. Set the sensitivity for the actual material, distance and surrounding metal parts. Before replacing with another sensor, check not only the size but also PNP/NPN, NO/NC, supply and wiring.

Wiring and correct selection

The variant offers a choice of PNP/NPN according to the electrical wiring. Before connecting to a PLC, check the output configuration, NO/NC function and pin assignment.

FAQ

Does the sensor detect only metal? No. The capacitive principle can also detect non-metallic substances; the effective distance depends on the material.

What is important when choosing a replacement? Order number, shape and mounting, range Sn, output, supply and the exact connection.

Is the stated distance always achievable? No. The manufacturer's parameter applies under specified conditions; after installation we recommend testing the detection of the specific target.

TECHNOLINE – technical note: The rated range is not a universal detection distance for all materials. For safety-critical applications, first verify the conditions in the manufacturer's datasheet and on the equipment.