MK5101, IFM, magnetic sensor, MKT3028BBPKG/G/0, 3M/ZH/AS
MK5101 IFM – magnetic sensor, M8, PNP. Industrial product for automation, detection or measurement.
Árfolyam 24,47 Kč / 1 EUR. Az árak tájékoztató jellegűek, a számlázás cseh koronában történik.
ifm magnetic sensors (e.g. MK5101) for sensing piston position on pneumatic cylinders with T-slot. Choose by slot, output and connection.
MK5101 IFM – magnetic sensor, M8, PNP. Industrial product for automation, detection or measurement.
Az árak tartalmazzák az újrahasznosítási díjat.
This category contains MK5101 with the full designation MKT3028BBPKG/G/0.3M/ZH/AS. When choosing a replacement, keep both codes: the short order number and the full version. IFM classifies MK5101 among sensors with a GMR cell, i.e. a semiconductor magnetoresistive principle; it is not a reed contact. See the IFM cylinder sensor overview.
MK5101 is designed for the T-slot. It has a PNP/NO switching output, 10–30 V DC supply and a PUR cable 0.3 m long with a three-contact A-coded M8, connector. The body measures 25 × 5 × 6.5 mm. These are parameters of the specific model according to the datasheet MK5101.
When comparing versions, separate the slot shape, output function and connection. Do not solve a requirement for a C-slot, a different output type or a long fixed cable just by matching the IFM brand. First draw up a list of machine requirements and confirm for each whether this specific code meets it.
For MK5101 the manufacturer specifies a fixing eccentric with a combined tool slot and an internal hexagon of 1.5 mm. A rubber positioning element and a cable clip are included in the delivery. The mounting design and package contents are documented by the Czech datasheet MK5101.
Include access to the fixing and space for the mating connector in the installation preparation. Check that the cable does not remain taut or caught when surrounding parts move. Before removing the original unit, document its position and cable route; after replacement, record the actually verified setting.
When replacing a sensor on a T-slot cylinder, MK5101 may be a candidate for an input expecting PNP/NO. However, complete the approval of the replacement only after comparing the drawing and wiring. Add the monitored position, the cable used and the result of the function test to the acceptance record; this creates a basis for future service of the same machine.
No. Also compare the connection method and the number and assignment of contacts. When replacing, it is not enough to check that the connectors look similar.
The piston position signal alone does not prove the clamping force or correct gripping of the part. The evaluation conditions for the whole operation must match the design and requirements of the machine.
Other versions can be compared among magnetic sensors. For connection use Sensor Cables and Connectors; help with assessing the assembly is available from technical support.
A technikai sütikre a kosár és a rendelés működéséhez van szükség — ezeket mindig használjuk. Az analitikai sütik megmutatják, mely oldalakat keresik az emberek és hol akadnak el, és segítenek javítani a webáruházat. Ezeket csak akkor használjuk, ha engedélyezi. Bővebben: adatkezelési tájékoztatóban.
Válassza ki, mely sütiket használhatunk. A választást bármikor módosíthatja.
Megőrzik a kosár tartalmát, a bejelentkezést és a kiválasztott nyelvet, és védik az űrlapokat a visszaélésektől. Nélkülük a rendelés nem fejezhető be, ezért hozzájárulás nélkül is használjuk őket.
A Google Analytics összesített formában mutatja meg a weboldal látogatottságát és a felhasználói viselkedést. Ebből tudjuk meg, mely oldalak nem működnek jól. Ezek alapján senkit nem azonosítunk.