Silencers

Silencers for pneumatic valve exhausts reduce the noise of escaping air. Choose by thread and flow.

Filtros
Encontrado 33 productos
NUESTRO CONSEJO

AN40-04, SMC, pneumatic exhaust silencer, thread R1/2, body size 40

N.º cat.: AN40-04

AN40-04, SMC: pneumatic exhaust silencer. thread R1/2, body size 40. Use in pneumatic distribution and verified mounting criteria.

Bajo consulta
11,67 €
sin IVA · 14,12 € con IVA

ANA1-04, SMC, pneumatic exhaust silencer, thread R1/2, body size 1

N.º cat.: ANA1-04

ANA1-04, SMC: pneumatic exhaust silencer. thread R1/2, body size 1. Use in pneumatic distribution and verified mounting criteria.

Bajo consulta
13,92 €
sin IVA · 16,84 € con IVA

AN500-06, SMC, pneumatic exhaust silencer, thread R3/4, body size 500

N.º cat.: AN500-06

AN500-06, SMC: pneumatic exhaust silencer. thread R3/4, body size 500. Use in pneumatic distribution and verified mounting criteria.

Bajo consulta
20,88 €
sin IVA · 25,27 € con IVA

ANA1-06, SMC, pneumatic exhaust silencer, thread R3/4, body size 1

N.º cat.: ANA1-06

ANA1-06, SMC: pneumatic exhaust silencer. thread R3/4, body size 1. Use in pneumatic distribution and verified mounting criteria.

Bajo consulta
22,93 €
sin IVA · 27,74 € con IVA

ANA1-10, SMC, pneumatic exhaust silencer, thread R1, body size 1

N.º cat.: ANA1-10

ANA1-10, SMC: pneumatic exhaust silencer. thread R1, body size 1. Use in pneumatic distribution and verified mounting criteria.

Bajo consulta
34,80 €
sin IVA · 42,11 € con IVA

RBC0806, SMC, shock absorber, nominal size Ø8mm and stroke 6mm

N.º cat.: RBC0806

RBC0806, SMC: shock absorber. nominal size Ø8mm and stroke 6mm. Use in pneumatic distribution and verified mounting criteria.

Bajo consulta
54,86 €
sin IVA · 66,38 € con IVA

AN800-14, SMC, pneumatic exhaust silencer, thread R1½, body size 800, catalogue flow rate max. 50m³/min (ANR) at 0.5MPa

N.º cat.: AN800-14

AN800-14, SMC: pneumatic exhaust silencer. thread R1½, body size 800, catalogue flow rate max. 50m³/min (ANR) at 0.5MPa. Use in pneumatic distribution and verified mounting criteria.

Bajo consulta
56,09 €
sin IVA · 67,87 € con IVA

YSR-16-20-C, Festo, self-adjusting shock absorber, stroke 20mm, energy 30J/zdvih

N.º cat.: YSR-16-20-C

YSR-16-20-C, Festo: self-adjusting shock absorber. stroke 20mm, energy 30J/zdvih. Use in pneumatic distribution and verified mounting criteria.

Bajo consulta
162,13 €
sin IVA · 196,18 € con IVA

Los precios incluyen la tasa de reciclaje.

Silencers

The listing includes the designations TBSL, TBSLM, TBESL and SMC AN, ANA1 or ANB1. When designing, start with the specific exhaust point: a single valve has a different requirement than the common exhaust of several branches working simultaneously.

Choose attenuation and flow capacity together

The ANA1 and ANB1 series have sound-absorbing material and the manufacturer distinguishes them by connection and flow characteristics. Therefore assess the silencer simultaneously in terms of noise and exhaust resistance. The noise reduction value alone is not enough to decide whether the given version will suit your cycle.

Compare, for example, the range AN110-01 a ANB1-C10. SMC AN document distinguishes threaded and push-in variants. Check the connection letter and the full code in the model table; the general silencer designation does not by itself determine the interface.

The manufacturer's graphs ANA1/ANB1 are for the initial state. For the noise comparison, they state a supply pressure of 0.5 MPa and a measuring point one metre diagonally in front of the source at an angle of 45 degrees. The result from this arrangement is not automatically the resulting noise level of the whole production room.

Mounting and operational check

SMC mounting instructions distinguishes plastic body, sintered metal and other metal bodies. Do not use a pipe wrench or pliers on plastic or sintered parts. For versions with specified flats, use the appropriate spanner. Do not transfer the instruction for additional turning of a plastic thread to other materials and designs.

Clogging can increase exhaust resistance and impair the function of the pneumatic circuit. SMC requires replacement before the circuit is affected and verification of the absence of residual pressure before replacement. For these products, the whole silencer is replaced; do not replace the absorbing filling alone. Monitor changes in actuator operation together with changes in sound.

For diagnostics, we recommend our own simple protocol: record the stroke time, the pressure on the exhaust branch during the same cycle and the designation of the fitted silencer. Compare the record with the measurement after professional replacement with a corresponding new piece. Always change one condition so that the result can be evaluated. Record noise at the same place with the same number of simultaneously working branches. For a common exhaust, draw the order of their switching in the protocol. Otherwise, a different operating state may outweigh the benefit of replacement and the comparison of two measurements will be misleading. Motion adjustment is also related to the category Flow control valves.

Our own model: two sound sources

The following numbers are purely model values, not parameters of the offered silencers. Imagine two independent sources at the same measuring point: the exhaust with a level of 98 dB and the rest of the machine operation with a level of 76 dB. Let us assume that a hypothetical measure reduces only the exhaust contribution by 28 dB, i.e. to 70 dB, while the rest of the operation remains the same.

The logarithmic sum after the modification is 10 × log10(10^(70/10) + 10^(76/10)) ≈ 77.0 dB. Before the modification, it is similarly approximately 98.0 dB. The total reduction is therefore about 21 dB, even though we reduced the exhaust alone by twenty-eight in the model. The second source became decisive. The calculation assumes comparable measurements and uncorrelated contributions; it does not replace measurement of the actual machine.

FAQ

Why does a quieter exhaust not yet confirm correct function?

In the report, also evaluate the cycle time. A quieter sound without a comparable working result does not by itself prove a successful solution.

Can a silencer also adjust the flow?

Such a design exists: Pneuflex BESL uses an adjusting screw and securing of its position. However, verify this function for the specific version; it does not follow from the general silencer designation.

Cookies en este sitio web

Necesitamos las cookies técnicas para que funcionen el carrito y el pedido — se usan siempre. Las cookies analíticas nos muestran qué páginas buscan las personas y dónde se pierden, y nos ayudan a mejorar la tienda. Solo las usaremos si nos lo permites. Más información en la política de tratamiento de datos.