Laser Through-Beam Sensors (Receiver + Emitter)

Lanbao and TECHNOLINE laser through-beam sensors with emitter and receiver for long range and precise detection. Choose by range and output.

Filtros
Encontrado 6 productos
EN STOCK

PSE-TM30DL + PSE-TM30DPRL, LANBAO, laser through-beam light barrier, emitter and receiver, 30m, PNP, NO and NC, Cable, 1…

N.º cat.: PSE-TM30DL + PSE-TM30DPRL

PSE-TM30DL + PSE-TM30DPRL from LANBAO: laser through-beam light barrier, emitter and receiver, 30m, PNP, NO and NC, Cable, 10-30VDC. Parameters and availabilis…

En stock 1 ks
53,13 €
sin IVA · 64,29 € con IVA

PSE-TM30DL + PSE-TM30DNRL, LANBAO, laser through-beam light barrier, emitter and receiver, 30m, NPN, NO and NC, Cable, 1…

N.º cat.: PSE-TM30DL + PSE-TM30DNRL

PSE-TM30DL + PSE-TM30DNRL from LANBAO: laser through-beam light barrier, emitter and receiver, 30m, NPN, NO and NC, Cable, 10-30VDC. Parameters and availabilis…

Bajo consulta
53,13 €
sin IVA · 64,29 € con IVA

PSE-TM30DL-E3 + PSE-TM30DNRL-E3, LANBAO, laser through-beam light barrier, emitter and receiver, 30m, NPN, NO and NC, Ko…

N.º cat.: PSE-TM30DL-E3 + PSE-TM30DNRL-E3

PSE-TM30DL-E3 + PSE-TM30DNRL-E3 from LANBAO: laser through-beam light barrier, emitter and receiver, 30m, NPN, NO and NC, Connector M8, 10-30VDC. Parameters…

Bajo consulta
53,13 €
sin IVA · 64,29 € con IVA

PSE-TM30DL-E3 + PSE-TM30DPRL-E3, LANBAO, laser through-beam light barrier, emitter and receiver, 30m, PNP, NO and NC, Ko…

N.º cat.: PSE-TM30DL-E3 + PSE-TM30DPRL-E3

PSE-TM30DL-E3 + PSE-TM30DPRL-E3 from LANBAO: laser through-beam light barrier, emitter and receiver, 30m, PNP, NO and NC, Connector M8, 10-30VDC. Parameters…

Bajo consulta
53,13 €
sin IVA · 64,29 € con IVA
−30 % NUESTRO CONSEJO

TLS0001, TECHNOLINE, laser through-beam light barrier, emitter + receiver, 30m, PNP, NO and NC, connector M8/4 pins

N.º cat.: TLS0001

TLS0001 TECHNOLINE – laser through-beam light barrier, 30m, PNP, NO and NC, connector M8/4 pins. For precise optical detection in machines and automation.

Bajo consulta
145,84 € 208,34 €
sin IVA · 176,46 € con IVA

Los precios incluyen la tasa de reciclaje.

Through-beam laser barriers: emitter and receiver

Direct optical path

A through-beam barrier uses a separate emitter and receiver on opposite sides of the monitored space. The object changes the received light by interrupting the beam. No reflector is needed, but the electrical and mechanical connection must be prepared on both sides. A narrow beam can help monitor small objects; the detection capability is also determined by the geometry of the object and the properties of the specific model.

Selection data: through-beam laser barriers (receiver + emitter)

Step What to document
Identification full designations of emitter and receiver
Operating requirements beam path and object size
Acceptance axis, detection interval and control response

Verification of the whole pair

The listing includes LANBAO PSE-TM30 pairs and TECHNOLINE assemblies TLS0001 or TLS0002. Confirm the exact designations of the emitter and receiver and whether both are included in the delivery. Distinguish the emitter supply from the receiver output. An identical housing or similar connector does not prove a compatible pair; for a replacement, record both original designations.

Adjustment and mechanical stability

During mounting, assess the optical axis in the worst permitted position of the frame. A long distance can magnify the effect of a small angular shift. Access for adjustment and sufficiently rigid brackets are therefore just as important as space for the housings themselves. After final tightening, repeat the test and check that cables or covers do not intrude into the beam.

Angular deviation model

A purely geometric example: at a distance of 5 m and an axis deviation of 0.1° the lateral offset 5 × tan(0.1°) is approximately 8.7 mm. This is not the permitted deviation of any series or data on the beam diameter. The example explains why a seemingly small change in the bracket can show up at the opposite receiver.

Signal acceptance and application

Verify the clear path, interruption by the actual object, the smallest monitored part and the operating speed. Record the selected output logic, supply, PNP/NPN and the response of the downstream input. Confirm the laser class and instructions for its use according to the documentation. A standard laser process barrier is not automatically a safety light curtain intended for personnel protection.

FAQ

Can the receiver and emitter be purchased independently?

Only if they are precisely identified and the manufacturer confirms their joint function. Also check the scope of the specific delivery.

Is it enough to increase the sensitivity in case of a fault?

First check the axis, brackets, contamination, supply and the actual state of the beam.

Related selection: Diffuse laser sensors (reflection from material) · Retro-reflective laser sensors (with reflector).

Documents for further verification: manufacturer's documentation.

Cookies en este sitio web

Necesitamos las cookies técnicas para que funcionen el carrito y el pedido — se usan siempre. Las cookies analíticas nos muestran qué páginas buscan las personas y dónde se pierden, y nos ayudan a mejorar la tienda. Solo las usaremos si nos lo permites. Más información en la política de tratamiento de datos.