Pneumatic accessories

SMC, Pneuflex and other pneumatic accessories – push-in fittings, threaded fittings, reducers, flow control valves, silencers, plugs, blow guns and suction cups. Choose by tube diameter and connection thread.

Subcategorías

Filtros
Encontrado 696 productos
NUESTRO CONSEJO EN STOCK

TPP04, TECHNOLINE, plug-in plug for push-in port, Ø4mm stem for push-in port

N.º cat.: TPP04

TPP04, TECHNOLINE: plug-in plug for push-in port. Ø4mm stem for push-in port. Use in pneumatic distribution and verified mounting criteria.

En stock 5 uds. o más · en múltiplos de 10 uds.
0,25 €
sin IVA · 0,30 € con IVA
NUESTRO CONSEJO EN STOCK

TPP06, TECHNOLINE, plug-in plug for push-in port, Ø6mm stem for push-in port

N.º cat.: TPP06

TPP06, TECHNOLINE: plug-in plug for push-in port. Ø6mm stem for push-in port. Use in pneumatic distribution and verified mounting criteria.

En stock 5 uds. o más · en múltiplos de 10 uds.
0,25 €
sin IVA · 0,30 € con IVA
NUESTRO CONSEJO EN STOCK

TPP08, TECHNOLINE, plug-in plug for push-in port, Ø8mm stem for push-in port

N.º cat.: TPP08

TPP08, TECHNOLINE: plug-in plug for push-in port. Ø8mm stem for push-in port. Use in pneumatic distribution and verified mounting criteria.

En stock 5 uds. o más · en múltiplos de 10 uds.
0,25 €
sin IVA · 0,30 € con IVA
NUESTRO CONSEJO EN STOCK

TPP10, TECHNOLINE, plug-in plug for push-in port, Ø10mm stem for push-in port

N.º cat.: TPP10

TPP10, TECHNOLINE: plug-in plug for push-in port. Ø10mm stem for push-in port. Use in pneumatic distribution and verified mounting criteria.

En stock 5 uds. o más · en múltiplos de 5 uds.
0,25 €
sin IVA · 0,30 € con IVA
NUESTRO CONSEJO EN STOCK

TSPIM-G01, TECHNOLINE, threaded plug with internal hexagon, male thread G1/8, closing a hole, TSPIM version

N.º cat.: TSPIM-G01

TSPIM-G01, TECHNOLINE: threaded plug with internal hexagon. male thread G1/8, closing a hole, TSPIM version. Use in pneumatic distribution and verified mounting criteria.

En stock 5 uds. o más
0,28 €
sin IVA · 0,33 € con IVA
NUESTRO CONSEJO EN STOCK

TPP12, TECHNOLINE, plug-in plug for push-in port, Ø12mm stem for push-in port

N.º cat.: TPP12

TPP12, TECHNOLINE: plug-in plug for push-in port. Ø12mm stem for push-in port. Use in pneumatic distribution and verified mounting criteria.

En stock 5 uds. o más · en múltiplos de 5 uds.
0,29 €
sin IVA · 0,36 € con IVA
NUESTRO CONSEJO EN STOCK

TSPIM-G02, TECHNOLINE, threaded plug with internal hexagon, male thread G1/4, closing a hole, TSPIM version

N.º cat.: TSPIM-G02

TSPIM-G02, TECHNOLINE: threaded plug with internal hexagon. male thread G1/4, closing a hole, TSPIM version. Use in pneumatic distribution and verified mounting criteria.

En stock 5 uds. o más
0,35 €
sin IVA · 0,43 € con IVA
NUESTRO CONSEJO EN STOCK

TSPHM-G01, TECHNOLINE, threaded plug with internal hexagon, male thread G1/8, closing a hole, nickel-plated brass, NBR O-ring

N.º cat.: TSPHM-G01

TSPHM-G01, TECHNOLINE: threaded plug with internal hexagon. male thread G1/8, closing a hole, nickel-plated brass, NBR O-ring. Use in pneumatic distribution and verified mounting criteria.

En stock 5 uds. o más
0,39 €
sin IVA · 0,48 € con IVA
NUESTRO CONSEJO EN STOCK

TSPIM-G03, TECHNOLINE, threaded plug with internal hexagon, male thread G3/8, closing a hole, TSPIM version

N.º cat.: TSPIM-G03

TSPIM-G03, TECHNOLINE: threaded plug with internal hexagon. male thread G3/8, closing a hole, TSPIM version. Use in pneumatic distribution and verified mounting criteria.

En stock 5 uds. o más
0,43 €
sin IVA · 0,52 € con IVA
NUESTRO CONSEJO EN STOCK

TSPPM-G01, TECHNOLINE, threaded plug with external hexagon, male thread G1/8, closing a hole, TSPPM version

N.º cat.: TSPPM-G01

TSPPM-G01, TECHNOLINE: threaded plug with external hexagon. male thread G1/8, closing a hole, TSPPM version. Use in pneumatic distribution and verified mounting criteria.

En stock 5 uds. o más
0,44 €
sin IVA · 0,54 € con IVA
NUESTRO CONSEJO EN STOCK

TSPHM-G02, TECHNOLINE, threaded plug with internal hexagon, male thread G1/4, closing a hole, nickel-plated brass, NBR O-ring

N.º cat.: TSPHM-G02

TSPHM-G02, TECHNOLINE: threaded plug with internal hexagon. male thread G1/4, closing a hole, nickel-plated brass, NBR O-ring. Use in pneumatic distribution and verified mounting criteria.

En stock 5 uds. o más
0,49 €
sin IVA · 0,59 € con IVA
NUESTRO CONSEJO EN STOCK

TSPIM-G04, TECHNOLINE, threaded plug with internal hexagon, male thread G1/2, closing a hole, TSPIM version

N.º cat.: TSPIM-G04

TSPIM-G04, TECHNOLINE: threaded plug with internal hexagon. male thread G1/2, closing a hole, TSPIM version. Use in pneumatic distribution and verified mounting criteria.

En stock 5 uds. o más
0,51 €
sin IVA · 0,62 € con IVA
NUESTRO CONSEJO EN STOCK

TPU04, TECHNOLINE, straight fitting for Ø4mm tube

N.º cat.: TPU04

TPU04, TECHNOLINE, straight fitting for Ø4mm tube. Straight connection of two tubes; suitable for extending a pneumatic route without a thread.

En stock 5 uds. o más · en múltiplos de 10 uds.
0,54 €
sin IVA · 0,65 € con IVA
NUESTRO CONSEJO EN STOCK

TSPPM-G02, TECHNOLINE, threaded plug with external hexagon, male thread G1/4, closing a hole, TSPPM version

N.º cat.: TSPPM-G02

TSPPM-G02, TECHNOLINE: threaded plug with external hexagon. male thread G1/4, closing a hole, TSPPM version. Use in pneumatic distribution and verified mounting criteria.

En stock 5 uds. o más
0,54 €
sin IVA · 0,65 € con IVA
NUESTRO CONSEJO EN STOCK

TPU06, TECHNOLINE, straight fitting for Ø6mm tube

N.º cat.: TPU06

TPU06, TECHNOLINE, straight fitting for Ø6mm tube. Straight connection of two tubes; suitable for extending a pneumatic route without a thread.

En stock 5 uds. o más · en múltiplos de 10 uds.
0,59 €
sin IVA · 0,71 € con IVA
NUESTRO CONSEJO EN STOCK

TPV04, TECHNOLINE, elbow fitting 90° for Ø4mm tube

N.º cat.: TPV04

TPV04, TECHNOLINE, elbow fitting 90° for Ø4mm tube. Change of line direction by 90° without a sharp tube bend right at the joint.

En stock 5 uds. o más · en múltiplos de 10 uds.
0,59 €
sin IVA · 0,71 € con IVA
EN STOCK

TPG06-04, TECHNOLINE, straight push-in reducing fitting, larger line Ø6mm → smaller Ø4mm

N.º cat.: TPG06-04

TPG06-04, TECHNOLINE: straight push-in reducing fitting. larger line Ø6mm → smaller Ø4mm. Use in pneumatic distribution and verified mounting criteria.

En stock 5 uds. o más · en múltiplos de 10 uds.
0,59 €
sin IVA · 0,71 € con IVA
NUESTRO CONSEJO EN STOCK

TBSL-G01, TECHNOLINE, sintered bronze silencer, male thread G1/8

N.º cat.: TBSL-G01

TBSL-G01, TECHNOLINE: sintered bronze silencer. male thread G1/8. Use in pneumatic distribution and verified mounting criteria.

En stock 5 uds. o más · en múltiplos de 5 uds.
0,59 €
sin IVA · 0,71 € con IVA
NUESTRO CONSEJO EN STOCK

TBSLM-G01, TECHNOLINE, compact sintered bronze silencer, male thread G1/8

N.º cat.: TBSLM-G01

TBSLM-G01, TECHNOLINE: compact sintered bronze silencer. male thread G1/8. Use in pneumatic distribution and verified mounting criteria.

En stock 5 uds. o más · en múltiplos de 5 uds.
0,59 €
sin IVA · 0,71 € con IVA
NUESTRO CONSEJO EN STOCK

TSPHM-G03, TECHNOLINE, threaded plug with internal hexagon, male thread G3/8, closing a hole, nickel-plated brass, NBR O-ring

N.º cat.: TSPHM-G03

TSPHM-G03, TECHNOLINE: threaded plug with internal hexagon. male thread G3/8, closing a hole, nickel-plated brass, NBR O-ring. Use in pneumatic distribution and verified mounting criteria.

En stock 5 uds. o más
0,59 €
sin IVA · 0,71 € con IVA
NUESTRO CONSEJO EN STOCK

TSPHM-G04, TECHNOLINE, threaded plug with internal hexagon, male thread G1/2, closing a hole, nickel-plated brass, NBR O-ring

N.º cat.: TSPHM-G04

TSPHM-G04, TECHNOLINE: threaded plug with internal hexagon. male thread G1/2, closing a hole, nickel-plated brass, NBR O-ring. Use in pneumatic distribution and verified mounting criteria.

En stock 5 uds. o más
0,63 €
sin IVA · 0,76 € con IVA
NUESTRO CONSEJO EN STOCK

TPU08, TECHNOLINE, straight fitting for Ø8mm tube

N.º cat.: TPU08

TPU08, TECHNOLINE, straight fitting for Ø8mm tube. Straight connection of two tubes; suitable for extending a pneumatic route without a thread.

En stock 5 uds. o más · en múltiplos de 10 uds.
0,63 €
sin IVA · 0,76 € con IVA
NUESTRO CONSEJO EN STOCK

TPV06, TECHNOLINE, elbow fitting 90° for Ø6mm tube

N.º cat.: TPV06

TPV06, TECHNOLINE, elbow fitting 90° for Ø6mm tube. Change of line direction by 90° without a sharp tube bend right at the joint.

En stock 5 uds. o más · en múltiplos de 10 uds.
0,63 €
sin IVA · 0,76 € con IVA
EN STOCK

TPG08-04, TECHNOLINE, straight push-in reducing fitting, larger line Ø8mm → smaller Ø4mm

N.º cat.: TPG08-04

TPG08-04, TECHNOLINE: straight push-in reducing fitting. larger line Ø8mm → smaller Ø4mm. Use in pneumatic distribution and verified mounting criteria.

En stock 5 uds. o más · en múltiplos de 10 uds.
0,63 €
sin IVA · 0,76 € con IVA
EN STOCK

TPG08-06, TECHNOLINE, straight push-in reducing fitting, larger line Ø8mm → smaller Ø6mm

N.º cat.: TPG08-06

TPG08-06, TECHNOLINE: straight push-in reducing fitting. larger line Ø8mm → smaller Ø6mm. Use in pneumatic distribution and verified mounting criteria.

En stock 5 uds. o más · en múltiplos de 10 uds.
0,63 €
sin IVA · 0,76 € con IVA

Los precios incluyen la tasa de reciclaje.

Pneumatic accessories

Pneumatic accessories connect individual parts of the air circuit and help adapt its arrangement to a specific machine. When selecting, you need to know not only the part designation, but also both connected counterparts, the required function and operating conditions. A similar appearance of fittings or the same brand do not by themselves confirm interchangeability. This category is a signpost for line design, air distribution, flow adjustment and vacuum gripping.

Select the branch according to the task in the circuit

  • Threaded fitting: connection to a specific threaded port of the equipment.
  • Push-in fittings: selecting a connection for the corresponding pipe or tube.
  • Bulkhead fittings: passing the line through a panel with resolved fixing.
  • Reducing fittings: connecting different connection sizes.
  • Flow control valves: flow adjustment taking into account the direction and function of the valve.
  • Silencers: exhaust accessories, which are also selected according to flow requirements.
  • Blanking plugs: closing the connection with a corresponding version.
  • Blow gun: manual work with air according to the rules of the given workplace.
  • Pneumatic suction cups: contact of the vacuum gripper with the surface of the handled part.

Three checks before ordering

Mechanical interface: record the full connection designation on both sides. For the tube, distinguish the outer and inner diameter; for the thread, its type, size and sealing method. Also check the space for mounting and service; the correct part may not be suitable for an installation that is too tight.

Function: draw where the medium should flow from and to. Connecting, branching, blanking, throttling and gripping are different tasks. For more complex accessories, compare the diagram and the full order code, not just the first part of the name.

Operating conditions: verify the permissible medium, pressure, temperature and environment for the specific version in the manufacturer's documentation. Assess use in vacuum separately. Do not derive the permitted range of the whole assembly from a parameter of one of its elements.

Model list of connection points

Let us consider four workstations, each with two separate lines. If each line forms one uninterrupted section, eight sections have a total of sixteen ends to connect. Dividing all eight sections into two parts adds eight intermediate fittings and sixteen more tube ends. This is our own inventory example, not a calculation of pressure loss or probability of leakage. It helps reveal missing counterparts and distinguish a spare piece from a part actually needed in the assembly.

Mounting and troubleshooting

Before intervention, shut down the equipment according to its instructions and secure it against unexpected movement. Disconnect lines only after safely removing pressure; for vacuum gripping, first secure the transported object. Take the mounting procedure, tightening and insertion check from the instructions of the specific accessory. After assembly, verify tightness, actual function and maintenance access during controlled commissioning.

In case of a leak, first determine its location, then check the counterpart, line size, seal condition and mechanical stress on the joint. In case of slow movement, monitor the whole supply and exhaust. Random replacement of one part without verifying the cause can leave the original problem in another part of the circuit.

FAQ

Can I replace a fitting based on a photo?

A photo helps determine the shape. For ordering, however, add dimensions, exact connection, function and operating limitations. For a replacement, record the original code and also compare the counterpart.

How to prepare documentation for selecting accessories?

Attach a simple circuit diagram, a list of connections, tube sizes and operating conditions. Mark what you already have and what should be part of the delivery; this makes the list and the compatibility check more precise.

Cookies en este sitio web

Necesitamos las cookies técnicas para que funcionen el carrito y el pedido — se usan siempre. Las cookies analíticas nos muestran qué páginas buscan las personas y dónde se pierden, y nos ayudan a mejorar la tienda. Solo las usaremos si nos lo permites. Más información en la política de tratamiento de datos.